[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200730102505.27039-2-hongbo.wang@nxp.com>
Date: Thu, 30 Jul 2020 18:25:04 +0800
From: hongbo.wang@....com
To: xiaoliang.yang_1@....com, allan.nielsen@...rochip.com,
po.liu@....com, claudiu.manoil@....com,
alexandru.marginean@....com, vladimir.oltean@....com,
leoyang.li@....com, mingkai.hu@....com, andrew@...n.ch,
f.fainelli@...il.com, vivien.didelot@...il.com,
davem@...emloft.net, jiri@...nulli.us, idosch@...sch.org,
kuba@...nel.org, vinicius.gomes@...el.com,
nikolay@...ulusnetworks.com, roopa@...ulusnetworks.com,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
horatiu.vultur@...rochip.com, alexandre.belloni@...tlin.com,
UNGLinuxDriver@...rochip.com, ivecera@...hat.com
Cc: "hongbo.wang" <hongbo.wang@....com>
Subject: [PATCH v4 1/2] net: dsa: Add protocol support for 802.1AD when adding or deleting vlan for dsa switch port
From: "hongbo.wang" <hongbo.wang@....com>
the following command will be supported:
Set bridge's vlan protocol:
ip link set br0 type bridge vlan_protocol 802.1ad
Add VLAN:
ip link add link swp1 name swp1.100 type vlan protocol 802.1ad id 100
Delete VLAN:
ip link del link swp1 name swp1.100
Signed-off-by: hongbo.wang <hongbo.wang@....com>
---
include/net/switchdev.h | 1 +
net/dsa/dsa_priv.h | 4 ++--
net/dsa/port.c | 6 ++++--
net/dsa/slave.c | 27 +++++++++++++++++++++------
net/dsa/tag_8021q.c | 4 ++--
5 files changed, 30 insertions(+), 12 deletions(-)
diff --git a/include/net/switchdev.h b/include/net/switchdev.h
index ff2246914301..7594ea82879f 100644
--- a/include/net/switchdev.h
+++ b/include/net/switchdev.h
@@ -97,6 +97,7 @@ struct switchdev_obj_port_vlan {
u16 flags;
u16 vid_begin;
u16 vid_end;
+ u16 proto;
};
#define SWITCHDEV_OBJ_PORT_VLAN(OBJ) \
diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
index 1653e3377cb3..52685b9875e5 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -164,8 +164,8 @@ int dsa_port_vlan_add(struct dsa_port *dp,
struct switchdev_trans *trans);
int dsa_port_vlan_del(struct dsa_port *dp,
const struct switchdev_obj_port_vlan *vlan);
-int dsa_port_vid_add(struct dsa_port *dp, u16 vid, u16 flags);
-int dsa_port_vid_del(struct dsa_port *dp, u16 vid);
+int dsa_port_vid_add(struct dsa_port *dp, u16 vid, u16 proto, u16 flags);
+int dsa_port_vid_del(struct dsa_port *dp, u16 vid, u16 proto);
int dsa_port_link_register_of(struct dsa_port *dp);
void dsa_port_link_unregister_of(struct dsa_port *dp);
extern const struct phylink_mac_ops dsa_port_phylink_mac_ops;
diff --git a/net/dsa/port.c b/net/dsa/port.c
index e23ece229c7e..c98bbac3980a 100644
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
@@ -433,13 +433,14 @@ int dsa_port_vlan_del(struct dsa_port *dp,
return dsa_port_notify(dp, DSA_NOTIFIER_VLAN_DEL, &info);
}
-int dsa_port_vid_add(struct dsa_port *dp, u16 vid, u16 flags)
+int dsa_port_vid_add(struct dsa_port *dp, u16 vid, u16 proto, u16 flags)
{
struct switchdev_obj_port_vlan vlan = {
.obj.id = SWITCHDEV_OBJ_ID_PORT_VLAN,
.flags = flags,
.vid_begin = vid,
.vid_end = vid,
+ .proto = proto,
};
struct switchdev_trans trans;
int err;
@@ -454,12 +455,13 @@ int dsa_port_vid_add(struct dsa_port *dp, u16 vid, u16 flags)
}
EXPORT_SYMBOL(dsa_port_vid_add);
-int dsa_port_vid_del(struct dsa_port *dp, u16 vid)
+int dsa_port_vid_del(struct dsa_port *dp, u16 vid, u16 proto)
{
struct switchdev_obj_port_vlan vlan = {
.obj.id = SWITCHDEV_OBJ_ID_PORT_VLAN,
.vid_begin = vid,
.vid_end = vid,
+ .proto = proto,
};
return dsa_port_vlan_del(dp, &vlan);
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 41d60eeefdbd..2a03da92af0a 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1233,7 +1233,10 @@ static int dsa_slave_vlan_rx_add_vid(struct net_device *dev, __be16 proto,
u16 vid)
{
struct dsa_port *dp = dsa_slave_to_port(dev);
+ u16 vlan_proto = ntohs(proto);
struct bridge_vlan_info info;
+ bool change_proto = false;
+ u16 br_proto = 0;
int ret;
/* Check for a possible bridge VLAN entry now since there is no
@@ -1243,20 +1246,24 @@ static int dsa_slave_vlan_rx_add_vid(struct net_device *dev, __be16 proto,
if (dsa_port_skip_vlan_configuration(dp))
return 0;
+ ret = br_vlan_get_proto(dp->bridge_dev, &br_proto);
+ if (ret == 0 && br_proto != vlan_proto)
+ change_proto = true;
+
/* br_vlan_get_info() returns -EINVAL or -ENOENT if the
* device, respectively the VID is not found, returning
* 0 means success, which is a failure for us here.
*/
ret = br_vlan_get_info(dp->bridge_dev, vid, &info);
- if (ret == 0)
+ if (ret == 0 && !change_proto)
return -EBUSY;
}
- ret = dsa_port_vid_add(dp, vid, 0);
+ ret = dsa_port_vid_add(dp, vid, vlan_proto, 0);
if (ret)
return ret;
- ret = dsa_port_vid_add(dp->cpu_dp, vid, 0);
+ ret = dsa_port_vid_add(dp->cpu_dp, vid, 0, 0);
if (ret)
return ret;
@@ -1267,7 +1274,10 @@ static int dsa_slave_vlan_rx_kill_vid(struct net_device *dev, __be16 proto,
u16 vid)
{
struct dsa_port *dp = dsa_slave_to_port(dev);
+ u16 vlan_proto = ntohs(proto);
struct bridge_vlan_info info;
+ bool change_proto = false;
+ u16 br_proto = 0;
int ret;
/* Check for a possible bridge VLAN entry now since there is no
@@ -1277,19 +1287,23 @@ static int dsa_slave_vlan_rx_kill_vid(struct net_device *dev, __be16 proto,
if (dsa_port_skip_vlan_configuration(dp))
return 0;
+ ret = br_vlan_get_proto(dp->bridge_dev, &br_proto);
+ if (ret == 0 && br_proto != vlan_proto)
+ change_proto = true;
+
/* br_vlan_get_info() returns -EINVAL or -ENOENT if the
* device, respectively the VID is not found, returning
* 0 means success, which is a failure for us here.
*/
ret = br_vlan_get_info(dp->bridge_dev, vid, &info);
- if (ret == 0)
+ if (ret == 0 && !change_proto)
return -EBUSY;
}
/* Do not deprogram the CPU port as it may be shared with other user
* ports which can be members of this VLAN as well.
*/
- return dsa_port_vid_del(dp, vid);
+ return dsa_port_vid_del(dp, vid, vlan_proto);
}
struct dsa_hw_port {
@@ -1744,7 +1758,8 @@ int dsa_slave_create(struct dsa_port *port)
slave_dev->features = master->vlan_features | NETIF_F_HW_TC;
if (ds->ops->port_vlan_add && ds->ops->port_vlan_del)
- slave_dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
+ slave_dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER |
+ NETIF_F_HW_VLAN_STAG_FILTER;
slave_dev->hw_features |= NETIF_F_HW_TC;
slave_dev->features |= NETIF_F_LLTX;
slave_dev->ethtool_ops = &dsa_slave_ethtool_ops;
diff --git a/net/dsa/tag_8021q.c b/net/dsa/tag_8021q.c
index 780b2a15ac9b..848f85ed5c0f 100644
--- a/net/dsa/tag_8021q.c
+++ b/net/dsa/tag_8021q.c
@@ -152,9 +152,9 @@ static int dsa_8021q_vid_apply(struct dsa_switch *ds, int port, u16 vid,
struct dsa_port *dp = dsa_to_port(ds, port);
if (enabled)
- return dsa_port_vid_add(dp, vid, flags);
+ return dsa_port_vid_add(dp, vid, 0, flags);
- return dsa_port_vid_del(dp, vid);
+ return dsa_port_vid_del(dp, vid, 0);
}
/* RX VLAN tagging (left) and TX VLAN tagging (right) setup shown for a single
--
2.17.1
Powered by blists - more mailing lists