| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <E1jlwcy-0005Hw-IR@rmk-PC.armlinux.org.uk>
Date: Thu, 18 Jun 2020 16:38:56 +0100
From: Russell King <rmk+kernel@...linux.org.uk>
To: Antoine Tenart <antoine.tenart@...tlin.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>
Cc: "David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org
Subject: [PATCH net-next 3/4] net: mvpp2: add register modification helper
Add a helper to read-modify-write a register, and use it in the phylink
helpers.
Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
---
.../net/ethernet/marvell/mvpp2/mvpp2_main.c | 88 ++++++++++---------
1 file changed, 46 insertions(+), 42 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 8c8314715efd..9edd8fbf18a6 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -1132,6 +1132,17 @@ static bool mvpp2_is_xlg(phy_interface_t interface)
interface == PHY_INTERFACE_MODE_XAUI;
}
+static void mvpp2_modify(void __iomem *ptr, u32 mask, u32 set)
+{
+ u32 old, val;
+
+ old = val = readl(ptr);
+ val &= ~mask;
+ val |= set;
+ if (old != val)
+ writel(val, ptr);
+}
+
static void mvpp22_gop_init_rgmii(struct mvpp2_port *port)
{
struct mvpp2 *priv = port->priv;
@@ -4947,38 +4958,29 @@ static void mvpp2_mac_an_restart(struct phylink_config *config)
static void mvpp2_xlg_config(struct mvpp2_port *port, unsigned int mode,
const struct phylink_link_state *state)
{
- u32 old_ctrl0, ctrl0;
- u32 old_ctrl4, ctrl4;
-
- old_ctrl0 = ctrl0 = readl(port->base + MVPP22_XLG_CTRL0_REG);
- old_ctrl4 = ctrl4 = readl(port->base + MVPP22_XLG_CTRL4_REG);
-
- ctrl0 |= MVPP22_XLG_CTRL0_MAC_RESET_DIS;
+ u32 val;
+ val = MVPP22_XLG_CTRL0_MAC_RESET_DIS;
if (state->pause & MLO_PAUSE_TX)
- ctrl0 |= MVPP22_XLG_CTRL0_TX_FLOW_CTRL_EN;
- else
- ctrl0 &= ~MVPP22_XLG_CTRL0_TX_FLOW_CTRL_EN;
+ val |= MVPP22_XLG_CTRL0_TX_FLOW_CTRL_EN;
if (state->pause & MLO_PAUSE_RX)
- ctrl0 |= MVPP22_XLG_CTRL0_RX_FLOW_CTRL_EN;
- else
- ctrl0 &= ~MVPP22_XLG_CTRL0_RX_FLOW_CTRL_EN;
-
- ctrl4 &= ~(MVPP22_XLG_CTRL4_MACMODSELECT_GMAC |
- MVPP22_XLG_CTRL4_EN_IDLE_CHECK);
- ctrl4 |= MVPP22_XLG_CTRL4_FWD_FC | MVPP22_XLG_CTRL4_FWD_PFC;
-
- if (old_ctrl0 != ctrl0)
- writel(ctrl0, port->base + MVPP22_XLG_CTRL0_REG);
- if (old_ctrl4 != ctrl4)
- writel(ctrl4, port->base + MVPP22_XLG_CTRL4_REG);
-
- if (!(old_ctrl0 & MVPP22_XLG_CTRL0_MAC_RESET_DIS)) {
- while (!(readl(port->base + MVPP22_XLG_CTRL0_REG) &
- MVPP22_XLG_CTRL0_MAC_RESET_DIS))
- continue;
- }
+ val |= MVPP22_XLG_CTRL0_RX_FLOW_CTRL_EN;
+
+ mvpp2_modify(port->base + MVPP22_XLG_CTRL0_REG,
+ MVPP22_XLG_CTRL0_MAC_RESET_DIS |
+ MVPP22_XLG_CTRL0_TX_FLOW_CTRL_EN |
+ MVPP22_XLG_CTRL0_RX_FLOW_CTRL_EN, val);
+ mvpp2_modify(port->base + MVPP22_XLG_CTRL4_REG,
+ MVPP22_XLG_CTRL4_MACMODSELECT_GMAC |
+ MVPP22_XLG_CTRL4_EN_IDLE_CHECK |
+ MVPP22_XLG_CTRL4_FWD_FC | MVPP22_XLG_CTRL4_FWD_PFC,
+ MVPP22_XLG_CTRL4_FWD_FC | MVPP22_XLG_CTRL4_FWD_PFC);
+
+ /* Wait for reset to deassert */
+ do {
+ val = readl(port->base + MVPP22_XLG_CTRL0_REG);
+ } while (!(val & MVPP22_XLG_CTRL0_MAC_RESET_DIS));
}
static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode,
@@ -5158,19 +5160,14 @@ static void mvpp2_mac_link_up(struct phylink_config *config,
if (mvpp2_is_xlg(interface)) {
if (!phylink_autoneg_inband(mode)) {
- val = readl(port->base + MVPP22_XLG_CTRL0_REG);
- val &= ~MVPP22_XLG_CTRL0_FORCE_LINK_DOWN;
- val |= MVPP22_XLG_CTRL0_FORCE_LINK_PASS;
- writel(val, port->base + MVPP22_XLG_CTRL0_REG);
+ mvpp2_modify(port->base + MVPP22_XLG_CTRL0_REG,
+ MVPP22_XLG_CTRL0_FORCE_LINK_DOWN |
+ MVPP22_XLG_CTRL0_FORCE_LINK_PASS,
+ MVPP22_XLG_CTRL0_FORCE_LINK_PASS);
}
} else {
if (!phylink_autoneg_inband(mode)) {
- val = readl(port->base + MVPP2_GMAC_AUTONEG_CONFIG);
- val &= ~(MVPP2_GMAC_FORCE_LINK_DOWN |
- MVPP2_GMAC_CONFIG_MII_SPEED |
- MVPP2_GMAC_CONFIG_GMII_SPEED |
- MVPP2_GMAC_CONFIG_FULL_DUPLEX);
- val |= MVPP2_GMAC_FORCE_LINK_PASS;
+ val = MVPP2_GMAC_FORCE_LINK_PASS;
if (speed == SPEED_1000 || speed == SPEED_2500)
val |= MVPP2_GMAC_CONFIG_GMII_SPEED;
@@ -5180,20 +5177,27 @@ static void mvpp2_mac_link_up(struct phylink_config *config,
if (duplex == DUPLEX_FULL)
val |= MVPP2_GMAC_CONFIG_FULL_DUPLEX;
- writel(val, port->base + MVPP2_GMAC_AUTONEG_CONFIG);
+ mvpp2_modify(port->base + MVPP2_GMAC_AUTONEG_CONFIG,
+ MVPP2_GMAC_FORCE_LINK_DOWN |
+ MVPP2_GMAC_FORCE_LINK_PASS |
+ MVPP2_GMAC_CONFIG_MII_SPEED |
+ MVPP2_GMAC_CONFIG_GMII_SPEED |
+ MVPP2_GMAC_CONFIG_FULL_DUPLEX, val);
}
/* We can always update the flow control enable bits;
* these will only be effective if flow control AN
* (MVPP2_GMAC_FLOW_CTRL_AUTONEG) is disabled.
*/
- val = readl(port->base + MVPP22_GMAC_CTRL_4_REG);
- val &= ~(MVPP22_CTRL4_RX_FC_EN | MVPP22_CTRL4_TX_FC_EN);
+ val = 0;
if (tx_pause)
val |= MVPP22_CTRL4_TX_FC_EN;
if (rx_pause)
val |= MVPP22_CTRL4_RX_FC_EN;
- writel(val, port->base + MVPP22_GMAC_CTRL_4_REG);
+
+ mvpp2_modify(port->base + MVPP22_GMAC_CTRL_4_REG,
+ MVPP22_CTRL4_RX_FC_EN | MVPP22_CTRL4_TX_FC_EN,
+ val);
}
mvpp2_port_enable(port);
--
2.20.1
Powered by blists - more mailing lists