netdev - Re: [PATCH 0/6] Add Microchip MCP25XXFD CAN driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 22 Jun 2020 14:43:47 +0200
From:   Kurt Van Dijck <dev.kurt@...dijck-laurijssen.be>
To:     Marc Kleine-Budde <mkl@...gutronix.de>,
        Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
        wg@...ndegger.com, kernel@...tin.sperl.org,
        linux-can@...r.kernel.org, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH 0/6] Add Microchip MCP25XXFD CAN driver

Marc,

I get RX-0: FIFO overflows in listen-only mode (back-to-back burst of
the single other node).
The SPI peripheral does not use DMA :-(.
Do you have, by accident, some freescale SPI fixes lying around?

It's not the biggest problem on my side, but is proves the system not
being guarded against load.

Kurt

On ma, 22 jun 2020 14:30:31 +0200, Kurt Van Dijck wrote:
> 
> On ma, 22 jun 2020 12:55:41 +0200, Marc Kleine-Budde wrote:
> > On 6/22/20 12:25 PM, Kurt Van Dijck wrote:
> > > I got my board up with a 5.7, despite device-tree problems completely
> > > unrelated to CAN.
> > 
> > \o/
> > 
> > > It seems to work well with a fully-loaded CAN bus (cangen -g0 ...).
> > > So that is a real improvement.
> > 
> > Can I add your Tested-by?
> yes.
> > 
> > > I will need to add the listen-only mode soon.
> > 
> > Patches are always welcome!
> > 
> > regards,
> > Marc