[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200618123055.GA17496@x1.vandijck-laurijssen.be>
Date: Thu, 18 Jun 2020 14:30:55 +0200
From: Kurt Van Dijck <dev.kurt@...dijck-laurijssen.be>
To: Marc Kleine-Budde <mkl@...gutronix.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
wg@...ndegger.com, kernel@...tin.sperl.org,
linux-can@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 0/6] Add Microchip MCP25XXFD CAN driver
On do, 18 jun 2020 00:36:29 +0200, Marc Kleine-Budde wrote:
> On 6/17/20 6:59 PM, Kurt Van Dijck wrote:
> > I'm in the process of getting a Variscite imx8m mini SOM online, with
>
> Have your heard about the imx8m plus? It has CAN cores! We have a board in the
> office to play with. :)
>
> > MCP2517FD. The 4.19 kernel that comes with it, has a driver that is
>
> You shall not start projects with 1,5 years old kernel.
> And you probably shall not use vendor kernel for new projects.
> :D
your rpi kernel starts of v4.19.119 (or so), where the variscite starts
of v4.19.35.
The result was quite some list of merge conflicts, on top of a vendor
kernel, so I took your advise and switched to the latest and greatest
5.7.3.
Luckily, we need no sound (yet) and no video. :-)
>
> Not much, some bus off cleanups, however I've backported all changes to
> v4.19-rpi/mcp25xxfd-20200429-41 (debug and log is still included).
>
> When you port this to your mx8 take all from (including)
>
> 097701d1ea4f can: dev: avoid long lines
> to
> v4.19-rpi/mcp25xxfd-20200429-41
>
I'll merge one of your latest ...
Kurt
Powered by blists - more mailing lists