netdev - [PATCH net-next 3/3] net: dsa/bcm_sf2: move pause mode setting into mac_link

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 30 Jun 2020 11:28:18 +0100
From:   Russell King <rmk+kernel@...linux.org.uk>
To:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>
Cc:     "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
        Vivien Didelot <vivien.didelot@...il.com>,
        Jakub Kicinski <kuba@...nel.org>
Subject: [PATCH net-next 3/3] net: dsa/bcm_sf2: move pause mode setting into
 mac_link_up()

bcm_sf2 only appears to support pause modes on RGMII interfaces (the
enable bits are in the RGMII control register.)  Setup the pause modes
for RGMII connections.

Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
Tested-by: Florian Fainelli <f.fainelli@...il.com>
Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
---
 drivers/net/dsa/bcm_sf2.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 062e6efad53f..45e4d40d7e25 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -587,18 +587,11 @@ static void bcm_sf2_sw_mac_config(struct dsa_switch *ds, int port,
 	reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
 	reg &= ~ID_MODE_DIS;
 	reg &= ~(PORT_MODE_MASK << PORT_MODE_SHIFT);
-	reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
 
 	reg |= port_mode;
 	if (id_mode_dis)
 		reg |= ID_MODE_DIS;
 
-	if (state->pause & MLO_PAUSE_TXRX_MASK) {
-		if (state->pause & MLO_PAUSE_TX)
-			reg |= TX_PAUSE_EN;
-		reg |= RX_PAUSE_EN;
-	}
-
 	reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
 }
 
@@ -662,6 +655,22 @@ static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
 		else
 			offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
 
+		if (interface == PHY_INTERFACE_MODE_RGMII ||
+		    interface == PHY_INTERFACE_MODE_RGMII_TXID ||
+		    interface == PHY_INTERFACE_MODE_MII ||
+		    interface == PHY_INTERFACE_MODE_REVMII) {
+			reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
+			reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
+
+			if (tx_pause)
+				reg |= TX_PAUSE_EN;
+			if (rx_pause)
+				reg |= RX_PAUSE_EN;
+
+			reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
+		}
+
+
 		reg = SW_OVERRIDE | LINK_STS;
 		switch (speed) {
 		case SPEED_1000:
-- 
2.20.1