netdev - Re: [PATCH RFC leds + net-next v3 2/2] net: phy: marvell: add support for PHY LEDs via LED class

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200725092339.GB29492@amd>
Date:   Sat, 25 Jul 2020 11:23:39 +0200
From:   Pavel Machek <pavel@....cz>
To:     Marek Behún <marek.behun@....cz>
Cc:     netdev@...r.kernel.org, linux-leds@...r.kernel.org,
        jacek.anaszewski@...il.com, Dan Murphy <dmurphy@...com>,
        Ondřej Jirman <megous@...ous.com>,
        Russell King <linux@...linux.org.uk>,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
        Gregory Clement <gregory.clement@...tlin.com>,
        Andrew Lunn <andrew@...n.ch>, linux-kernel@...r.kernel.org
Subject: Re: [PATCH RFC leds + net-next v3 2/2] net: phy: marvell: add
 support for PHY LEDs via LED class

Hi!

> +static const struct marvell_led_mode_info marvell_led_mode_info[] = {
> +	{ "link",			{ 0x0,  -1, 0x0,  -1,  -1,  -1, }, 0 },
> +	{ "link/act",			{ 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, }, 0 },
> +	{ "1Gbps/100Mbps/10Mbps",	{ 0x2,  -1,  -1,  -1,  -1,  -1, }, 0 },

is this "1Gbps-10Mbps"?

> +	{ "act",			{ 0x3, 0x3, 0x3, 0x3, 0x3, 0x3, }, 0 },
> +	{ "blink-act",			{ 0x4, 0x4, 0x4, 0x4, 0x4, 0x4, }, 0 },
> +	{ "tx",				{ 0x5,  -1, 0x5,  -1, 0x5, 0x5, }, 0 },
> +	{ "tx",				{  -1,  -1,  -1, 0x5,  -1,  -1, }, L3V5_TRANS },
> +	{ "rx",				{  -1,  -1,  -1,  -1, 0x0, 0x0, }, 0 },
> +	{ "rx",				{  -1, 0x0,  -1,  -1,  -1,  -1, }, L1V0_RECV },
> +	{ "copper",			{ 0x6,  -1,  -1,  -1,  -1,  -1, }, 0 },
> +	{ "copper",			{  -1, 0x0,  -1,  -1,  -1,  -1, }, L1V0_COPPER },
> +	{ "1Gbps",			{ 0x7,  -1,  -1,  -1,  -1,  -1, }, 0 },
> +	{ "link/rx",			{  -1, 0x2,  -1, 0x2, 0x2, 0x2, }, 0 },
> +	{ "100Mbps-fiber",		{  -1, 0x5,  -1,  -1,  -1,  -1, }, L1V5_100_FIBER },
> +	{ "100Mbps-10Mbps",		{  -1, 0x5,  -1,  -1,  -1,  -1, }, L1V5_100_10 },
> +	{ "1Gbps-100Mbps",		{  -1, 0x6,  -1,  -1,  -1,  -1, }, 0 },
> +	{ "1Gbps-10Mbps",		{  -1,  -1, 0x6, 0x6,  -1,  -1, }, 0 },
> +	{ "100Mbps",			{  -1, 0x7,  -1,  -1,  -1,  -1, }, 0 },
> +	{ "10Mbps",			{  -1,  -1, 0x7,  -1,  -1,  -1, }, 0 },
> +	{ "fiber",			{  -1,  -1,  -1, 0x0,  -1,  -1, }, L3V0_FIBER },
> +	{ "fiber",			{  -1,  -1,  -1, 0x7,  -1,  -1, }, L3V7_FIBER },
> +	{ "FullDuplex",			{  -1,  -1,  -1, 0x7,  -1,  -1, }, L3V7_DUPLEX },
> +	{ "FullDuplex",			{  -1,  -1,  -1,  -1, 0x6, 0x6, }, 0 },
> +	{ "FullDuplex/collision",	{  -1,  -1,  -1,  -1, 0x7, 0x7, }, 0 },
> +	{ "FullDuplex/collision",	{  -1,  -1, 0x2,  -1,  -1,  -1, }, L2V2_DUPLEX },
> +	{ "ptp",			{  -1,  -1, 0x2,  -1,  -1,  -1, }, L2V2_PTP },
> +	{ "init",			{  -1,  -1, 0x2,  -1,  -1,  -1, }, L2V2_INIT },
> +	{ "los",			{  -1,  -1,  -1, 0x0,  -1,  -1, }, L3V0_LOS },
> +	{ "hi-z",			{ 0xa, 0xa, 0xa, 0xa, 0xa, 0xa, }, 0 },
> +	{ "blink",			{ 0xb, 0xb, 0xb, 0xb, 0xb, 0xb, }, 0 },
> +};

Certainly more documentation will be required here, what "ptp" setting
does, for example, is not very obvious to me.

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Download attachment "signature.asc" of type "application/pgp-signature" (182 bytes)