| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200719220336.6919-5-michael@walle.cc>
Date: Mon, 20 Jul 2020 00:03:36 +0200
From: Michael Walle <michael@...le.cc>
To: netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: "David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>, Andrew Lunn <andrew@...n.ch>,
Michael Walle <michael@...le.cc>,
Vladimir Oltean <olteanv@...il.com>,
Alex Marginean <alexandru.marginean@....com>,
Claudiu Manoil <claudiu.manoil@....com>,
Heiko Thiery <heiko.thiery@...il.com>,
Russell King - ARM Linux admin <linux@...linux.org.uk>,
Ioana Ciornei <ioana.ciornei@....com>,
Microchip Linux Driver Support <UNGLinuxDriver@...rochip.com>,
Vladimir Oltean <vladimir.oltean@....com>
Subject: [PATCH net-next v7 4/4] net: enetc: Use DT protocol information to set up the ports
From: Alex Marginean <alexandru.marginean@....com>
Use DT information rather than in-band information from bootloader to
set up MAC for XGMII. For RGMII use the DT indication in addition to
RGMII defaults in hardware.
However, this implies that PHY connection information needs to be
extracted before netdevice creation, when the ENETC Port MAC is
being configured.
Signed-off-by: Alex Marginean <alexandru.marginean@....com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@....com>
Signed-off-by: Michael Walle <michael@...le.cc>
Tested-by: Vladimir Oltean <vladimir.oltean@....com>
---
.../net/ethernet/freescale/enetc/enetc_pf.c | 57 ++++++++++---------
.../net/ethernet/freescale/enetc/enetc_pf.h | 3 +
2 files changed, 34 insertions(+), 26 deletions(-)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
index 3bf345b84b76..5a08f66b123c 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
@@ -482,7 +482,8 @@ static void enetc_port_si_configure(struct enetc_si *si)
enetc_port_wr(hw, ENETC_PSIVLANFMR, ENETC_PSIVLANFMR_VS);
}
-static void enetc_configure_port_mac(struct enetc_hw *hw)
+static void enetc_configure_port_mac(struct enetc_hw *hw,
+ phy_interface_t phy_mode)
{
enetc_port_wr(hw, ENETC_PM0_MAXFRM,
ENETC_SET_MAXFRM(ENETC_RX_MAXFRM_SIZE));
@@ -498,9 +499,11 @@ static void enetc_configure_port_mac(struct enetc_hw *hw)
ENETC_PM0_CMD_TXP | ENETC_PM0_PROMISC |
ENETC_PM0_TX_EN | ENETC_PM0_RX_EN);
/* set auto-speed for RGMII */
- if (enetc_port_rd(hw, ENETC_PM0_IF_MODE) & ENETC_PMO_IFM_RG)
+ if (enetc_port_rd(hw, ENETC_PM0_IF_MODE) & ENETC_PMO_IFM_RG ||
+ phy_interface_mode_is_rgmii(phy_mode))
enetc_port_wr(hw, ENETC_PM0_IF_MODE, ENETC_PM0_IFM_RGAUTO);
- if (enetc_global_rd(hw, ENETC_G_EPFBLPR(1)) == ENETC_G_EPFBLPR1_XGMII)
+
+ if (phy_mode == PHY_INTERFACE_MODE_USXGMII)
enetc_port_wr(hw, ENETC_PM0_IF_MODE, ENETC_PM0_IFM_XGMII);
}
@@ -524,7 +527,7 @@ static void enetc_configure_port(struct enetc_pf *pf)
enetc_configure_port_pmac(hw);
- enetc_configure_port_mac(hw);
+ enetc_configure_port_mac(hw, pf->if_mode);
enetc_port_si_configure(pf->si);
@@ -776,27 +779,27 @@ static void enetc_mdio_remove(struct enetc_pf *pf)
mdiobus_unregister(pf->mdio);
}
-static int enetc_of_get_phy(struct enetc_ndev_priv *priv)
+static int enetc_of_get_phy(struct enetc_pf *pf)
{
- struct enetc_pf *pf = enetc_si_priv(priv->si);
- struct device_node *np = priv->dev->of_node;
+ struct device *dev = &pf->si->pdev->dev;
+ struct device_node *np = dev->of_node;
struct device_node *mdio_np;
int err;
- priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
- if (!priv->phy_node) {
+ pf->phy_node = of_parse_phandle(np, "phy-handle", 0);
+ if (!pf->phy_node) {
if (!of_phy_is_fixed_link(np)) {
- dev_err(priv->dev, "PHY not specified\n");
+ dev_err(dev, "PHY not specified\n");
return -ENODEV;
}
err = of_phy_register_fixed_link(np);
if (err < 0) {
- dev_err(priv->dev, "fixed link registration failed\n");
+ dev_err(dev, "fixed link registration failed\n");
return err;
}
- priv->phy_node = of_node_get(np);
+ pf->phy_node = of_node_get(np);
}
mdio_np = of_get_child_by_name(np, "mdio");
@@ -804,15 +807,15 @@ static int enetc_of_get_phy(struct enetc_ndev_priv *priv)
of_node_put(mdio_np);
err = enetc_mdio_probe(pf);
if (err) {
- of_node_put(priv->phy_node);
+ of_node_put(pf->phy_node);
return err;
}
}
- err = of_get_phy_mode(np, &priv->if_mode);
+ err = of_get_phy_mode(np, &pf->if_mode);
if (err) {
- dev_err(priv->dev, "missing phy type\n");
- of_node_put(priv->phy_node);
+ dev_err(dev, "missing phy type\n");
+ of_node_put(pf->phy_node);
if (of_phy_is_fixed_link(np))
of_phy_deregister_fixed_link(np);
else
@@ -824,14 +827,14 @@ static int enetc_of_get_phy(struct enetc_ndev_priv *priv)
return 0;
}
-static void enetc_of_put_phy(struct enetc_ndev_priv *priv)
+static void enetc_of_put_phy(struct enetc_pf *pf)
{
- struct device_node *np = priv->dev->of_node;
+ struct device_node *np = pf->si->pdev->dev.of_node;
if (np && of_phy_is_fixed_link(np))
of_phy_deregister_fixed_link(np);
- if (priv->phy_node)
- of_node_put(priv->phy_node);
+ if (pf->phy_node)
+ of_node_put(pf->phy_node);
}
static int enetc_imdio_init(struct enetc_pf *pf, bool is_c45)
@@ -994,6 +997,10 @@ static int enetc_pf_probe(struct pci_dev *pdev,
pf->si = si;
pf->total_vfs = pci_sriov_get_totalvfs(pdev);
+ err = enetc_of_get_phy(pf);
+ if (err)
+ dev_warn(&pdev->dev, "Fallback to PHY-less operation\n");
+
enetc_configure_port(pf);
enetc_get_si_caps(si);
@@ -1008,6 +1015,8 @@ static int enetc_pf_probe(struct pci_dev *pdev,
enetc_pf_netdev_setup(si, ndev, &enetc_ndev_ops);
priv = netdev_priv(ndev);
+ priv->phy_node = pf->phy_node;
+ priv->if_mode = pf->if_mode;
enetc_init_si_rings_params(priv);
@@ -1023,10 +1032,6 @@ static int enetc_pf_probe(struct pci_dev *pdev,
goto err_alloc_msix;
}
- err = enetc_of_get_phy(priv);
- if (err)
- dev_warn(&pdev->dev, "Fallback to PHY-less operation\n");
-
err = enetc_configure_serdes(priv);
if (err)
dev_warn(&pdev->dev, "Attempted SerDes config but failed\n");
@@ -1040,7 +1045,6 @@ static int enetc_pf_probe(struct pci_dev *pdev,
return 0;
err_reg_netdev:
- enetc_of_put_phy(priv);
enetc_free_msix(priv);
err_alloc_msix:
enetc_free_si_resources(priv);
@@ -1048,6 +1052,7 @@ static int enetc_pf_probe(struct pci_dev *pdev,
si->ndev = NULL;
free_netdev(ndev);
err_alloc_netdev:
+ enetc_of_put_phy(pf);
err_map_pf_space:
enetc_pci_remove(pdev);
@@ -1068,7 +1073,7 @@ static void enetc_pf_remove(struct pci_dev *pdev)
enetc_imdio_remove(pf);
enetc_mdio_remove(pf);
- enetc_of_put_phy(priv);
+ enetc_of_put_phy(pf);
enetc_free_msix(priv);
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.h b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
index 2cb922b59f46..0d0ee91282a5 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
@@ -46,6 +46,9 @@ struct enetc_pf {
struct mii_bus *mdio; /* saved for cleanup */
struct mii_bus *imdio;
struct phy_device *pcs;
+
+ struct device_node *phy_node;
+ phy_interface_t if_mode;
};
int enetc_msg_psi_init(struct enetc_pf *pf);
--
2.20.1
Powered by blists - more mailing lists