[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200629213738.1180618-3-elder@linaro.org>
Date: Mon, 29 Jun 2020 16:37:37 -0500
From: Alex Elder <elder@...aro.org>
To: davem@...emloft.net, kuba@...nel.org
Cc: evgreen@...omium.org, subashab@...eaurora.org,
cpratapa@...eaurora.org, bjorn.andersson@...aro.org,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH net-next 2/3] net: ipa: standarize more GSI error messages
Make minor updates to error messages reported in "gsi.c":
- Use local variables to reduce multi-line function calls
- Don't use parentheses in messages
- Do some slight rewording in a few cases
Signed-off-by: Alex Elder <elder@...aro.org>
---
drivers/net/ipa/gsi.c | 57 ++++++++++++++++++++++---------------------
1 file changed, 29 insertions(+), 28 deletions(-)
diff --git a/drivers/net/ipa/gsi.c b/drivers/net/ipa/gsi.c
index 7e4e54ee09b1..f8d5b8d86335 100644
--- a/drivers/net/ipa/gsi.c
+++ b/drivers/net/ipa/gsi.c
@@ -336,6 +336,7 @@ static int evt_ring_command(struct gsi *gsi, u32 evt_ring_id,
{
struct gsi_evt_ring *evt_ring = &gsi->evt_ring[evt_ring_id];
struct completion *completion = &evt_ring->completion;
+ struct device *dev = gsi->dev;
u32 val;
val = u32_encode_bits(evt_ring_id, EV_CHID_FMASK);
@@ -344,8 +345,8 @@ static int evt_ring_command(struct gsi *gsi, u32 evt_ring_id,
if (gsi_command(gsi, GSI_EV_CH_CMD_OFFSET, val, completion))
return 0; /* Success! */
- dev_err(gsi->dev, "GSI command %u to event ring %u timed out "
- "(state is %u)\n", opcode, evt_ring_id, evt_ring->state);
+ dev_err(dev, "GSI command %u for event ring %u timed out, state %u\n",
+ opcode, evt_ring_id, evt_ring->state);
return -ETIMEDOUT;
}
@@ -431,6 +432,7 @@ gsi_channel_command(struct gsi_channel *channel, enum gsi_ch_cmd_opcode opcode)
struct completion *completion = &channel->completion;
u32 channel_id = gsi_channel_id(channel);
struct gsi *gsi = channel->gsi;
+ struct device *dev = gsi->dev;
u32 val;
val = u32_encode_bits(channel_id, CH_CHID_FMASK);
@@ -439,8 +441,7 @@ gsi_channel_command(struct gsi_channel *channel, enum gsi_ch_cmd_opcode opcode)
if (gsi_command(gsi, GSI_CH_CMD_OFFSET, val, completion))
return 0; /* Success! */
- dev_err(gsi->dev,
- "GSI command %u to channel %u timed out (state is %u)\n",
+ dev_err(dev, "GSI command %u for channel %u timed out, state %u\n",
opcode, channel_id, gsi_channel_state(channel));
return -ETIMEDOUT;
@@ -1154,8 +1155,8 @@ static irqreturn_t gsi_isr(int irq, void *dev_id)
break;
default:
dev_err(gsi->dev,
- "%s: unrecognized type 0x%08x\n",
- __func__, gsi_intr);
+ "unrecognized interrupt type 0x%08x\n",
+ gsi_intr);
break;
}
} while (intr_mask);
@@ -1259,7 +1260,7 @@ static int gsi_ring_alloc(struct gsi *gsi, struct gsi_ring *ring, u32 count)
if (ring->virt && addr % size) {
dma_free_coherent(dev, size, ring->virt, ring->addr);
dev_err(dev, "unable to alloc 0x%zx-aligned ring buffer\n",
- size);
+ size);
return -EINVAL; /* Not a good error value, but distinct */
} else if (!ring->virt) {
return -ENOMEM;
@@ -1650,12 +1651,13 @@ static void gsi_channel_teardown(struct gsi *gsi)
/* Setup function for GSI. GSI firmware must be loaded and initialized */
int gsi_setup(struct gsi *gsi, bool legacy)
{
+ struct device *dev = gsi->dev;
u32 val;
/* Here is where we first touch the GSI hardware */
val = ioread32(gsi->virt + GSI_GSI_STATUS_OFFSET);
if (!(val & ENABLED_FMASK)) {
- dev_err(gsi->dev, "GSI has not been enabled\n");
+ dev_err(dev, "GSI has not been enabled\n");
return -EIO;
}
@@ -1663,24 +1665,24 @@ int gsi_setup(struct gsi *gsi, bool legacy)
gsi->channel_count = u32_get_bits(val, NUM_CH_PER_EE_FMASK);
if (!gsi->channel_count) {
- dev_err(gsi->dev, "GSI reports zero channels supported\n");
+ dev_err(dev, "GSI reports zero channels supported\n");
return -EINVAL;
}
if (gsi->channel_count > GSI_CHANNEL_COUNT_MAX) {
- dev_warn(gsi->dev,
- "limiting to %u channels (hardware supports %u)\n",
+ dev_warn(dev,
+ "limiting to %u channels; hardware supports %u\n",
GSI_CHANNEL_COUNT_MAX, gsi->channel_count);
gsi->channel_count = GSI_CHANNEL_COUNT_MAX;
}
gsi->evt_ring_count = u32_get_bits(val, NUM_EV_PER_EE_FMASK);
if (!gsi->evt_ring_count) {
- dev_err(gsi->dev, "GSI reports zero event rings supported\n");
+ dev_err(dev, "GSI reports zero event rings supported\n");
return -EINVAL;
}
if (gsi->evt_ring_count > GSI_EVT_RING_COUNT_MAX) {
- dev_warn(gsi->dev,
- "limiting to %u event rings (hardware supports %u)\n",
+ dev_warn(dev,
+ "limiting to %u event rings; hardware supports %u\n",
GSI_EVT_RING_COUNT_MAX, gsi->evt_ring_count);
gsi->evt_ring_count = GSI_EVT_RING_COUNT_MAX;
}
@@ -1766,19 +1768,19 @@ static bool gsi_channel_data_valid(struct gsi *gsi,
/* Make sure channel ids are in the range driver supports */
if (channel_id >= GSI_CHANNEL_COUNT_MAX) {
- dev_err(dev, "bad channel id %u (must be less than %u)\n",
+ dev_err(dev, "bad channel id %u; must be less than %u\n",
channel_id, GSI_CHANNEL_COUNT_MAX);
return false;
}
if (data->ee_id != GSI_EE_AP && data->ee_id != GSI_EE_MODEM) {
- dev_err(dev, "bad EE id %u (AP or modem)\n", data->ee_id);
+ dev_err(dev, "bad EE id %u; not AP or modem\n", data->ee_id);
return false;
}
if (!data->channel.tlv_count ||
data->channel.tlv_count > GSI_TLV_MAX) {
- dev_err(dev, "channel %u bad tlv_count %u (must be 1..%u)\n",
+ dev_err(dev, "channel %u bad tlv_count %u; must be 1..%u\n",
channel_id, data->channel.tlv_count, GSI_TLV_MAX);
return false;
}
@@ -1796,13 +1798,13 @@ static bool gsi_channel_data_valid(struct gsi *gsi,
}
if (!is_power_of_2(data->channel.tre_count)) {
- dev_err(dev, "channel %u bad tre_count %u (not power of 2)\n",
+ dev_err(dev, "channel %u bad tre_count %u; not power of 2\n",
channel_id, data->channel.tre_count);
return false;
}
if (!is_power_of_2(data->channel.event_count)) {
- dev_err(dev, "channel %u bad event_count %u (not power of 2)\n",
+ dev_err(dev, "channel %u bad event_count %u; not power of 2\n",
channel_id, data->channel.event_count);
return false;
}
@@ -1956,6 +1958,7 @@ int gsi_init(struct gsi *gsi, struct platform_device *pdev, bool prefetch,
u32 count, const struct ipa_gsi_endpoint_data *data,
bool modem_alloc)
{
+ struct device *dev = &pdev->dev;
struct resource *res;
resource_size_t size;
unsigned int irq;
@@ -1963,7 +1966,7 @@ int gsi_init(struct gsi *gsi, struct platform_device *pdev, bool prefetch,
gsi_validate_build();
- gsi->dev = &pdev->dev;
+ gsi->dev = dev;
/* The GSI layer performs NAPI on all endpoints. NAPI requires a
* network device structure, but the GSI layer does not have one,
@@ -1974,43 +1977,41 @@ int gsi_init(struct gsi *gsi, struct platform_device *pdev, bool prefetch,
/* Get the GSI IRQ and request for it to wake the system */
ret = platform_get_irq_byname(pdev, "gsi");
if (ret <= 0) {
- dev_err(gsi->dev,
- "DT error %d getting \"gsi\" IRQ property\n", ret);
+ dev_err(dev, "DT error %d getting \"gsi\" IRQ property\n", ret);
return ret ? : -EINVAL;
}
irq = ret;
ret = request_irq(irq, gsi_isr, 0, "gsi", gsi);
if (ret) {
- dev_err(gsi->dev, "error %d requesting \"gsi\" IRQ\n", ret);
+ dev_err(dev, "error %d requesting \"gsi\" IRQ\n", ret);
return ret;
}
gsi->irq = irq;
ret = enable_irq_wake(gsi->irq);
if (ret)
- dev_warn(gsi->dev, "error %d enabling gsi wake irq\n", ret);
+ dev_warn(dev, "error %d enabling gsi wake irq\n", ret);
gsi->irq_wake_enabled = !ret;
/* Get GSI memory range and map it */
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "gsi");
if (!res) {
- dev_err(gsi->dev,
- "DT error getting \"gsi\" memory property\n");
+ dev_err(dev, "DT error getting \"gsi\" memory property\n");
ret = -ENODEV;
goto err_disable_irq_wake;
}
size = resource_size(res);
if (res->start > U32_MAX || size > U32_MAX - res->start) {
- dev_err(gsi->dev, "DT memory resource \"gsi\" out of range\n");
+ dev_err(dev, "DT memory resource \"gsi\" out of range\n");
ret = -EINVAL;
goto err_disable_irq_wake;
}
gsi->virt = ioremap(res->start, size);
if (!gsi->virt) {
- dev_err(gsi->dev, "unable to remap \"gsi\" memory\n");
+ dev_err(dev, "unable to remap \"gsi\" memory\n");
ret = -ENOMEM;
goto err_disable_irq_wake;
}
--
2.25.1
Powered by blists - more mailing lists