netdev - [PATCH v4 0/2] net: phy: call phy_disable_interrupts() in phy_init

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 24 Jun 2020 15:57:57 +0800
From:   Jisheng Zhang <Jisheng.Zhang@...aptics.com>
To:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>
Cc:     netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v4 0/2] net: phy: call phy_disable_interrupts() in
 phy_init_hw()

We face an issue with rtl8211f, a pin is shared between INTB and PMEB,
and the PHY Register Accessible Interrupt is enabled by default, so
the INTB/PMEB pin is always active in polling mode case.

As Heiner pointed out "I was thinking about calling
phy_disable_interrupts() in phy_init_hw(), to have a defined init
state as we don't know in which state the PHY is if the PHY driver is
loaded. We shouldn't assume that it's the chip power-on defaults, BIOS
or boot loader could have changed this. Or in case of dual-boot
systems the other OS could leave the PHY in whatever state."

patch1 makes phy_disable_interrupts() non-static so that it could be used
in phy_init_hw() to have a defined init state.

patch2 calls phy_disable_interrupts() in phy_init_hw() to have a
defined init state.

Since v3:
  - call phy_disable_interrupts() have interrupts disabled first then
    config_init, thank Florian

Since v2:
  - Don't export phy_disable_interrupts() but just make it non-static

Since v1:
  - EXPORT the correct symbol

Jisheng Zhang (2):
  net: phy: make phy_disable_interrupts() non-static
  net: phy: call phy_disable_interrupts() in phy_init_hw()

 drivers/net/phy/phy.c        | 2 +-
 drivers/net/phy/phy_device.c | 4 ++++
 include/linux/phy.h          | 1 +
 3 files changed, 6 insertions(+), 1 deletion(-)

-- 
2.27.0