netdev - Re: [PATCH] ath10k: Keep track of which interrupts fired, don't poll them

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:   Thu, 9 Jul 2020 08:22:28 -0700
From:   Doug Anderson <dianders@...omium.org>
To:     Brian Norris <briannorris@...omium.org>
Cc:     Kalle Valo <kvalo@...eaurora.org>,
        ath10k <ath10k@...ts.infradead.org>,
        Sai Prakash Ranjan <saiprakash.ranjan@...eaurora.org>,
        linux-arm-msm <linux-arm-msm@...r.kernel.org>,
        linux-wireless <linux-wireless@...r.kernel.org>,
        Rakesh Pillai <pillair@...eaurora.org>,
        Abhishek Kumar <kuabhs@...gle.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Linux Kernel <linux-kernel@...r.kernel.org>,
        "<netdev@...r.kernel.org>" <netdev@...r.kernel.org>
Subject: Re: [PATCH] ath10k: Keep track of which interrupts fired, don't poll them

Hi,

On Wed, Jul 8, 2020 at 4:40 PM Brian Norris <briannorris@...omium.org> wrote:
>
> On Wed, Jul 8, 2020 at 4:14 PM Doug Anderson <dianders@...omium.org> wrote:
> > On Wed, Jul 8, 2020 at 4:03 PM Brian Norris <briannorris@...omium.org> wrote:
> > > If I'm reading correctly, you're removing the only remaining use of
> > > 'per_ce_irq'. Should we kill the field entirely?
> >
> > Ah, you are indeed correct!  I hadn't noticed that.  Unless I hear
> > otherwise, I'll send a v2 tomorrow that removes the field entirely.
>
> A healthy middle ground might put that in a patch 2, so it's easily
> dropped if desired. *shrug*

Sure, sounds like a plan.


> > > Or perhaps we should
> > > leave some kind of WARN_ON() (BUG_ON()?) if this function is called
> > > erroneously with per_ce_irq==true? But I suppose this driver is full
> > > of landmines if the CE API is used incorrectly.
> >
> > Yeah, I originally had a WARN_ON() here and then took it out because
> > it seemed like extra overhead and, as you said, someone writing the
> > code has to know how the API works already I think.  ...but I'll add
> > it back in if people want.
>
> I believe WARN_ON() and friends have a built-in unlikely(), so it
> shouldn't have much overhead. But I don't really mind either way.

Since you don't feel strongly, leaving it off.


> > > Do you need to clear this map if the interface goes down or if there's
> > > a firmware crash? Right now, I don't think there's a guarantee that
> > > we'll run through a NAPI poll in those cases, which is the only place
> > > you clear the map, and if the hardware/firmware has been reset, the
> > > state map is probably not valid.
> >
> > Seems like a good idea.  Is the right place at the start of
> > ath10k_snoc_hif_start()?
>
> Either there or in .power_down()/.power_up(). I think either would be
> equally correct, but I'm not entirely sure if the semantic difference
> is meaningful for this.

Will choose ath10k_snoc_hif_start() since it's where napi_enable() is
and ath10k_snoc_irq_enable() are and those are related.


-Doug