| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1593778190-1818-4-git-send-email-skalluru@marvell.com>
Date: Fri, 3 Jul 2020 17:39:49 +0530
From: Sudarsana Reddy Kalluru <skalluru@...vell.com>
To: <davem@...emloft.net>
CC: <netdev@...r.kernel.org>, <aelior@...vell.com>,
<irusskikh@...vell.com>, <mkalderon@...vell.com>
Subject: [PATCH net-next v2 3/4] bnx2x: Add support for idlechk tests.
The patch adds driver implementation for performing the idlechk tests.
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@...vell.com>
Signed-off-by: Igor Russkikh <irusskikh@...vell.com>
Reported-by: kernel test robot <lkp@...el.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 10 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 7 +
.../net/ethernet/broadcom/bnx2x/bnx2x_self_test.c | 268 ++++++++++++++++++++-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c | 2 +
4 files changed, 277 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 4f5b2b8..dee61d9 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1979,6 +1979,9 @@ struct bnx2x_func_init_params {
#define skip_queue(bp, idx) (NO_FCOE(bp) && IS_FCOE_IDX(idx))
+/*self test*/
+int bnx2x_idle_chk(struct bnx2x *bp);
+
/**
* bnx2x_set_mac_one - configure a single MAC address
*
@@ -2430,13 +2433,6 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id,
#define HC_SEG_ACCESS_ATTN 4
#define HC_SEG_ACCESS_NORM 0 /*Driver decision 0-1*/
-static const u32 dmae_reg_go_c[] = {
- DMAE_REG_GO_C0, DMAE_REG_GO_C1, DMAE_REG_GO_C2, DMAE_REG_GO_C3,
- DMAE_REG_GO_C4, DMAE_REG_GO_C5, DMAE_REG_GO_C6, DMAE_REG_GO_C7,
- DMAE_REG_GO_C8, DMAE_REG_GO_C9, DMAE_REG_GO_C10, DMAE_REG_GO_C11,
- DMAE_REG_GO_C12, DMAE_REG_GO_C13, DMAE_REG_GO_C14, DMAE_REG_GO_C15
-};
-
void bnx2x_set_ethtool_ops(struct bnx2x *bp, struct net_device *netdev);
void bnx2x_notify_link_changed(struct bnx2x *bp);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index db5107e7..06dfb90 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -276,6 +276,13 @@ enum bnx2x_board_type {
MODULE_DEVICE_TABLE(pci, bnx2x_pci_tbl);
+const u32 dmae_reg_go_c[] = {
+ DMAE_REG_GO_C0, DMAE_REG_GO_C1, DMAE_REG_GO_C2, DMAE_REG_GO_C3,
+ DMAE_REG_GO_C4, DMAE_REG_GO_C5, DMAE_REG_GO_C6, DMAE_REG_GO_C7,
+ DMAE_REG_GO_C8, DMAE_REG_GO_C9, DMAE_REG_GO_C10, DMAE_REG_GO_C11,
+ DMAE_REG_GO_C12, DMAE_REG_GO_C13, DMAE_REG_GO_C14, DMAE_REG_GO_C15
+};
+
/* Global resources for unloading a previously loaded device */
#define BNX2X_PREV_WAIT_NEEDED 1
static DEFINE_SEMAPHORE(bnx2x_prev_sem);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_self_test.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_self_test.c
index 93a7f7e..32a2295 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_self_test.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_self_test.c
@@ -18,7 +18,11 @@
#define MAX_FAIL_MSG 256
/* statistics and error reporting */
-static int idle_chk_errors;
+static int idle_chk_errors, idle_chk_warnings;
+
+/* masks for all chip types */
+static int is_e1, is_e1h, is_e2, is_e3a0, is_e3b0;
+
/* struct for the argument list for a predicate in the self test databasei */
struct st_pred_args {
@@ -30,7 +34,7 @@ struct st_pred_args {
u32 imm4; /* 4th value in predicate condition, left-to-right */
};
-/*struct representing self test record - a single test*/
+/* struct representing self test record - a single test */
struct st_record {
u8 chip_mask;
u8 macro;
@@ -111,7 +115,7 @@ static int peq_neq_neq_r2(struct st_pred_args *args)
/* struct holding the database of self test checks (registers and predicates) */
/* lines start from 2 since line 1 is heading in csv */
#define ST_DB_LINES 468
-struct st_record st_database[ST_DB_LINES] = {
+static struct st_record st_database[ST_DB_LINES] = {
/*line 2*/{(0x3), 1, 0x2114,
NA, 1, 0, pand_neq,
NA, IDLE_CHK_ERROR,
@@ -2920,3 +2924,261 @@ struct st_record st_database[ST_DB_LINES] = {
"NIG: PBF IF5 FIFO is not empty",
{NA, NA, 1, NA, NA, NA} },
};
+
+/* handle self test fails according to severity and type */
+static void bnx2x_self_test_log(struct bnx2x *bp, u8 severity, char *message)
+{
+ switch (severity) {
+ case IDLE_CHK_ERROR:
+ BNX2X_ERR("ERROR %s", message);
+ idle_chk_errors++;
+ break;
+ case IDLE_CHK_ERROR_NO_TRAFFIC:
+ DP(NETIF_MSG_HW, "INFO %s", message);
+ break;
+ case IDLE_CHK_WARNING:
+ DP(NETIF_MSG_HW, "WARNING %s", message);
+ idle_chk_warnings++;
+ break;
+ }
+}
+
+/* specific test for QM rd/wr pointers and rd/wr banks */
+static void bnx2x_idle_chk6(struct bnx2x *bp,
+ struct st_record *rec, char *message)
+{
+ u32 rd_ptr, wr_ptr, rd_bank, wr_bank;
+ int i;
+
+ for (i = 0; i < rec->loop; i++) {
+ /* read regs */
+ rec->pred_args.val1 =
+ REG_RD(bp, rec->reg1 + i * rec->incr);
+ rec->pred_args.val2 =
+ REG_RD(bp, rec->reg1 + i * rec->incr + 4);
+
+ /* calc read and write pointers */
+ rd_ptr = ((rec->pred_args.val1 & 0x3FFFFFC0) >> 6);
+ wr_ptr = ((((rec->pred_args.val1 & 0xC0000000) >> 30) & 0x3) |
+ ((rec->pred_args.val2 & 0x3FFFFF) << 2));
+
+ /* perfrom pointer test */
+ if (rd_ptr != wr_ptr) {
+ snprintf(message, MAX_FAIL_MSG,
+ "QM: PTRTBL entry %d- rd_ptr is not equal to wr_ptr. Values are 0x%x and 0x%x\n",
+ i, rd_ptr, wr_ptr);
+ bnx2x_self_test_log(bp, rec->severity, message);
+ }
+
+ /* calculate read and write banks */
+ rd_bank = ((rec->pred_args.val1 & 0x30) >> 4);
+ wr_bank = (rec->pred_args.val1 & 0x03);
+
+ /* perform bank test */
+ if (rd_bank != wr_bank) {
+ snprintf(message, MAX_FAIL_MSG,
+ "QM: PTRTBL entry %d - rd_bank is not equal to wr_bank. Values are 0x%x 0x%x\n",
+ i, rd_bank, wr_bank);
+ bnx2x_self_test_log(bp, rec->severity, message);
+ }
+ }
+}
+
+/* specific test for cfc info ram and cid cam */
+static void bnx2x_idle_chk7(struct bnx2x *bp,
+ struct st_record *rec, char *message)
+{
+ int i;
+
+ /* iterate through lcids */
+ for (i = 0; i < rec->loop; i++) {
+ /* make sure cam entry is valid (bit 0) */
+ if ((REG_RD(bp, (rec->reg2 + i * 4)) & 0x1) != 0x1)
+ continue;
+
+ /* get connection type (multiple reads due to widebus) */
+ REG_RD(bp, (rec->reg1 + i * rec->incr));
+ REG_RD(bp, (rec->reg1 + i * rec->incr + 4));
+ rec->pred_args.val1 =
+ REG_RD(bp, (rec->reg1 + i * rec->incr + 8));
+ REG_RD(bp, (rec->reg1 + i * rec->incr + 12));
+
+ /* obtain connection type */
+ if (is_e1 || is_e1h) {
+ /* E1 E1H (bits 4..7) */
+ rec->pred_args.val1 &= 0x78;
+ rec->pred_args.val1 >>= 3;
+ } else {
+ /* E2 E3A0 E3B0 (bits 26..29) */
+ rec->pred_args.val1 &= 0x1E000000;
+ rec->pred_args.val1 >>= 25;
+ }
+
+ /* get activity counter value */
+ rec->pred_args.val2 = REG_RD(bp, rec->reg3 + i * 4);
+
+ /* validate ac value is legal for con_type at idle state */
+ if (rec->bnx2x_predicate(&rec->pred_args)) {
+ snprintf(message, MAX_FAIL_MSG,
+ "%s. Values are 0x%x 0x%x\n", rec->fail_msg,
+ rec->pred_args.val1, rec->pred_args.val2);
+ bnx2x_self_test_log(bp, rec->severity, message);
+ }
+ }
+}
+
+/* self test procedure
+ * scan auto-generated database
+ * for each line:
+ * 1. compare chip mask
+ * 2. determine type (according to maro number)
+ * 3. read registers
+ * 4. call predicate
+ * 5. collate results and statistics
+ */
+int bnx2x_idle_chk(struct bnx2x *bp)
+{
+ u16 i; /* loop counter */
+ u16 st_ind; /* self test database access index */
+ struct st_record rec; /* current record variable */
+ char message[MAX_FAIL_MSG]; /* message to log */
+
+ /*init stats*/
+ idle_chk_errors = 0;
+ idle_chk_warnings = 0;
+
+ /*create masks for all chip types*/
+ is_e1 = CHIP_IS_E1(bp);
+ is_e1h = CHIP_IS_E1H(bp);
+ is_e2 = CHIP_IS_E2(bp);
+ is_e3a0 = CHIP_IS_E3A0(bp);
+ is_e3b0 = CHIP_IS_E3B0(bp);
+
+ /*database main loop*/
+ for (st_ind = 0; st_ind < ST_DB_LINES; st_ind++) {
+ rec = st_database[st_ind];
+
+ /*check if test applies to chip*/
+ if (!((rec.chip_mask & IDLE_CHK_E1) && is_e1) &&
+ !((rec.chip_mask & IDLE_CHK_E1H) && is_e1h) &&
+ !((rec.chip_mask & IDLE_CHK_E2) && is_e2) &&
+ !((rec.chip_mask & IDLE_CHK_E3A0) && is_e3a0) &&
+ !((rec.chip_mask & IDLE_CHK_E3B0) && is_e3b0))
+ continue;
+
+ /* identify macro */
+ switch (rec.macro) {
+ case 1:
+ /* read single reg and call predicate */
+ rec.pred_args.val1 = REG_RD(bp, rec.reg1);
+ DP(BNX2X_MSG_IDLE, "mac1 add %x\n", rec.reg1);
+ if (rec.bnx2x_predicate(&rec.pred_args)) {
+ snprintf(message, sizeof(message),
+ "%s.Value is 0x%x\n", rec.fail_msg,
+ rec.pred_args.val1);
+ bnx2x_self_test_log(bp, rec.severity, message);
+ }
+ break;
+ case 2:
+ /* read repeatedly starting from reg1 and call
+ * predicate after each read
+ */
+ for (i = 0; i < rec.loop; i++) {
+ rec.pred_args.val1 =
+ REG_RD(bp, rec.reg1 + i * rec.incr);
+ DP(BNX2X_MSG_IDLE, "mac2 add %x\n", rec.reg1);
+ if (rec.bnx2x_predicate(&rec.pred_args)) {
+ snprintf(message, sizeof(message),
+ "%s. Value is 0x%x in loop %d\n",
+ rec.fail_msg,
+ rec.pred_args.val1, i);
+ bnx2x_self_test_log(bp, rec.severity,
+ message);
+ }
+ }
+ break;
+ case 3:
+ /* read two regs and call predicate */
+ rec.pred_args.val1 = REG_RD(bp, rec.reg1);
+ rec.pred_args.val2 = REG_RD(bp, rec.reg2);
+ DP(BNX2X_MSG_IDLE, "mac3 add1 %x add2 %x\n",
+ rec.reg1, rec.reg2);
+ if (rec.bnx2x_predicate(&rec.pred_args)) {
+ snprintf(message, sizeof(message),
+ "%s. Values are 0x%x 0x%x\n",
+ rec.fail_msg, rec.pred_args.val1,
+ rec.pred_args.val2);
+ bnx2x_self_test_log(bp, rec.severity, message);
+ }
+ break;
+ case 4:
+ /*unused to-date*/
+ for (i = 0; i < rec.loop; i++) {
+ rec.pred_args.val1 =
+ REG_RD(bp, rec.reg1 + i * rec.incr);
+ rec.pred_args.val2 =
+ (REG_RD(bp,
+ rec.reg2 + i * rec.incr)) >> 1;
+ if (rec.bnx2x_predicate(&rec.pred_args)) {
+ snprintf(message, sizeof(message),
+ "%s. Values are 0x%x 0x%x in loop %d\n",
+ rec.fail_msg,
+ rec.pred_args.val1,
+ rec.pred_args.val2, i);
+ bnx2x_self_test_log(bp, rec.severity,
+ message);
+ }
+ }
+ break;
+ case 5:
+ /* compare two regs, pending
+ * the value of a condition reg
+ */
+ rec.pred_args.val1 = REG_RD(bp, rec.reg1);
+ rec.pred_args.val2 = REG_RD(bp, rec.reg2);
+ DP(BNX2X_MSG_IDLE, "mac3 add1 %x add2 %x add3 %x\n",
+ rec.reg1, rec.reg2, rec.reg3);
+ if (REG_RD(bp, rec.reg3) != 0) {
+ if (rec.bnx2x_predicate(&rec.pred_args)) {
+ snprintf(message, sizeof(message),
+ "%s. Values are 0x%x 0x%x\n",
+ rec.fail_msg,
+ rec.pred_args.val1,
+ rec.pred_args.val2);
+ bnx2x_self_test_log(bp, rec.severity,
+ message);
+ }
+ }
+ break;
+ case 6:
+ /* compare read and write pointers
+ * and read and write banks in QM
+ */
+ bnx2x_idle_chk6(bp, &rec, message);
+ break;
+ case 7:
+ /* compare cfc info cam with cid cam */
+ bnx2x_idle_chk7(bp, &rec, message);
+ break;
+ default:
+ DP(BNX2X_MSG_IDLE,
+ "unknown macro in self test data base. macro %d line %d",
+ rec.macro, st_ind);
+ }
+ }
+
+ /* abort if interface is not running */
+ if (!netif_running(bp->dev))
+ return idle_chk_errors;
+
+ /* return value accorindg to statistics */
+ if (idle_chk_errors == 0) {
+ DP(BNX2X_MSG_IDLE,
+ "completed successfully (logged %d warnings)\n",
+ idle_chk_warnings);
+ } else {
+ BNX2X_ERR("failed (with %d errors, %d warnings)\n",
+ idle_chk_errors, idle_chk_warnings);
+ }
+ return idle_chk_errors;
+}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c
index 7e0919a..0b193ed 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c
@@ -23,6 +23,8 @@
#include "bnx2x_cmn.h"
#include "bnx2x_sriov.h"
+extern const u32 dmae_reg_go_c[];
+
/* Statistics */
/*
--
1.8.3.1
Powered by blists - more mailing lists