Message-ID: <CAACQVJqjE-N4M0hLuptdicpfgRxV6ZhdYm0+zxjnzP=tndHUpA@mail.gmail.com>
Date:   Tue, 21 Jul 2020 15:21:21 +0530
From:   Vasundhara Volam <vasundhara-v.volam@...adcom.com>
To:     Jiri Pirko <jiri@...nulli.us>
Cc:     David Miller <davem@...emloft.net>,
        Netdev <netdev@...r.kernel.org>,
        Michael Chan <michael.chan@...adcom.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Jiri Pirko <jiri@...lanox.com>,
        Michal Kubecek <mkubecek@...e.cz>,
        Moshe Shemesh <moshe@...lanox.com>
Subject: Re: [RFC v2 net-next] devlink: Add reset subcommand.

On Wed, Jul 1, 2020 at 3:17 PM Jiri Pirko <jiri@...nulli.us> wrote:
>
> Wed, Jul 01, 2020 at 11:25:50AM CEST, vasundhara-v.volam@...adcom.com wrote:
> >On Wed, Jul 1, 2020 at 11:21 AM Jiri Pirko <jiri@...nulli.us> wrote:
> >>
> >> Tue, Jun 30, 2020 at 05:15:18PM CEST, vasundhara-v.volam@...adcom.com wrote:
> >> >On Tue, Jun 30, 2020 at 6:23 PM Jiri Pirko <jiri@...nulli.us> wrote:
> >> >>
> >> >> Tue, Jun 30, 2020 at 01:34:06PM CEST, vasundhara-v.volam@...adcom.com wrote:
> >> >> >Advanced NICs support live reset of some of the hardware
> >> >> >components, that resets the device immediately with all the
> >> >> >host drivers loaded.
> >> >> >
> >> >> >Add devlink reset subcommand to support live and deferred modes
> >> >> >of reset. It allows to reset the hardware components of the
> >> >> >entire device and supports the following fields:
> >> >> >
> >> >> >component:
> >> >> >----------
> >> >> >1. MGMT : Management processor.
> >> >> >2. DMA : DMA engine.
> >> >> >3. RAM : RAM shared between multiple components.
> >> >> >4. AP : Application processor.
> >> >> >5. ROCE : RoCE management processor.
> >> >> >6. All : All possible components.
> >> >> >
> >> >> >Drivers are allowed to reset only a subset of requested components.
> >> >>
> >> >> I don't understand why would user ever want to do this. He does not care
> >> >> about some magic hw entities. He just expects the hw to work. I don't
> >> >> undestand the purpose of exposing something like this. Could you please
> >> >> explain in details? Thanks!
> >> >>
> >> >If a user requests multiple components and if the driver is only able
> >> >to honor a subset, the driver will return the components unset which
> >> >it is able to reset.  For example, if a user requests MGMT, RAM and
> >> >ROCE components to be reset and driver resets only MGMT and ROCE.
> >> >Driver will unset only MGMT and ROCE bits and notifies the user that
> >> >RAM is not reset.
> >> >
> >> >This will be useful for drivers to reset only a subset of components
> >> >requested instead of returning error or silently doing only a subset
> >> >of components.
> >> >
> >> >Also, this will be helpful as user will not know the components
> >> >supported by different vendors.
> >>
> >> Your reply does not seem to be related to my question :/
> >I thought that you were referring to: "Drivers are allowed to reset
> >only a subset of requested components."
> >
> >or were you referring to components? If yes, the user can select the
> >components that he wants to go for reset. This will be useful in the
> >case where, if the user flashed only a certain component and he wants
> >to reset that particular component. For example, in the case of SOC
> >there are 2 components: MGMT and AP. If a user flashes only
> >application processor, he can choose to reset only application
> >processor.
>
> We already have notion of "a component" in "devlink dev flash". I think
> that the reset component name should be in-sync with the flash.
>
> Thinking about it a bit more, we can extend the flash command by "reset"
> attribute that would indicate use wants to do flash&reset right away.
>
> Also, thinking how this all aligns with "devlink dev reload" which we
> currently have. The purpose of it is to re-instantiate driver instances,
> but in case of mlxsw it means friggering FW reset as well.
>
> Moshe (cced) is now working on "devlink dev reload" extension that would
> allow user to ask for a certain level of reload: driver instances only,
> fw reset too, live fw patching, etc.
>
> Not sure how this overlaps with your intentions. I think it would be
> great to see Moshe's RFC here as well so we can aligh the efforts.
Are the patches posted yet?

>
>
> >
> >>
> >>
> >> >
> >> >Thanks,
> >> >Vasundhara
> >> >
> >> >>
> >> >> >
> >> >> >width:
> >> >> >------
> >> >> >1. single - single host.
> >> >> >2. multi  - Multi host.
> >> >> >
> >> >> >mode:
> >> >> >-----
> >> >> >1. deferred - Reset will happen after unloading all the host drivers
> >> >> >              on the device. This is be default reset type, if user
> >> >> >              does not specify the type.
> >> >> >2. live - Reset will happen immediately with all host drivers loaded
> >> >> >          in real time. If the live reset is not supported, driver
> >> >> >          will return the error.
> >> >> >
> >> >> >This patch is a proposal in continuation to discussion to the
> >> >> >following thread:
> >> >> >
> >> >> >"[PATCH v3 net-next 0/6] bnxt_en: Add 'enable_live_dev_reset' and 'allow_live_dev_reset' generic devlink params."
> >> >> >
> >> >> >and here is the URL to the patch series:
> >> >> >
> >> >> >https://patchwork.ozlabs.org/project/netdev/list/?series=180426&state=*
> >> >> >
> >> >> >If the proposal looks good, I will re-send the whole patchset
> >> >> >including devlink changes and driver usage.
> >> >> >
> >> >> >Signed-off-by: Vasundhara Volam <vasundhara-v.volam@...adcom.com>
> >> >> >Reviewed-by: Michael Chan <michael.chan@...adcom.com>
> >> >> >---
> >> >> >v2:
> >> >> >- Switch RAM and AP component definitions.
> >> >> >- Remove IRQ, FILTER, OFFLOAD, MAC, PHY components as they are port
> >> >> >specific components.
> >> >> >- Rename function to host in width parameter.
> >> >> >---
> >> >> > Documentation/networking/devlink/devlink-reset.rst | 50 +++++++++++++
> >> >> > include/net/devlink.h                              |  2 +
> >> >> > include/uapi/linux/devlink.h                       | 46 ++++++++++++
> >> >> > net/core/devlink.c                                 | 85 ++++++++++++++++++++++
> >> >> > 4 files changed, 183 insertions(+)
> >> >> > create mode 100644 Documentation/networking/devlink/devlink-reset.rst
> >> >> >
> >> >> >diff --git a/Documentation/networking/devlink/devlink-reset.rst b/Documentation/networking/devlink/devlink-reset.rst
> >> >> >new file mode 100644
> >> >> >index 0000000..652800d
> >> >> >--- /dev/null
> >> >> >+++ b/Documentation/networking/devlink/devlink-reset.rst
> >> >> >@@ -0,0 +1,50 @@
> >> >> >+.. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >> >> >+
> >> >> >+.. _devlink_reset:
> >> >> >+
> >> >> >+=============
> >> >> >+Devlink reset
> >> >> >+=============
> >> >> >+
> >> >> >+The ``devlink-reset`` API allows reset the hardware components of the device. After the reset,
> >> >> >+device loads the pending updated firmware image.
> >> >> >+Example use::
> >> >> >+
> >> >> >+  $ devlink dev reset pci/0000:05:00.0 components COMPONENTS
> >> >> >+
> >> >> >+Note that user can mention multiple components.
> >> >> >+
> >> >> >+================
> >> >> >+Reset components
> >> >> >+================
> >> >> >+
> >> >> >+List of available components::
> >> >> >+
> >> >> >+``DEVLINK_RESET_COMP_MGMT`` - Management processor.
> >> >> >+``DEVLINK_RESET_COMP_DMA`` - DMA engine.
> >> >> >+``DEVLINK_RESET_COMP_RAM`` - RAM shared between multiple components.
> >> >> >+``DEVLINK_RESET_COMP_AP``   - Application processor.
> >> >> >+``DEVLINK_RESET_COMP_ROCE`` - RoCE management processor.
> >> >> >+``DEVLINK_RESET_COMP_ALL``  - All components.
> >> >> >+
> >> >> >+===========
> >> >> >+Reset width
> >> >> >+===========
> >> >> >+
> >> >> >+List of available widths::
> >> >> >+
> >> >> >+``DEVLINK_RESET_WIDTH_SINGLE`` - Device is used by single dedicated host.
> >> >> >+``DEVLINK_RESET_WIDTH_MULTI``  - Device is shared across multiple hosts.
> >> >> >+
> >> >> >+Note that if user specifies DEVLINK_RESET_WIDTH_SINGLE in a multi-host environment, driver returns
> >> >> >+error if it does not support resetting a single host.
> >> >> >+
> >> >> >+===========
> >> >> >+Reset modes
> >> >> >+===========
> >> >> >+
> >> >> >+List of available reset modes::
> >> >> >+
> >> >> >+``DEVLINK_RESET_MODE_DEFERRED``  - Reset happens after all host drivers are unloaded on the device.
> >> >> >+``DEVLINK_RESET_MODE_LIVE``      - Reset happens immediately, with all loaded host drivers in real
> >> >> >+                                   time.
> >> >> >diff --git a/include/net/devlink.h b/include/net/devlink.h
> >> >> >index 428f55f..a71c8f5 100644
> >> >> >--- a/include/net/devlink.h
> >> >> >+++ b/include/net/devlink.h
> >> >> >@@ -1129,6 +1129,8 @@ struct devlink_ops {
> >> >> >       int (*port_function_hw_addr_set)(struct devlink *devlink, struct devlink_port *port,
> >> >> >                                        const u8 *hw_addr, int hw_addr_len,
> >> >> >                                        struct netlink_ext_ack *extack);
> >> >> >+      int (*reset)(struct devlink *devlink, u32 *components, u8 width, u8 mode,
> >> >> >+                   struct netlink_ext_ack *extack);
> >> >> > };
> >> >> >
> >> >> > static inline void *devlink_priv(struct devlink *devlink)
> >> >> >diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h
> >> >> >index 87c83a8..6f32c00 100644
> >> >> >--- a/include/uapi/linux/devlink.h
> >> >> >+++ b/include/uapi/linux/devlink.h
> >> >> >@@ -122,6 +122,9 @@ enum devlink_command {
> >> >> >       DEVLINK_CMD_TRAP_POLICER_NEW,
> >> >> >       DEVLINK_CMD_TRAP_POLICER_DEL,
> >> >> >
> >> >> >+      DEVLINK_CMD_RESET,
> >> >> >+      DEVLINK_CMD_RESET_STATUS,       /* notification only */
> >> >> >+
> >> >> >       /* add new commands above here */
> >> >> >       __DEVLINK_CMD_MAX,
> >> >> >       DEVLINK_CMD_MAX = __DEVLINK_CMD_MAX - 1
> >> >> >@@ -265,6 +268,44 @@ enum devlink_trap_type {
> >> >> >       DEVLINK_TRAP_TYPE_CONTROL,
> >> >> > };
> >> >> >
> >> >> >+/**
> >> >> >+ * enum devlink_reset_component - Reset components.
> >> >> >+ * @DEVLINK_RESET_COMP_MGMT: Management processor.
> >> >> >+ * @DEVLINK_RESET_COMP_DMA: DMA engine.
> >> >> >+ * @DEVLINK_RESET_COMP_RAM: RAM shared between multiple components.
> >> >> >+ * @DEVLINK_RESET_COMP_AP: Application processor.
> >> >> >+ * @DEVLINK_RESET_COMP_ROCE: RoCE management processor.
> >> >> >+ * @DEVLINK_RESET_COMP_ALL: All components.
> >> >> >+ */
> >> >> >+enum devlink_reset_component {
> >> >> >+      DEVLINK_RESET_COMP_MGMT         = (1 << 0),
> >> >> >+      DEVLINK_RESET_COMP_DMA          = (1 << 1),
> >> >> >+      DEVLINK_RESET_COMP_RAM          = (1 << 2),
> >> >> >+      DEVLINK_RESET_COMP_AP           = (1 << 3),
> >> >> >+      DEVLINK_RESET_COMP_ROCE         = (1 << 4),
> >> >> >+      DEVLINK_RESET_COMP_ALL          = 0xffffffff,
> >> >> >+};
> >> >> >+
> >> >> >+/**
> >> >> >+ * enum devlink_reset_width - Number of hosts effected by reset.
> >> >> >+ * @DEVLINK_RESET_WIDTH_SINGLE: Device is used by single dedicated host.
> >> >> >+ * @DEVLINK_RESET_WIDTH_MULTI: Device is shared across multiple hosts.
> >> >> >+ */
> >> >> >+enum devlink_reset_width {
> >> >> >+      DEVLINK_RESET_WIDTH_SINGLE      = 0,
> >> >> >+      DEVLINK_RESET_WIDTH_MULTI       = 1,
> >> >> >+};
> >> >> >+
> >> >> >+/**
> >> >> >+ * enum devlink_reset_mode - Modes of reset.
> >> >> >+ * @DEVLINK_RESET_MODE_DEFERRED: Reset will happen after host drivers are unloaded.
> >> >> >+ * @DEVLINK_RESET_MODE_LIVE: All host drivers also will be reset without reloading manually.
> >> >> >+ */
> >> >> >+enum devlink_reset_mode {
> >> >> >+      DEVLINK_RESET_MODE_DEFERRED     = 0,
> >> >> >+      DEVLINK_RESET_MODE_LIVE         = 1,
> >> >> >+};
> >> >> >+
> >> >> > enum {
> >> >> >       /* Trap can report input port as metadata */
> >> >> >       DEVLINK_ATTR_TRAP_METADATA_TYPE_IN_PORT,
> >> >> >@@ -455,6 +496,11 @@ enum devlink_attr {
> >> >> >
> >> >> >       DEVLINK_ATTR_INFO_BOARD_SERIAL_NUMBER,  /* string */
> >> >> >
> >> >> >+      DEVLINK_ATTR_RESET_COMPONENTS,          /* u32 */
> >> >> >+      DEVLINK_ATTR_RESET_WIDTH,               /* u8 */
> >> >> >+      DEVLINK_ATTR_RESET_MODE,                /* u8 */
> >> >> >+      DEVLINK_ATTR_RESET_STATUS_MSG,          /* string */
> >> >> >+
> >> >> >       /* add new attributes above here, update the policy in devlink.c */
> >> >> >
> >> >> >       __DEVLINK_ATTR_MAX,
> >> >> >diff --git a/net/core/devlink.c b/net/core/devlink.c
> >> >> >index 6ae3680..c0eebc5 100644
> >> >> >--- a/net/core/devlink.c
> >> >> >+++ b/net/core/devlink.c
> >> >> >@@ -6797,6 +6797,82 @@ static int devlink_nl_cmd_trap_policer_set_doit(struct sk_buff *skb,
> >> >> >       return devlink_trap_policer_set(devlink, policer_item, info);
> >> >> > }
> >> >> >
> >> >> >+static int devlink_nl_reset_fill(struct sk_buff *msg, struct devlink *devlink,
> >> >> >+                               const char *status_msg, u32 components)
> >> >> >+{
> >> >> >+      void *hdr;
> >> >> >+
> >> >> >+      hdr = genlmsg_put(msg, 0, 0, &devlink_nl_family, 0, DEVLINK_CMD_RESET_STATUS);
> >> >> >+      if (!hdr)
> >> >> >+              return -EMSGSIZE;
> >> >> >+
> >> >> >+      if (devlink_nl_put_handle(msg, devlink))
> >> >> >+              goto nla_put_failure;
> >> >> >+
> >> >> >+      if (status_msg && nla_put_string(msg, DEVLINK_ATTR_RESET_STATUS_MSG, status_msg))
> >> >> >+              goto nla_put_failure;
> >> >> >+
> >> >> >+      if (nla_put_u32(msg, DEVLINK_ATTR_RESET_COMPONENTS, components))
> >> >> >+              goto nla_put_failure;
> >> >> >+
> >> >> >+      genlmsg_end(msg, hdr);
> >> >> >+      return 0;
> >> >> >+
> >> >> >+nla_put_failure:
> >> >> >+      genlmsg_cancel(msg, hdr);
> >> >> >+      return -EMSGSIZE;
> >> >> >+}
> >> >> >+
> >> >> >+static void __devlink_reset_notify(struct devlink *devlink, const char *status_msg, u32 components)
> >> >> >+{
> >> >> >+      struct sk_buff *msg;
> >> >> >+      int err;
> >> >> >+
> >> >> >+      msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
> >> >> >+      if (!msg)
> >> >> >+              return;
> >> >> >+
> >> >> >+      err = devlink_nl_reset_fill(msg, devlink, status_msg, components);
> >> >> >+      if (err)
> >> >> >+              goto out;
> >> >> >+
> >> >> >+      genlmsg_multicast_netns(&devlink_nl_family, devlink_net(devlink), msg, 0,
> >> >> >+                              DEVLINK_MCGRP_CONFIG, GFP_KERNEL);
> >> >> >+      return;
> >> >> >+
> >> >> >+out:
> >> >> >+      nlmsg_free(msg);
> >> >> >+}
> >> >> >+
> >> >> >+static int devlink_nl_cmd_reset(struct sk_buff *skb, struct genl_info *info)
> >> >> >+{
> >> >> >+      struct devlink *devlink = info->user_ptr[0];
> >> >> >+      u32 components, req_comps;
> >> >> >+      struct nlattr *nla_type;
> >> >> >+      u8 width, mode;
> >> >> >+      int err;
> >> >> >+
> >> >> >+      if (!devlink->ops->reset)
> >> >> >+              return -EOPNOTSUPP;
> >> >> >+
> >> >> >+      if (!info->attrs[DEVLINK_ATTR_RESET_COMPONENTS])
> >> >> >+              return -EINVAL;
> >> >> >+      components = nla_get_u32(info->attrs[DEVLINK_ATTR_RESET_COMPONENTS]);
> >> >> >+
> >> >> >+      nla_type = info->attrs[DEVLINK_ATTR_RESET_WIDTH];
> >> >> >+      width = nla_type ? nla_get_u8(nla_type) : DEVLINK_RESET_WIDTH_SINGLE;
> >> >> >+
> >> >> >+      nla_type = info->attrs[DEVLINK_ATTR_RESET_MODE];
> >> >> >+      mode = nla_type ? nla_get_u8(nla_type) : DEVLINK_RESET_MODE_DEFERRED;
> >> >> >+
> >> >> >+      req_comps = components;
> >> >> >+      __devlink_reset_notify(devlink, "Reset request", components);
> >> >> >+      err = devlink->ops->reset(devlink, &components, width, mode, info->extack);
> >> >> >+      __devlink_reset_notify(devlink, "Components reset", req_comps & ~components);
> >> >> >+
> >> >> >+      return err;
> >> >> >+}
> >> >> >+
> >> >> > static const struct nla_policy devlink_nl_policy[DEVLINK_ATTR_MAX + 1] = {
> >> >> >       [DEVLINK_ATTR_UNSPEC] = { .strict_start_type =
> >> >> >               DEVLINK_ATTR_TRAP_POLICER_ID },
> >> >> >@@ -6842,6 +6918,9 @@ static int devlink_nl_cmd_trap_policer_set_doit(struct sk_buff *skb,
> >> >> >       [DEVLINK_ATTR_TRAP_POLICER_RATE] = { .type = NLA_U64 },
> >> >> >       [DEVLINK_ATTR_TRAP_POLICER_BURST] = { .type = NLA_U64 },
> >> >> >       [DEVLINK_ATTR_PORT_FUNCTION] = { .type = NLA_NESTED },
> >> >> >+      [DEVLINK_ATTR_RESET_COMPONENTS] = { .type = NLA_U32 },
> >> >> >+      [DEVLINK_ATTR_RESET_WIDTH] = { .type = NLA_U8 },
> >> >> >+      [DEVLINK_ATTR_RESET_MODE] = { .type = NLA_U8 },
> >> >> > };
> >> >> >
> >> >> > static const struct genl_ops devlink_nl_ops[] = {
> >> >> >@@ -7190,6 +7269,12 @@ static int devlink_nl_cmd_trap_policer_set_doit(struct sk_buff *skb,
> >> >> >               .flags = GENL_ADMIN_PERM,
> >> >> >               .internal_flags = DEVLINK_NL_FLAG_NEED_DEVLINK,
> >> >> >       },
> >> >> >+      {
> >> >> >+              .cmd = DEVLINK_CMD_RESET,
> >> >> >+              .doit = devlink_nl_cmd_reset,
> >> >> >+              .flags = GENL_ADMIN_PERM,
> >> >> >+              .internal_flags = DEVLINK_NL_FLAG_NEED_DEVLINK,
> >> >> >+      },
> >> >> > };
> >> >> >
> >> >> > static struct genl_family devlink_nl_family __ro_after_init = {
> >> >> >--
> >> >> >1.8.3.1
> >> >> >

Powered by blists - more mailing lists