| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <56140515-f116-91f8-b126-9b62bdce0022@ucloud.cn>
Date: Wed, 17 Jun 2020 10:29:41 +0800
From: wenxu <wenxu@...oud.cn>
To: Pablo Neira Ayuso <pablo@...filter.org>
Cc: netdev@...r.kernel.org, davem@...emloft.net, vladbu@...lanox.com
Subject: Re: [PATCH net v3 3/4] net/sched: cls_api: fix nooffloaddevcnt
warning dmesg log
On 6/17/2020 4:17 AM, Pablo Neira Ayuso wrote:
> On Tue, Jun 16, 2020 at 11:19:39AM +0800, wenxu@...oud.cn wrote:
>> From: wenxu <wenxu@...oud.cn>
>>
>> When a indr device add in offload success. The block->nooffloaddevcnt
>> should be 0. After the representor go away. When the dir device go away
>> the flow_block UNBIND operation with -EOPNOTSUPP which lead the warning
>> dmesg log.
>>
>> The block->nooffloaddevcnt should always count for indr block.
>> even the indr block offload successful. The representor maybe
>> gone away and the ingress qdisc can work in software mode.
>>
>> block->nooffloaddevcnt warning with following dmesg log:
>>
>> [ 760.667058] #####################################################
>> [ 760.668186] ## TEST test-ecmp-add-vxlan-encap-disable-sriov.sh ##
>> [ 760.669179] #####################################################
>> [ 761.780655] :test: Fedora 30 (Thirty)
>> [ 761.783794] :test: Linux reg-r-vrt-018-180 5.7.0+
>> [ 761.822890] :test: NIC ens1f0 FW 16.26.6000 PCI 0000:81:00.0 DEVICE 0x1019 ConnectX-5 Ex
>> [ 761.860244] mlx5_core 0000:81:00.0 ens1f0: Link up
>> [ 761.880693] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f0: link becomes ready
>> [ 762.059732] mlx5_core 0000:81:00.1 ens1f1: Link up
>> [ 762.234341] :test: unbind vfs of ens1f0
>> [ 762.257825] :test: Change ens1f0 eswitch (0000:81:00.0) mode to switchdev
>> [ 762.291363] :test: unbind vfs of ens1f1
>> [ 762.306914] :test: Change ens1f1 eswitch (0000:81:00.1) mode to switchdev
>> [ 762.309237] mlx5_core 0000:81:00.1: E-Switch: Disable: mode(LEGACY), nvfs(2), active vports(3)
>> [ 763.282598] mlx5_core 0000:81:00.1: E-Switch: Supported tc offload range - chains: 4294967294, prios: 4294967295
>> [ 763.362825] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>> [ 763.444465] mlx5_core 0000:81:00.1 ens1f1: renamed from eth0
>> [ 763.460088] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>> [ 763.502586] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>> [ 763.552429] ens1f1_0: renamed from eth0
>> [ 763.569569] mlx5_core 0000:81:00.1: E-Switch: Enable: mode(OFFLOADS), nvfs(2), active vports(3)
>> [ 763.629694] ens1f1_1: renamed from eth1
>> [ 764.631552] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1_0: link becomes ready
>> [ 764.670841] :test: unbind vfs of ens1f0
>> [ 764.681966] :test: unbind vfs of ens1f1
>> [ 764.726762] mlx5_core 0000:81:00.0 ens1f0: Link up
>> [ 764.766511] mlx5_core 0000:81:00.1 ens1f1: Link up
>> [ 764.797325] :test: Add multipath vxlan encap rule and disable sriov
>> [ 764.798544] :test: config multipath route
>> [ 764.812732] mlx5_core 0000:81:00.0: lag map port 1:2 port 2:2
>> [ 764.874556] mlx5_core 0000:81:00.0: modify lag map port 1:1 port 2:2
>> [ 765.603681] :test: OK
>> [ 765.659048] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1_1: link becomes ready
>> [ 765.675085] :test: verify rule in hw
>> [ 765.694237] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f0: link becomes ready
>> [ 765.711892] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1: link becomes ready
>> [ 766.979230] :test: OK
>> [ 768.125419] :test: OK
>> [ 768.127519] :test: - disable sriov ens1f1
>> [ 768.131160] pci 0000:81:02.2: Removing from iommu group 75
>> [ 768.132646] pci 0000:81:02.3: Removing from iommu group 76
>> [ 769.179749] mlx5_core 0000:81:00.1: E-Switch: Disable: mode(OFFLOADS), nvfs(2), active vports(3)
>> [ 769.455627] mlx5_core 0000:81:00.0: modify lag map port 1:1 port 2:1
>> [ 769.703990] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>> [ 769.988637] mlx5_core 0000:81:00.1 ens1f1: renamed from eth0
>> [ 769.990022] :test: - disable sriov ens1f0
>> [ 769.994922] pci 0000:81:00.2: Removing from iommu group 73
>> [ 769.997048] pci 0000:81:00.3: Removing from iommu group 74
>> [ 771.035813] mlx5_core 0000:81:00.0: E-Switch: Disable: mode(OFFLOADS), nvfs(2), active vports(3)
>> [ 771.339091] ------------[ cut here ]------------
>> [ 771.340812] WARNING: CPU: 6 PID: 3448 at net/sched/cls_api.c:749 tcf_block_offload_unbind.isra.0+0x5c/0x60
>> [ 771.341728] Modules linked in: act_mirred act_tunnel_key cls_flower dummy vxlan ip6_udp_tunnel udp_tunnel sch_ingress nfsv3 nfs_acl nfs lockd grace fscache tun bridge stp llc sunrpc rdma_ucm rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp mlxfw act_ct nf_flow_table kvm_intel nf_nat kvm nf_conntrack irqbypass crct10dif_pclmul igb crc32_pclmul nf_defrag_ipv6 libcrc32c nf_defrag_ipv4 crc32c_intel ghash_clmulni_intel ptp ipmi_ssif intel_cstate pps_c
>> ore ses intel_uncore mei_me iTCO_wdt joydev ipmi_si iTCO_vendor_support i2c_i801 enclosure mei ioatdma dca lpc_ich wmi ipmi_devintf pcspkr acpi_power_meter ipmi_msghandler acpi_pad ast i2c_algo_bit drm_vram_helper drm_kms_helper drm_ttm_helper ttm drm mpt3sas raid_class scsi_transport_sas
>> [ 771.347818] CPU: 6 PID: 3448 Comm: test-ecmp-add-v Not tainted 5.7.0+ #1146
>> [ 771.348727] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
>> [ 771.349646] RIP: 0010:tcf_block_offload_unbind.isra.0+0x5c/0x60
>> [ 771.350553] Code: 4a fd ff ff 83 f8 a1 74 0e 5b 4c 89 e7 5d 41 5c 41 5d e9 07 93 89 ff 8b 83 a0 00 00 00 8d 50 ff 89 93 a0 00 00 00 85 c0 75 df <0f> 0b eb db 0f 1f 44 00 00 41 57 41 56 41 55 41 89 cd 41 54 49 89
>> [ 771.352420] RSP: 0018:ffffb33144cd3b00 EFLAGS: 00010246
>> [ 771.353353] RAX: 0000000000000000 RBX: ffff8b37cf4b2800 RCX: 0000000000000000
>> [ 771.354294] RDX: 00000000ffffffff RSI: ffff8b3b9aad0000 RDI: ffffffff8d5c6e20
>> [ 771.355245] RBP: ffff8b37eb546948 R08: ffffffffc0b7a348 R09: ffff8b3b9aad0000
>> [ 771.356189] R10: 0000000000000001 R11: ffff8b3ba7a0a1c0 R12: ffff8b37cf4b2850
>> [ 771.357123] R13: ffff8b3b9aad0000 R14: ffff8b37cf4b2820 R15: ffff8b37cf4b2820
>> [ 771.358039] FS: 00007f8a19b6e740(0000) GS:ffff8b3befa00000(0000) knlGS:0000000000000000
>> [ 771.358965] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> [ 771.359885] CR2: 00007f3afb91c1a0 CR3: 000000045133c004 CR4: 00000000001606e0
>> [ 771.360825] Call Trace:
>> [ 771.361764] __tcf_block_put+0x84/0x150
>> [ 771.362712] ingress_destroy+0x1b/0x20 [sch_ingress]
>> [ 771.363658] qdisc_destroy+0x3e/0xc0
>> [ 771.364594] dev_shutdown+0x7a/0xa5
>> [ 771.365522] rollback_registered_many+0x20d/0x530
>> [ 771.366458] ? netdev_upper_dev_unlink+0x15d/0x1c0
>> [ 771.367387] unregister_netdevice_many.part.0+0xf/0x70
>> [ 771.368310] vxlan_netdevice_event+0xa4/0x110 [vxlan]
>> [ 771.369454] notifier_call_chain+0x4c/0x70
>> [ 771.370579] rollback_registered_many+0x2f5/0x530
>> [ 771.371719] rollback_registered+0x56/0x90
>> [ 771.372843] unregister_netdevice_queue+0x73/0xb0
>> [ 771.373982] unregister_netdev+0x18/0x20
>> [ 771.375168] mlx5e_vport_rep_unload+0x56/0xc0 [mlx5_core]
>> [ 771.376327] esw_offloads_disable+0x81/0x90 [mlx5_core]
>> [ 771.377512] mlx5_eswitch_disable_locked.cold+0xcb/0x1af [mlx5_core]
>> [ 771.378679] mlx5_eswitch_disable+0x44/0x60 [mlx5_core]
>> [ 771.379822] mlx5_device_disable_sriov+0xad/0xb0 [mlx5_core]
>> [ 771.380968] mlx5_core_sriov_configure+0xc1/0xe0 [mlx5_core]
>> [ 771.382087] sriov_numvfs_store+0xfc/0x130
>> [ 771.383195] kernfs_fop_write+0xce/0x1b0
>> [ 771.384302] vfs_write+0xb6/0x1a0
>> [ 771.385410] ksys_write+0x5f/0xe0
>> [ 771.386500] do_syscall_64+0x5b/0x1d0
>> [ 771.387569] entry_SYSCALL_64_after_hwframe+0x44/0xa9
>>
>> Fixes: 0fdcf78d5973 ("net: use flow_indr_dev_setup_offload()")
>> Signed-off-by: wenxu <wenxu@...oud.cn>
>> ---
>> net/sched/cls_api.c | 24 ++++++++++++++----------
>> 1 file changed, 14 insertions(+), 10 deletions(-)
>>
>> diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
>> index a00a203..86c3937 100644
>> --- a/net/sched/cls_api.c
>> +++ b/net/sched/cls_api.c
>> @@ -671,25 +671,29 @@ static int tcf_block_offload_cmd(struct tcf_block *block,
>> struct netlink_ext_ack *extack)
>> {
>> struct flow_block_offload bo = {};
>> - int err;
>>
>> tcf_block_offload_init(&bo, dev, command, ei->binder_type,
>> &block->flow_block, tcf_block_shared(block),
>> extack);
>>
>> - if (dev->netdev_ops->ndo_setup_tc)
>> + if (dev->netdev_ops->ndo_setup_tc) {
>> + int err;
>> +
>> err = dev->netdev_ops->ndo_setup_tc(dev, TC_SETUP_BLOCK, &bo);
>> - else
>> - err = flow_indr_dev_setup_offload(dev, TC_SETUP_BLOCK, block,
>> - &bo, tc_block_indr_cleanup);
>> + if (err < 0) {
>> + if (err != -EOPNOTSUPP)
>> + NL_SET_ERR_MSG(extack, "Driver ndo_setup_tc failed");
>> + return err;
>> + }
>>
>> - if (err < 0) {
>> - if (err != -EOPNOTSUPP)
>> - NL_SET_ERR_MSG(extack, "Driver ndo_setup_tc failed");
>> - return err;
>> + return tcf_block_setup(block, &bo);
>> }
>>
>> - return tcf_block_setup(block, &bo);
>> + flow_indr_dev_setup_offload(dev, TC_SETUP_BLOCK, block, &bo,
>> + tc_block_indr_cleanup);
>> + tcf_block_setup(block, &bo);
>> +
>> + return -EOPNOTSUPP;
> So tcf_block_offload_cmd() always return -EOPNOTSUPP for _BIND and
> _UNBIND operations after this patch ?
yes, The original design for tc subsystem block->nooffloaddevcnt should
always inc for indr tunnel.
>
Powered by blists - more mailing lists