netdev - Re: [PATCH V4 4/6] vhost_vdpa: implement IRQ offloading in vhost

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200729111306.GE35280@mtl-vdi-166.wap.labs.mlnx>
Date:   Wed, 29 Jul 2020 14:13:06 +0300
From:   Eli Cohen <eli@...lanox.com>
To:     Jason Wang <jasowang@...hat.com>
Cc:     Zhu Lingshan <lingshan.zhu@...el.com>, alex.williamson@...hat.com,
        mst@...hat.com, pbonzini@...hat.com,
        sean.j.christopherson@...el.com, wanpengli@...cent.com,
        virtualization@...ts.linux-foundation.org, netdev@...r.kernel.org,
        kvm@...r.kernel.org, shahafs@...lanox.com, parav@...lanox.com
Subject: Re: [PATCH V4 4/6] vhost_vdpa: implement IRQ offloading in vhost_vdpa

On Wed, Jul 29, 2020 at 06:19:52PM +0800, Jason Wang wrote:
I am checking internally if we can work in a mode not requiring to
acknowledge the interrupt. I will update.

Thanks for the explanations.

> 
> On 2020/7/29 下午5:55, Eli Cohen wrote:
> >On Wed, Jul 29, 2020 at 05:21:53PM +0800, Jason Wang wrote:
> >>On 2020/7/28 下午5:04, Eli Cohen wrote:
> >>>On Tue, Jul 28, 2020 at 12:24:03PM +0800, Zhu Lingshan wrote:
> >>>>+static void vhost_vdpa_setup_vq_irq(struct vhost_vdpa *v, int qid)
> >>>>+{
> >>>>+	struct vhost_virtqueue *vq = &v->vqs[qid];
> >>>>+	const struct vdpa_config_ops *ops = v->vdpa->config;
> >>>>+	struct vdpa_device *vdpa = v->vdpa;
> >>>>+	int ret, irq;
> >>>>+
> >>>>+	spin_lock(&vq->call_ctx.ctx_lock);
> >>>>+	irq = ops->get_vq_irq(vdpa, qid);
> >>>>+	if (!vq->call_ctx.ctx || irq == -EINVAL) {
> >>>>+		spin_unlock(&vq->call_ctx.ctx_lock);
> >>>>+		return;
> >>>>+	}
> >>>>+
> >>>If I understand correctly, this will cause these IRQs to be forwarded
> >>>directly to the VCPU, e.g. will be handled by the guest/qemu.
> >>
> >>Yes, if it can bypassed, the interrupt will be delivered to vCPU directly.
> >>
> >So, usually the network driver knows how to handle interrups for its
> >devices. I assume the virtio_net driver at the guest has some default
> >processing but what if the underlying hardware device (such as the case
> >of vdpa) needs to take some actions?
> 
> 
> Virtio splits the bus operations out of device operations. So did
> the driver.
> 
> The virtio-net driver depends on a transport driver to talk to the
> real device. Usually PCI is used as the transport for the device. In
> this case virtio-pci driver is in charge of dealing with irq
> allocation/free/configuration and it needs to co-operate with
> platform specific irqchip (virtualized by KVM) to finish the work
> like irq acknowledge etc.  E.g for x86, the irq offloading can only
> work when there's a hardware support of virtual irqchip (APICv) then
> all stuffs could be done without vmexits.
> 
> So no vendor specific part since the device and transport are all standard.
> 
> 
> >  Is there an option to do bounce the
> >interrupt back to the vendor specific driver in the host so it can take
> >these actions?
> 
> 
> Currently not, but even if we can do this, I'm afraid we will lose
> the performance advantage of irq bypassing.
> 
> 
> >
> >>>Does this mean that the host will not handle this interrupt? How does it
> >>>work in case on level triggered interrupts?
> >>
> >>There's no guarantee that the KVM arch code can make sure the irq
> >>bypass work for any type of irq. So if they the irq will still need
> >>to be handled by host first. This means we should keep the host
> >>interrupt handler as a slowpath (fallback).
> >>
> >>>In the case of ConnectX, I need to execute some code to acknowledge the
> >>>interrupt.
> >>
> >>This turns out to be hard for irq bypassing to work. Is it because
> >>the irq is shared or what kind of ack you need to do?
> >I have an EQ which is a queue for events comming from the hardware. This
> >EQ can created so it reports only completion events but I still need to
> >execute code that roughly tells the device that I saw these event
> >records and then arm it again so it can report more interrupts (e.g if
> >more packets are received or sent). This is device specific code.
> 
> 
> Any chance that the hardware can use MSI (which is not the case here)?
> 
> Thanks
> 
> 
> >>Thanks
> >>
> >>
> >>>Can you explain how this should be done?
> >>>
>