[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200717152205.826-1-m-karicheri2@ti.com>
Date: Fri, 17 Jul 2020 11:22:04 -0400
From: Murali Karicheri <m-karicheri2@...com>
To: <davem@...emloft.net>, <kuba@...nel.org>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-api@...r.kernel.org>,
<nsekhar@...com>, <grygorii.strashko@...com>,
<vinicius.gomes@...el.com>
Subject: [net-next iproute2 PATCH v3 1/2] iplink: hsr: add support for creating PRP device similar to HSR
This patch enhances the iplink command to add a proto parameters to
create PRP device/interface similar to HSR. Both protocols are
quite similar and requires a pair of Ethernet interfaces. So re-use
the existing HSR iplink command to create PRP device/interface as
well. Use proto parameter to differentiate the two protocols.
Signed-off-by: Murali Karicheri <m-karicheri2@...com>
---
dependent on the series "[net-next PATCH v3 0/7] Add PRP driver"
include/uapi/linux/if_link.h | 12 +++++++++++-
ip/iplink_hsr.c | 19 +++++++++++++++++--
2 files changed, 28 insertions(+), 3 deletions(-)
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index a8901a39a345..fa2e3f642deb 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -904,7 +904,14 @@ enum {
#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1)
-/* HSR section */
+/* HSR/PRP section, both uses same interface */
+
+/* Different redundancy protocols for hsr device */
+enum {
+ HSR_PROTOCOL_HSR,
+ HSR_PROTOCOL_PRP,
+ HSR_PROTOCOL_MAX,
+};
enum {
IFLA_HSR_UNSPEC,
@@ -914,6 +921,9 @@ enum {
IFLA_HSR_SUPERVISION_ADDR, /* Supervision frame multicast addr */
IFLA_HSR_SEQ_NR,
IFLA_HSR_VERSION, /* HSR version */
+ IFLA_HSR_PROTOCOL, /* Indicate different protocol than
+ * HSR. For example PRP.
+ */
__IFLA_HSR_MAX,
};
diff --git a/ip/iplink_hsr.c b/ip/iplink_hsr.c
index 7d9167d4e6a3..6ea138a23cbc 100644
--- a/ip/iplink_hsr.c
+++ b/ip/iplink_hsr.c
@@ -25,7 +25,7 @@ static void print_usage(FILE *f)
{
fprintf(f,
"Usage:\tip link add name NAME type hsr slave1 SLAVE1-IF slave2 SLAVE2-IF\n"
- "\t[ supervision ADDR-BYTE ] [version VERSION]\n"
+ "\t[ supervision ADDR-BYTE ] [version VERSION] [proto PROTOCOL]\n"
"\n"
"NAME\n"
" name of new hsr device (e.g. hsr0)\n"
@@ -35,7 +35,9 @@ static void print_usage(FILE *f)
" 0-255; the last byte of the multicast address used for HSR supervision\n"
" frames (default = 0)\n"
"VERSION\n"
- " 0,1; the protocol version to be used. (default = 0)\n");
+ " 0,1; the protocol version to be used. (default = 0)\n"
+ "PROTOCOL\n"
+ " 0 - HSR, 1 - PRP. (default = 0 - HSR)\n");
}
static void usage(void)
@@ -49,6 +51,7 @@ static int hsr_parse_opt(struct link_util *lu, int argc, char **argv,
int ifindex;
unsigned char multicast_spec;
unsigned char protocol_version;
+ unsigned char protocol = HSR_PROTOCOL_HSR;
while (argc > 0) {
if (matches(*argv, "supervision") == 0) {
@@ -64,6 +67,13 @@ static int hsr_parse_opt(struct link_util *lu, int argc, char **argv,
invarg("version is invalid", *argv);
addattr_l(n, 1024, IFLA_HSR_VERSION,
&protocol_version, 1);
+ } else if (matches(*argv, "proto") == 0) {
+ NEXT_ARG();
+ if (!(get_u8(&protocol, *argv, 0) == HSR_PROTOCOL_HSR ||
+ get_u8(&protocol, *argv, 0) == HSR_PROTOCOL_PRP))
+ invarg("protocol is invalid", *argv);
+ addattr_l(n, 1024, IFLA_HSR_PROTOCOL,
+ &protocol, 1);
} else if (matches(*argv, "slave1") == 0) {
NEXT_ARG();
ifindex = ll_name_to_index(*argv);
@@ -140,6 +150,11 @@ static void hsr_print_opt(struct link_util *lu, FILE *f, struct rtattr *tb[])
RTA_PAYLOAD(tb[IFLA_HSR_SUPERVISION_ADDR]),
ARPHRD_VOID,
b1, sizeof(b1)));
+ if (tb[IFLA_HSR_PROTOCOL])
+ print_int(PRINT_ANY,
+ "proto",
+ "proto %d ",
+ rta_getattr_u8(tb[IFLA_HSR_PROTOCOL]));
}
static void hsr_print_help(struct link_util *lu, int argc, char **argv,
--
2.17.1
Powered by blists - more mailing lists