lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 20 Jul 2020 21:57:01 -0700
From:   Florian Fainelli <>
Subject: Re: [PATCH 1/2] net: dsa: Add flag for 802.1AD when adding VLAN for
 dsa switch and port

On 7/20/2020 3:41 AM, wrote:
> From: "" <>
> the following command can be supported:
> ip link add link swp1 name swp1.100 type vlan protocol 802.1ad id 100

You should probably include the switch driver that is going to be
benefiting from doing these changes in the patch series, provide a cover
letter when sending more than one patch, and also combine both the add
and delete parts.

Since you already have visibility into proto, it may not be necessary at
all for now to define a BRIDGE_VLAN_INFO_8021AD bit in order to pass
that flag down to DSA for programming the VLAN, just pass proto to
dsa_port_vid_add() or a boolean flag which indicates whether this is the
customer or service tag that you are trying to program?

Powered by blists - more mailing lists