netdev - Re: [PATCH] e1000e: continue to init phy even when failed to disable ULP

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <4CC928F1-02CC-4675-908E-42B26C151FA1@canonical.com>
Date:   Tue, 16 Jun 2020 19:23:53 +0800
From:   Kai-Heng Feng <kai.heng.feng@...onical.com>
To:     Aaron Ma <aaron.ma@...onical.com>
Cc:     Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        "moderated list:INTEL ETHERNET DRIVERS" 
        <intel-wired-lan@...ts.osuosl.org>, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, vitaly.lifshits@...el.com,
        sasha.neftin@...el.com
Subject: Re: [PATCH] e1000e: continue to init phy even when failed to disable
 ULP



> On Jun 16, 2020, at 18:05, Aaron Ma <aaron.ma@...onical.com> wrote:
> 
> After commit "e1000e: disable s0ix entry and exit flows for ME systems",
> some ThinkPads always failed to disable ulp by ME.
> commit "e1000e: Warn if disabling ULP failed" break out of init phy:
> 
> error log:
> [   42.364753] e1000e 0000:00:1f.6 enp0s31f6: Failed to disable ULP
> [   42.524626] e1000e 0000:00:1f.6 enp0s31f6: PHY Wakeup cause - Unicast Packet
> [   42.822476] e1000e 0000:00:1f.6 enp0s31f6: Hardware Error
> 
> When disable s0ix, E1000_FWSM_ULP_CFG_DONE will never be 1.
> If continue to init phy like before, it can work as before.
> iperf test result good too.
> 
> Chnage e_warn to e_dbg, in case it confuses.
> 
> Signed-off-by: Aaron Ma <aaron.ma@...onical.com>
> ---
> drivers/net/ethernet/intel/e1000e/ich8lan.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
> index f999cca37a8a..63405819eb83 100644
> --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
> +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
> @@ -302,8 +302,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
> 	hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_unknown;
> 	ret_val = e1000_disable_ulp_lpt_lp(hw, true);

If si0x entry isn't enabled, maybe skip calling e1000_disable_ulp_lpt_lp() altogether?
We can use e1000e_check_me() to check that.

> 	if (ret_val) {
> -		e_warn("Failed to disable ULP\n");
> -		goto out;
> +		e_dbg("Failed to disable ULP\n");
> 	}

The change of "e1000e: Warn if disabling ULP failed" is intentional to catch bugs like this.

Kai-Heng

> 
> 	ret_val = hw->phy.ops.acquire(hw);
> -- 
> 2.26.2
>