[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200716223236.GA1314837@lunn.ch>
Date: Fri, 17 Jul 2020 00:32:36 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Jakub Kicinski <kuba@...nel.org>
Cc: Matthew Hagan <mnhagan88@...il.com>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
"David S. Miller" <davem@...emloft.net>, linux@...linux.org.uk,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
John Crispin <john@...ozen.org>,
Jonathan McDowell <noodles@...th.li>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org
Subject: Re: [PATCH 2/2] dt-bindings: net: dsa: qca8k: Add PORT0_PAD_CTRL
properties
On Thu, Jul 16, 2020 at 03:09:25PM -0700, Jakub Kicinski wrote:
> On Mon, 13 Jul 2020 21:50:26 +0100 Matthew Hagan wrote:
> > Add names and decriptions of additional PORT0_PAD_CTRL properties.
> >
> > Signed-off-by: Matthew Hagan <mnhagan88@...il.com>
> > ---
> > Documentation/devicetree/bindings/net/dsa/qca8k.txt | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
> > index ccbc6d89325d..3d34c4f2e891 100644
> > --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
> > +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
> > @@ -13,6 +13,14 @@ Optional properties:
> >
> > - reset-gpios: GPIO to be used to reset the whole device
> >
> > +Optional MAC configuration properties:
> > +
> > +- qca,exchange-mac0-mac6: If present, internally swaps MAC0 and MAC6.
>
> Perhaps we can say a little more here?
>
> > +- qca,sgmii-rxclk-falling-edge: If present, sets receive clock phase to
> > + falling edge.
> > +- qca,sgmii-txclk-falling-edge: If present, sets transmit clock phase to
> > + falling edge.
>
> These are not something that other vendors may implement and therefore
> something we may want to make generic? Andrew?
I've never seen any other vendor implement this. Which to me makes me
think this is a vendor extension, to Ciscos vendor extension of
1000BaseX.
Matthew, do you have a real use cases of these? I don't see a DT patch
making use of them. And if you do, what is the PHY on the other end
which also allows you to invert the clocks?
Andrew
Powered by blists - more mailing lists