netdev - [PATCH devicetree 0/4] Add Seville Ethernet switch to T1040RDB

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 22 Jul 2020 20:24:18 +0300
From:   Vladimir Oltean <olteanv@...il.com>
To:     robh+dt@...nel.org, shawnguo@...nel.org, mpe@...erman.id.au,
        devicetree@...r.kernel.org
Cc:     benh@...nel.crashing.org, paulus@...ba.org,
        linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
        netdev@...r.kernel.org, madalin.bucur@....nxp.com,
        radu-andrei.bulie@....com, fido_max@...ox.ru
Subject: [PATCH devicetree 0/4] Add Seville Ethernet switch to T1040RDB

Seville is a DSA switch that is embedded inside the T1040 SoC, and
supported by the mscc_seville DSA driver. The driver has been accepted
this release cycle and is currently available in net-next (and
therefore, in linux-next).

This series adds this switch to the SoC's dtsi files and to the T1040RDB
board file.

Vladimir Oltean (4):
  powerpc: dts: t1040: add bindings for Seville Ethernet switch
  powerpc: dts: t1040: label the 2 MDIO controllers
  powerpc: dts: t1040rdb: put SGMII PHY under &mdio0 label
  powerpc: dts: t1040rdb: add ports for Seville Ethernet switch

 arch/powerpc/boot/dts/fsl/t1040rdb.dts      | 123 +++++++++++++++++++-
 arch/powerpc/boot/dts/fsl/t1040si-post.dtsi |  79 ++++++++++++-
 2 files changed, 194 insertions(+), 8 deletions(-)

-- 
2.25.1