[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200706143529.18306-7-geert+renesas@glider.be>
Date: Mon, 6 Jul 2020 16:35:28 +0200
From: Geert Uytterhoeven <geert+renesas@...der.be>
To: Sergei Shtylyov <sergei.shtylyov@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Rob Herring <robh+dt@...nel.org>
Cc: Andrew Lunn <andrew@...n.ch>,
Oleksij Rempel <linux@...pel-privat.de>,
Philippe Schenker <philippe.schenker@...adex.com>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Dan Murphy <dmurphy@...com>,
Kazuya Mizuguchi <kazuya.mizuguchi.ks@...esas.com>,
Wolfram Sang <wsa+renesas@...g-engineering.com>,
Magnus Damm <magnus.damm@...il.com>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
Geert Uytterhoeven <geert+renesas@...der.be>
Subject: [PATCH v2 6/7] arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling
Some EtherAVB variants support internal clock delay configuration, which
can add larger delays than the delays that are typically supported by
the PHY (using an "rgmii-*id" PHY mode, and/or "[rt]xc-skew-ps"
properties).
Historically, the EtherAVB driver configured these delays based on the
"rgmii-*id" PHY mode. This was wrong, as these are meant solely for the
PHY, not for the MAC. Hence properties were introduced for explicit
configuration of these delays.
Convert the RZ/G2 DTS files from the old to the new scheme:
- Add default "rx-internal-delay-ps" and "tx-internal-delay-ps"
properties to the SoC .dtsi files, to be overridden by board files
where needed,
- Convert board files from "rgmii-*id" PHY modes to "rgmii", adding
the appropriate "rx-internal-delay-ps" and/or "tx-internal-delay-ps"
overrides.
Notes:
- RZ/G2E does not support TX internal delay handling.
Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
---
v2:
- Replace "renesas,[rt]xc-delay-ps" by "[rt]x-internal-delay-ps".
---
arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi | 2 +-
arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 2 ++
arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 2 ++
arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 1 +
4 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
index 28fe17e3bc4e9c44..26df5f171ca785bf 100644
--- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
@@ -27,7 +27,7 @@
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
phy-handle = <&phy0>;
- phy-mode = "rgmii-txid";
+ tx-internal-delay-ps = <2000>;
status = "okay";
phy0: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index a603d947970ece68..3bf5bd9811ecbe0f 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -1113,6 +1113,8 @@
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
+ tx-internal-delay-ps = <0>;
iommus = <&ipmmu_ds0 16>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index 1e51855c7cd383a6..725b7c3e44d2152c 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -987,6 +987,8 @@
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
+ tx-internal-delay-ps = <0>;
iommus = <&ipmmu_ds0 16>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 5c72a7efbb035d02..886a58abe7fdee60 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -960,6 +960,7 @@
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
iommus = <&ipmmu_ds0 16>;
#address-cells = <1>;
#size-cells = <0>;
--
2.17.1
Powered by blists - more mailing lists