lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 22 Jul 2020 13:26:46 -0400 (EDT)
From:   Mathieu Desnoyers <mathieu.desnoyers@...icios.com>
To:     netdev <netdev@...r.kernel.org>,
        Alexey Kuznetsov <kuznet@....inr.ac.ru>,
        Hideaki YOSHIFUJI <yoshfuji@...ux-ipv6.org>,
        David Ahern <dsahern@...nel.org>
Cc:     David Ahern <dsa@...ulusnetworks.com>,
        "David S. Miller" <davem@...emloft.net>
Subject: Re: [RFC PATCH] Fix: ipv4/icmp: icmp error route lookup performed
 on wrong routing table

Adding IPv4/IPv6 maintainers in CC, along with David Ahern's k.org email address.

----- On Jul 20, 2020, at 6:11 PM, Mathieu Desnoyers mathieu.desnoyers@...icios.com wrote:

> As per RFC792, ICMP errors should be sent to the source host.
> 
> However, in configurations with Virtual Forwarding and Routing tables,
> looking up which routing table to use is currently done by using the
> destination net_device.
> 
> commit 9d1a6c4ea43e ("net: icmp_route_lookup should use rt dev to
> determine L3 domain") changes the interfaces passed to
> l3mdev_master_ifindex() and inet_addr_type_dev_table() from skb_in->dev
> to skb_dst(skb_in)->dev in order to fix a NULL pointer dereference. This
> changes the interface used for routing table lookup from source to
> destination. Therefore, if the source and destination interfaces are
> within separate VFR, or one in the global routing table and the other in
> a VFR, looking up the source host in the destination interface's routing
> table is likely to fail.
> 
> One observable effect of this issue is that traceroute does not work in
> the following cases:
> 
> - Route leaking between global routing table and VRF
> - Route leaking between VRFs
> 
> [ Note 1: I'm not entirely sure what routing table should be used when
>  param->replyopts.opt.opt.srr is set ? Is it valid to honor Strict
>  Source Route when sending an ICMP error ? ]
> 
> [ Note 2: I notice that ipv6 icmp6_send() uses skb_dst(skb)->dev as
>  argument to l3mdev_master_ifindex(). I'm not sure if it is correct ? ]
> 
> [ This patch is only compile-tested. ]
> 
> Fixes: 9d1a6c4ea43e ("net: icmp_route_lookup should use rt dev to determine L3
> domain")
> Link: https://tools.ietf.org/html/rfc792
> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@...icios.com>
> Cc: David Ahern <dsa@...ulusnetworks.com>
> Cc: David S. Miller <davem@...emloft.net>
> Cc: netdev@...r.kernel.org
> ---
> net/ipv4/icmp.c | 12 ++++++++++--
> 1 file changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
> index e30515f89802..3d1da70c7293 100644
> --- a/net/ipv4/icmp.c
> +++ b/net/ipv4/icmp.c
> @@ -465,6 +465,7 @@ static struct rtable *icmp_route_lookup(struct net *net,
> 					int type, int code,
> 					struct icmp_bxm *param)
> {
> +	struct net_device *route_lookup_dev;
> 	struct rtable *rt, *rt2;
> 	struct flowi4 fl4_dec;
> 	int err;
> @@ -479,7 +480,14 @@ static struct rtable *icmp_route_lookup(struct net *net,
> 	fl4->flowi4_proto = IPPROTO_ICMP;
> 	fl4->fl4_icmp_type = type;
> 	fl4->fl4_icmp_code = code;
> -	fl4->flowi4_oif = l3mdev_master_ifindex(skb_dst(skb_in)->dev);
> +	/*
> +	 * The device used for looking up which routing table to use is
> +	 * preferably the source whenever it is set, which should ensure
> +	 * the icmp error can be sent to the source host, else fallback
> +	 * on the destination device.
> +	 */
> +	route_lookup_dev = skb_in->dev ? skb_in->dev : skb_dst(skb_in)->dev;
> +	fl4->flowi4_oif = l3mdev_master_ifindex(route_lookup_dev);
> 
> 	security_skb_classify_flow(skb_in, flowi4_to_flowi(fl4));
> 	rt = ip_route_output_key_hash(net, fl4, skb_in);
> @@ -503,7 +511,7 @@ static struct rtable *icmp_route_lookup(struct net *net,
> 	if (err)
> 		goto relookup_failed;
> 
> -	if (inet_addr_type_dev_table(net, skb_dst(skb_in)->dev,
> +	if (inet_addr_type_dev_table(net, route_lookup_dev,
> 				     fl4_dec.saddr) == RTN_LOCAL) {
> 		rt2 = __ip_route_output_key(net, &fl4_dec);
> 		if (IS_ERR(rt2))
> --
> 2.11.0

-- 
Mathieu Desnoyers
EfficiOS Inc.
http://www.efficios.com

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ