| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 27 Jul 2020 13:18:28 -0400
From: Bryan Whitehead <Bryan.Whitehead@...rochip.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, UNGLinuxDriver@...rochip.com,
andrew@...n.ch, f.fainelli@...il.com, hkallweit1@...il.com,
linux@...linux.org.uk
Subject: [PATCH v2 net-next] mscc: Add LCPLL Reset to VSC8574 Family of phy drivers
The LCPLL Reset sequence is added to the initialization path
of the VSC8574 Family of phy drivers.
The LCPLL Reset sequence is known to reduce hardware inter-op
issues when using the QSGMII MAC interface.
This patch is submitted to net-next to avoid merging conflicts that
may arise if submitted to net.
V2 Updates:
Make use of read_poll_timeout for micro command completion.
Combine command starter and timeout into helper function
vsc8574_micro_command
Removed unused variable reg_val from vsc8574_reset_lcpll
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@...rochip.com>
---
drivers/net/phy/mscc/mscc_main.c | 77 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 77 insertions(+)
diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index a4fbf3a..db34faac 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -929,6 +929,77 @@ static bool vsc8574_is_serdes_init(struct phy_device *phydev)
}
/* bus->mdio_lock should be locked when using this function */
+/* Page should already be set to MSCC_PHY_PAGE_EXTENDED_GPIO */
+static int vsc8574_micro_command(struct phy_device *phydev, u16 command)
+{
+ u16 reg18g = 0;
+
+ phy_base_write(phydev, 18, command);
+
+ return read_poll_timeout(phy_base_read, reg18g,
+ !(reg18g & 0x8000),
+ 4000, 500000, 0, phydev, 18);
+}
+
+/* bus->mdio_lock should be locked when using this function */
+static int vsc8574_reset_lcpll(struct phy_device *phydev)
+{
+ int ret = 0;
+
+ phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
+ MSCC_PHY_PAGE_EXTENDED_GPIO);
+
+ /* Read LCPLL config vector into PRAM */
+ ret = vsc8574_micro_command(phydev, 0x8023);
+ if (ret)
+ goto done;
+
+ /* Set Address to Poke */
+ ret = vsc8574_micro_command(phydev, 0xd7d5);
+ if (ret)
+ goto done;
+
+ /* Poke to reset PLL Start up State Machine,
+ * set disable_fsm:bit 119
+ */
+ ret = vsc8574_micro_command(phydev, 0x8d06);
+ if (ret)
+ goto done;
+
+ /* Rewrite PLL config vector */
+ ret = vsc8574_micro_command(phydev, 0x80c0);
+ if (ret)
+ goto done;
+
+ usleep_range(10000, 20000);
+
+ /* Poke to deassert Reset of PLL State Machine,
+ * clear disable_fsm:bit 119
+ */
+ ret = vsc8574_micro_command(phydev, 0x8506);
+ if (ret)
+ goto done;
+
+ /* Rewrite PLL config vector */
+ ret = vsc8574_micro_command(phydev, 0x80c0);
+ if (ret)
+ goto done;
+
+ usleep_range(10000, 20000);
+
+ phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS,
+ MSCC_PHY_PAGE_EXTENDED_3);
+ phy_base_read(phydev, 20);
+ phy_base_read(phydev, 20);
+
+ usleep_range(110000, 200000);
+
+done:
+ phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
+ return ret;
+}
+
+/* bus->mdio_lock should be locked when using this function */
static int vsc8574_config_pre_init(struct phy_device *phydev)
{
static const struct reg_val pre_init1[] = {
@@ -1002,6 +1073,12 @@ static int vsc8574_config_pre_init(struct phy_device *phydev)
bool serdes_init;
int ret;
+ ret = vsc8574_reset_lcpll(phydev);
+ if (ret) {
+ dev_err(dev, "failed lcpll reset\n");
+ return ret;
+ }
+
phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD);
/* all writes below are broadcasted to all PHYs in the same package */
--
2.7.4
Powered by blists - more mailing lists