| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <0ae88dee-9872-bc20-87ed-fec4458d6162@solarflare.com>
Date: Fri, 24 Jul 2020 16:58:57 +0100
From: Edward Cree <ecree@...arflare.com>
To: <linux-net-drivers@...arflare.com>, <davem@...emloft.net>
CC: <netdev@...r.kernel.org>
Subject: [PATCH v4 net-next 08/16] sfc_ef100: implement MCDI transport
Signed-off-by: Edward Cree <ecree@...arflare.com>
---
drivers/net/ethernet/sfc/ef100_nic.c | 106 +++++++++++++++++++++++++++
drivers/net/ethernet/sfc/ef100_nic.h | 1 +
2 files changed, 107 insertions(+)
diff --git a/drivers/net/ethernet/sfc/ef100_nic.c b/drivers/net/ethernet/sfc/ef100_nic.c
index 802ab0ce00fe..189a8a706c0e 100644
--- a/drivers/net/ethernet/sfc/ef100_nic.c
+++ b/drivers/net/ethernet/sfc/ef100_nic.c
@@ -25,11 +25,23 @@
#include "ef100_netdev.h"
#define EF100_MAX_VIS 4096
+#define EF100_NUM_MCDI_BUFFERS 1
+#define MCDI_BUF_LEN (8 + MCDI_CTL_SDU_LEN_MAX)
#define EF100_RESET_PORT ((ETH_RESET_MAC | ETH_RESET_PHY) << ETH_RESET_SHARED_SHIFT)
/* MCDI
*/
+static u8 *ef100_mcdi_buf(struct efx_nic *efx, u8 bufid, dma_addr_t *dma_addr)
+{
+ struct ef100_nic_data *nic_data = efx->nic_data;
+
+ if (dma_addr)
+ *dma_addr = nic_data->mcdi_buf.dma_addr +
+ bufid * ALIGN(MCDI_BUF_LEN, 256);
+ return nic_data->mcdi_buf.addr + bufid * ALIGN(MCDI_BUF_LEN, 256);
+}
+
static int ef100_get_warm_boot_count(struct efx_nic *efx)
{
efx_dword_t reg;
@@ -46,6 +58,72 @@ static int ef100_get_warm_boot_count(struct efx_nic *efx)
}
}
+static void ef100_mcdi_request(struct efx_nic *efx,
+ const efx_dword_t *hdr, size_t hdr_len,
+ const efx_dword_t *sdu, size_t sdu_len)
+{
+ dma_addr_t dma_addr;
+ u8 *pdu = ef100_mcdi_buf(efx, 0, &dma_addr);
+
+ memcpy(pdu, hdr, hdr_len);
+ memcpy(pdu + hdr_len, sdu, sdu_len);
+ wmb();
+
+ /* The hardware provides 'low' and 'high' (doorbell) registers
+ * for passing the 64-bit address of an MCDI request to
+ * firmware. However the dwords are swapped by firmware. The
+ * least significant bits of the doorbell are then 0 for all
+ * MCDI requests due to alignment.
+ */
+ _efx_writed(efx, cpu_to_le32((u64)dma_addr >> 32), efx_reg(efx, ER_GZ_MC_DB_LWRD));
+ _efx_writed(efx, cpu_to_le32((u32)dma_addr), efx_reg(efx, ER_GZ_MC_DB_HWRD));
+}
+
+static bool ef100_mcdi_poll_response(struct efx_nic *efx)
+{
+ const efx_dword_t hdr =
+ *(const efx_dword_t *)(ef100_mcdi_buf(efx, 0, NULL));
+
+ rmb();
+ return EFX_DWORD_FIELD(hdr, MCDI_HEADER_RESPONSE);
+}
+
+static void ef100_mcdi_read_response(struct efx_nic *efx,
+ efx_dword_t *outbuf, size_t offset,
+ size_t outlen)
+{
+ const u8 *pdu = ef100_mcdi_buf(efx, 0, NULL);
+
+ memcpy(outbuf, pdu + offset, outlen);
+}
+
+static int ef100_mcdi_poll_reboot(struct efx_nic *efx)
+{
+ struct ef100_nic_data *nic_data = efx->nic_data;
+ int rc;
+
+ rc = ef100_get_warm_boot_count(efx);
+ if (rc < 0) {
+ /* The firmware is presumably in the process of
+ * rebooting. However, we are supposed to report each
+ * reboot just once, so we must only do that once we
+ * can read and store the updated warm boot count.
+ */
+ return 0;
+ }
+
+ if (rc == nic_data->warm_boot_count)
+ return 0;
+
+ nic_data->warm_boot_count = rc;
+
+ return -EIO;
+}
+
+static void ef100_mcdi_reboot_detected(struct efx_nic *efx)
+{
+}
+
/* Event handling
*/
static int ef100_ev_probe(struct efx_channel *channel)
@@ -139,6 +217,11 @@ const struct efx_nic_type ef100_pf_nic_type = {
.is_vf = false,
.probe = ef100_probe_pf,
.mcdi_max_ver = 2,
+ .mcdi_request = ef100_mcdi_request,
+ .mcdi_poll_response = ef100_mcdi_poll_response,
+ .mcdi_read_response = ef100_mcdi_read_response,
+ .mcdi_poll_reboot = ef100_mcdi_poll_reboot,
+ .mcdi_reboot_detected = ef100_mcdi_reboot_detected,
.irq_enable_master = efx_port_dummy_op_void,
.irq_disable_non_ev = efx_port_dummy_op_void,
.push_irq_moderation = efx_channel_dummy_op_void,
@@ -178,6 +261,15 @@ static int ef100_probe_main(struct efx_nic *efx)
net_dev->features |= efx->type->offload_features;
net_dev->hw_features |= efx->type->offload_features;
+ /* we assume later that we can copy from this buffer in dwords */
+ BUILD_BUG_ON(MCDI_CTL_SDU_LEN_MAX_V2 % 4);
+
+ /* MCDI buffers must be 256 byte aligned. */
+ rc = efx_nic_alloc_buffer(efx, &nic_data->mcdi_buf, MCDI_BUF_LEN,
+ GFP_KERNEL);
+ if (rc)
+ goto fail;
+
/* Get the MC's warm boot count. In case it's rebooting right
* now, be prepared to retry.
*/
@@ -201,6 +293,16 @@ static int ef100_probe_main(struct efx_nic *efx)
/* Post-IO section. */
+ rc = efx_mcdi_init(efx);
+ if (!rc && efx->mcdi->fn_flags &
+ (1 << MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_NO_ACTIVE_PORT)) {
+ netif_info(efx, probe, efx->net_dev,
+ "No network port on this PCI function");
+ rc = -ENODEV;
+ }
+ if (rc)
+ goto fail;
+
efx->max_vis = EF100_MAX_VIS;
rc = ef100_phy_probe(efx);
@@ -233,6 +335,10 @@ void ef100_remove(struct efx_nic *efx)
efx_fini_channels(efx);
kfree(efx->phy_data);
efx->phy_data = NULL;
+ efx_mcdi_detach(efx);
+ efx_mcdi_fini(efx);
+ if (nic_data)
+ efx_nic_free_buffer(efx, &nic_data->mcdi_buf);
kfree(nic_data);
efx->nic_data = NULL;
}
diff --git a/drivers/net/ethernet/sfc/ef100_nic.h b/drivers/net/ethernet/sfc/ef100_nic.h
index 643111aebba5..a4290d183879 100644
--- a/drivers/net/ethernet/sfc/ef100_nic.h
+++ b/drivers/net/ethernet/sfc/ef100_nic.h
@@ -19,6 +19,7 @@ void ef100_remove(struct efx_nic *efx);
struct ef100_nic_data {
struct efx_nic *efx;
+ struct efx_buffer mcdi_buf;
u16 warm_boot_count;
};
Powered by blists - more mailing lists