[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1595318122-18490-1-git-send-email-claudiu.manoil@nxp.com>
Date: Tue, 21 Jul 2020 10:55:16 +0300
From: Claudiu Manoil <claudiu.manoil@....com>
To: "David S . Miller" <davem@...emloft.net>
Cc: Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org
Subject: [PATCH net-next v3 0/6] Add adaptive interrupt coalescing
Apart from some related cleanup patches, this set
introduces in a straightforward way the support needed
to enable and configure interrupt coalescing for ENETC.
Patch 5 introduces the support needed for configuring the
interrupt coalescing parameters and for switching between
moderated (int. coalescing) and per-packet interrupt modes.
When interrupt coalescing is enabled the Rx/Tx time
thresholds are configurable, packet thresholds are fixed.
To make this work reliably, patch 5 uses the traffic
pause procedure introduced in patch 2.
Patch 6 adds DIM (Dynamic Interrupt Moderation) to implement
adaptive coalescing based on time thresholds, for the Rx 'channel'.
On the Tx side a default optimal value is used instead, optimized for
TCP traffic over 1G and 2.5G links. This default 'optimal' value can
be overridden anytime via 'ethtool -C tx-usecs'.
netperf -t TCP_MAERTS measurements show a significant CPU load
reduction correlated w/ reduced interrupt rates. For the
measurement results refer to the comments in patch 6.
v2: Replaced Tx DIM with predefined optimal value, giving
better results. This was also suggested by Jakub (cc).
Switched order of patches 4 and 5, for better grouping.
v3: minor cleanup/improvements
Claudiu Manoil (6):
enetc: Refine buffer descriptor ring sizes
enetc: Factor out the traffic start/stop procedures
enetc: Fix interrupt coalescing register naming
enetc: Drop redundant ____cacheline_aligned_in_smp
enetc: Add interrupt coalescing support
enetc: Add adaptive interrupt coalescing
drivers/net/ethernet/freescale/enetc/Kconfig | 2 +
drivers/net/ethernet/freescale/enetc/enetc.c | 156 ++++++++++++++----
drivers/net/ethernet/freescale/enetc/enetc.h | 36 +++-
.../ethernet/freescale/enetc/enetc_ethtool.c | 84 +++++++++-
.../net/ethernet/freescale/enetc/enetc_hw.h | 23 ++-
5 files changed, 257 insertions(+), 44 deletions(-)
--
2.17.1
Powered by blists - more mailing lists