| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200612112213.GH1551@shell.armlinux.org.uk>
Date: Fri, 12 Jun 2020 12:22:13 +0100
From: Russell King - ARM Linux admin <linux@...linux.org.uk>
To: Sascha Hauer <s.hauer@...gutronix.de>
Cc: Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, kernel@...gutronix.de
Subject: Re: [PATCH v2] net: mvneta: Fix Serdes configuration for 2.5Gbps
modes
On Fri, Jun 12, 2020 at 11:42:08AM +0100, Russell King - ARM Linux admin wrote:
> On Fri, Jun 12, 2020 at 11:18:20AM +0100, Russell King - ARM Linux admin wrote:
> > On Fri, Jun 12, 2020 at 11:01:15AM +0100, Russell King - ARM Linux admin wrote:
> > > On Fri, Jun 12, 2020 at 09:47:10AM +0100, Russell King - ARM Linux admin wrote:
> > > > On Fri, Jun 12, 2020 at 10:38:47AM +0200, Sascha Hauer wrote:
> > > > > The Marvell MVNETA Ethernet controller supports a 2.5Gbps SGMII mode
> > > > > called DRSGMII. Depending on the Port MAC Control Register0 PortType
> > > > > setting this seems to be either an overclocked SGMII mode or 2500BaseX.
> > > > >
> > > > > This patch adds the necessary Serdes Configuration setting for the
> > > > > 2.5Gbps modes. There is no phy interface mode define for overclocked
> > > > > SGMII, so only 2500BaseX is handled for now.
> > > > >
> > > > > As phy_interface_mode_is_8023z() returns true for both
> > > > > PHY_INTERFACE_MODE_1000BASEX and PHY_INTERFACE_MODE_2500BASEX we
> > > > > explicitly test for 1000BaseX instead of using
> > > > > phy_interface_mode_is_8023z() to differentiate the different
> > > > > possibilities.
> > > > >
> > > > > Fixes: da58a931f248f ("net: mvneta: Add support for 2500Mbps SGMII")
> > > > > Signed-off-by: Sascha Hauer <s.hauer@...gutronix.de>
> > > >
> > > > 2500base-X is used today on Armada 388 and Armada 3720 platforms and
> > > > works - it is known to interoperate with Marvell PP2.2 hardware, as
> > > > well was various SFPs such as the Huawei MA5671A at 2.5Gbps. The way
> > > > it is handled on these platforms is via the COMPHY, requesting that
> > > > the serdes is upclocked from 1.25Gbps to 3.125Gbps.
> > > >
> > > > This "DRSGMII" mode is not mentioned in the functional specs for either
> > > > the Armada 388 or Armada 3720, the value you poke into the register is
> > > > not mentioned either. As I've already requested, some information on
> > > > exactly what this "DRSGMII" is would be very useful, it can't be
> > > > "double-rate SGMII" because that would give you 2Gbps instead of 1Gbps.
> > > >
> > > > So, I suspect this breaks the platforms that are known to work.
> > > >
> > > > We need a proper description of what DRSGMII is before we can consider
> > > > taking any patches for it.
> > >
> > > Okay, having dug through the Armada XP, 370, 388, 3720 specs, I think
> > > this is fine after all - but something that will help for the future
> > > would be to document that this register does not exist on the 388 and
> > > 3720 devices (which brings up the question whether we should be writing
> > > it there.) The field was moved into the comphy on those devices.
> > >
> > > So, it looks like if we have a comphy, we should not be writing this
> > > register.
> > >
> > > What's more, the write to MVNETA_SERDES_CFG should not be in
> > > mvneta_port_power_up(); it's likely that XP and 370 will not work
> > > properly with phylink. It needs to be done in a similar location to
> > > mvneta_comphy_init(), so that phylink can switch between 1G and 2.5G
> > > speeds.
> > >
> > > As you have an Armada XP system, you are best placed to test moving
> > > that write.
> >
> > Here's my suggestion - it won't apply to mainline or net* trees, but
> > gives you the idea I'm proposing:
> >
> > diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
> > index 9e25d608d856..17db74d61bc2 100644
> > --- a/drivers/net/ethernet/marvell/mvneta.c
> > +++ b/drivers/net/ethernet/marvell/mvneta.c
> > @@ -107,9 +107,11 @@
> > #define MVNETA_TX_IN_PRGRS BIT(1)
> > #define MVNETA_TX_FIFO_EMPTY BIT(8)
> > #define MVNETA_RX_MIN_FRAME_SIZE 0x247c
> > +/* Only exists on Armada XP and Armada 370 */
> > #define MVNETA_SERDES_CFG 0x24A0
> > -#define MVNETA_SGMII_SERDES_PROTO 0x0cc7
> > #define MVNETA_QSGMII_SERDES_PROTO 0x0667
> > +#define MVNETA_SGMII_SERDES_PROTO 0x0cc7
> > +#define MVNETA_HSGMII_SERDES_PROTO 0x1107
> > #define MVNETA_TYPE_PRIO 0x24bc
> > #define MVNETA_FORCE_UNI BIT(21)
> > #define MVNETA_TXQ_CMD_1 0x24e4
> > @@ -3457,9 +3459,6 @@ static int mvneta_comphy_init(struct mvneta_port *pp)
> > {
> > int ret;
> >
> > - if (!pp->comphy)
> > - return 0;
> > -
> > ret = phy_set_mode_ext(pp->comphy, PHY_MODE_ETHERNET,
> > pp->phy_interface);
> > if (ret)
> > @@ -3468,11 +3467,47 @@ static int mvneta_comphy_init(struct mvneta_port *pp)
> > return phy_power_on(pp->comphy);
> > }
> >
> > +static int mvneta_config_interface(struct mvneta_port *pp,i
> > + phy_interface_t interface)
> > +{
> > + int ret = 0;
> > +
> > + if (pp->comphy) {
> > + if (interface == PHY_INTERFACE_MODE_SGMII ||
> > + interface == PHY_INTERFACE_MODE_1000BASEX ||
> > + interface == PHY_INTERFACE_MODE_2500BASEX) {
> > + ret = mvneta_comphy_init(pp);
> > + }
> > + } else {
> > + switch (interface) {
> > + case PHY_INTERFACE_MODE_QSGMII:
> > + mvreg_write(pp, MVNETA_SERDES_CFG,
> > + MVNETA_QSGMII_SERDES_PROTO);
> > + break;
> > +
> > + case PHY_INTERFACE_MODE_SGMII:
> > + case PHY_INTERFACE_MODE_1000BASEX:
> > + mvreg_write(pp, MVNETA_SERDES_CFG,
> > + MVNETA_SGMII_SERDES_PROTO);
> > + break;
> > +
> > + case PHY_INTERFACE_MODE_2500BASEX:
> > + mvreg_write(pp, MVNETA_SERDES_CFG,
> > + MVNETA_HSGMII_SERDES_PROTO);
> > + break;
> > + }
> > + }
> > +
> > + pp->phy_interface = interface;
> > +
> > + return ret;
> > +}
> > +
> > static void mvneta_start_dev(struct mvneta_port *pp)
> > {
> > int cpu;
> >
> > - WARN_ON(mvneta_comphy_init(pp));
> > + WARN_ON(mvneta_config_interface(pp, pp->phy_interface));
> >
> > mvgmac_set_max_rx_size(&pp->gmac, pp->pkt_size);
> > mvneta_txq_max_tx_size_set(pp, pp->pkt_size);
> > @@ -3702,14 +3737,9 @@ static int mvneta_pcs_config(struct phylink_config *config,
> > /* We should never see Asym_Pause set */
> > WARN_ON(phylink_test(advertising, Asym_Pause));
> >
> > - if (pp->comphy && pp->phy_interface != interface &&
> > - (interface == PHY_INTERFACE_MODE_SGMII ||
> > - interface == PHY_INTERFACE_MODE_1000BASEX ||
> > - interface == PHY_INTERFACE_MODE_2500BASEX)) {
> > - pp->phy_interface = interface;
> > -
> > + if (pp->phy_interface != interface) {
> > WARN_ON(phy_power_off(pp->comphy));
> > - WARN_ON(mvneta_comphy_init(pp));
> > + mvneta_config_interface(pp, interface);
> > }
> >
> > if (want_1ms_clock) {
> > @@ -4794,12 +4824,10 @@ static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
> > /* MAC Cause register should be cleared */
> > mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0);
> >
> > - if (phy_mode == PHY_INTERFACE_MODE_QSGMII)
> > - mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO);
> > - else if (phy_mode == PHY_INTERFACE_MODE_SGMII ||
> > - phy_interface_mode_is_8023z(phy_mode))
> > - mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
> > - else if (!phy_interface_mode_is_rgmii(phy_mode))
> > + if (phy_mode != PHY_INTERFACE_MODE_QSGMII &&
> > + phy_mode != PHY_INTERFACE_MODE_SGMII &&
> > + !phy_interface_mode_is_8023z(phy_mode) &&
> > + !phy_interface_mode_is_rgmii(phy_mode))
> > return -EINVAL;
> >
> > return 0;
>
> With the obvious mistakes fixed (extraneous 'i' and lack of default
> case), it seems to still work on Armada 388 Clearfog Pro with 2.5G
> modules.
... and the other bug fixed - mvneta_comphy_init() needs to be passed
the interface mode.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
Powered by blists - more mailing lists