netdev - [PATCH net-next 1/2] net: dsa/b53: change b53_force_port

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <E1jqDRk-0004q2-V5@rmk-PC.armlinux.org.uk>
Date:   Tue, 30 Jun 2020 11:25:00 +0100
From:   Russell King <rmk+kernel@...linux.org.uk>
To:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>
Cc:     "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
        Vivien Didelot <vivien.didelot@...il.com>,
        Jakub Kicinski <kuba@...nel.org>
Subject: [PATCH net-next 1/2] net: dsa/b53: change b53_force_port_config()
 pause argument

Replace the b53_force_port_config() pause argument, which is based on
phylink's MLO_PAUSE_* definitions, to use a pair of booleans.  This
will allow us to move b53_force_port_config() from
b53_phylink_mac_config() to b53_phylink_mac_link_up().

Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
---
 drivers/net/dsa/b53/b53_common.c | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 1df05841ab6b..8a7fa6092b01 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1037,7 +1037,8 @@ static void b53_force_link(struct b53_device *dev, int port, int link)
 }
 
 static void b53_force_port_config(struct b53_device *dev, int port,
-				  int speed, int duplex, int pause)
+				  int speed, int duplex,
+				  bool tx_pause, bool rx_pause)
 {
 	u8 reg, val, off;
 
@@ -1075,9 +1076,9 @@ static void b53_force_port_config(struct b53_device *dev, int port,
 		return;
 	}
 
-	if (pause & MLO_PAUSE_RX)
+	if (rx_pause)
 		reg |= PORT_OVERRIDE_RX_FLOW;
-	if (pause & MLO_PAUSE_TX)
+	if (tx_pause)
 		reg |= PORT_OVERRIDE_TX_FLOW;
 
 	b53_write8(dev, B53_CTRL_PAGE, off, reg);
@@ -1089,22 +1090,24 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
 	struct b53_device *dev = ds->priv;
 	struct ethtool_eee *p = &dev->ports[port].eee;
 	u8 rgmii_ctrl = 0, reg = 0, off;
-	int pause = 0;
+	bool tx_pause = false;
+	bool rx_pause = false;
 
 	if (!phy_is_pseudo_fixed_link(phydev))
 		return;
 
 	/* Enable flow control on BCM5301x's CPU port */
 	if (is5301x(dev) && port == dev->cpu_port)
-		pause = MLO_PAUSE_TXRX_MASK;
+		tx_pause = rx_pause = true;
 
 	if (phydev->pause) {
 		if (phydev->asym_pause)
-			pause |= MLO_PAUSE_TX;
-		pause |= MLO_PAUSE_RX;
+			tx_pause = true;
+		rx_pause = true;
 	}
 
-	b53_force_port_config(dev, port, phydev->speed, phydev->duplex, pause);
+	b53_force_port_config(dev, port, phydev->speed, phydev->duplex,
+			      tx_pause, rx_pause);
 	b53_force_link(dev, port, phydev->link);
 
 	if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
@@ -1166,7 +1169,7 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
 	} else if (is5301x(dev)) {
 		if (port != dev->cpu_port) {
 			b53_force_port_config(dev, dev->cpu_port, 2000,
-					      DUPLEX_FULL, MLO_PAUSE_TXRX_MASK);
+					      DUPLEX_FULL, true, true);
 			b53_force_link(dev, dev->cpu_port, 1);
 		}
 	}
@@ -1256,7 +1259,9 @@ void b53_phylink_mac_config(struct dsa_switch *ds, int port,
 
 	if (mode == MLO_AN_FIXED) {
 		b53_force_port_config(dev, port, state->speed,
-				      state->duplex, state->pause);
+				      state->duplex,
+				      !!(state->pause & MLO_PAUSE_TX),
+				      !!(state->pause & MLO_PAUSE_RX));
 		return;
 	}
 
-- 
2.20.1