netdev - [PATCH net-next v2 6/7] ARM: dts: at91: sama5d4: add an mdio sub-node to macb

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200721171316.1427582-7-codrin.ciubotariu@microchip.com>
Date:   Tue, 21 Jul 2020 20:13:15 +0300
From:   Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>
To:     <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
CC:     <nicolas.ferre@...rochip.com>, <claudiu.beznea@...rochip.com>,
        <davem@...emloft.net>, <kuba@...nel.org>, <andrew@...n.ch>,
        <f.fainelli@...il.com>, <robh+dt@...nel.org>,
        <alexandre.belloni@...tlin.com>, <ludovic.desroches@...rochip.com>,
        "Codrin Ciubotariu" <codrin.ciubotariu@...rochip.com>
Subject: [PATCH net-next v2 6/7] ARM: dts: at91: sama5d4: add an mdio sub-node to macb

Use the new macb bindings and add an mdio sub-node to contain all the
phy nodes.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>
---

Changes in v2:
 - none

 arch/arm/boot/dts/at91-sama5d4_xplained.dts | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index 924d9491780d..62598d06aead 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -59,10 +59,14 @@ macb0: ethernet@...20000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 
-				phy0: ethernet-phy@1 {
-					interrupt-parent = <&pioE>;
-					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-					reg = <1>;
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					phy0: ethernet-phy@1 {
+						interrupt-parent = <&pioE>;
+						interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+						reg = <1>;
+					};
 				};
 			};
 
-- 
2.25.1