lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200810220645.19326-3-marek.behun@nic.cz>
Date:   Tue, 11 Aug 2020 00:06:43 +0200
From:   Marek Behún <marek.behun@....cz>
To:     Russell King <rmk+kernel@...linux.org.uk>
Cc:     Andrew Lunn <andrew@...n.ch>,
        Maxime Chevallier <maxime.chevallier@...tlin.com>,
        Baruch Siach <baruch@...s.co.il>,
        Chris Healy <cphealy@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        netdev@...r.kernel.org,
        Marek Behún <marek.behun@....cz>
Subject: [PATCH RFC russell-king 2/4] net: phy: sfp: add support for multigig RollBall modules

This adds support for multigig copper SFP modules from RollBall/Hilink.
These modules have a specific way to access clause 45 registers of the
internal PHY.

We also need to wait at least 25 seconds after deasserting TX disable
before accessing the PHY. The code waits for 30 seconds just to be sure.

Signed-off-by: Marek Behún <marek.behun@....cz>
---
 drivers/net/phy/sfp.c | 57 ++++++++++++++++++++++++++++++++++++-------
 1 file changed, 48 insertions(+), 9 deletions(-)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index a62fa2e5ae4e6..fe72282e96c7d 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -167,6 +167,7 @@ static const enum gpiod_flags gpio_flags[] = {
 #define T_WAIT			msecs_to_jiffies(50)
 #define T_START_UP		msecs_to_jiffies(300)
 #define T_START_UP_BAD_GPON	msecs_to_jiffies(60000)
+#define T_START_UP_LONG_PHY	msecs_to_jiffies(30000)
 
 /* t_reset is the time required to assert the TX_DISABLE signal to reset
  * an indicated TX_FAULT.
@@ -243,6 +244,7 @@ struct sfp {
 	struct sfp_eeprom_id id;
 	unsigned int module_power_mW;
 	unsigned int module_t_start_up;
+	bool rollball_mii;
 
 #if IS_ENABLED(CONFIG_HWMON)
 	struct sfp_diag diag;
@@ -394,9 +396,6 @@ static int sfp_i2c_write(struct sfp *sfp, bool a2, u8 dev_addr, void *buf,
 
 static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c)
 {
-	struct mii_bus *i2c_mii;
-	int ret;
-
 	if (!i2c_check_functionality(i2c, I2C_FUNC_I2C))
 		return -EINVAL;
 
@@ -404,7 +403,19 @@ static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c)
 	sfp->read = sfp_i2c_read;
 	sfp->write = sfp_i2c_write;
 
-	i2c_mii = mdio_i2c_alloc(sfp->dev, i2c);
+	return 0;
+}
+
+static int sfp_i2c_mii_probe(struct sfp *sfp)
+{
+	struct mii_bus *i2c_mii;
+	int ret;
+
+	if (sfp->rollball_mii)
+		i2c_mii = mdio_i2c_rollball_alloc(sfp->dev, sfp->i2c);
+	else
+		i2c_mii = mdio_i2c_alloc(sfp->dev, sfp->i2c);
+
 	if (IS_ERR(i2c_mii))
 		return PTR_ERR(i2c_mii);
 
@@ -422,6 +433,14 @@ static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c)
 	return 0;
 }
 
+static void sfp_i2c_mii_remove(struct sfp *sfp)
+{
+	if (sfp->i2c_mii) {
+		mdiobus_unregister(sfp->i2c_mii);
+		mdiobus_free(sfp->i2c_mii);
+	}
+}
+
 /* Interface */
 static int sfp_read(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
 {
@@ -1419,6 +1438,7 @@ static void sfp_sm_phy_detach(struct sfp *sfp)
 	phy_device_remove(sfp->mod_phy);
 	phy_device_free(sfp->mod_phy);
 	sfp->mod_phy = NULL;
+	sfp_i2c_mii_remove(sfp);
 }
 
 static int sfp_sm_probe_phy(struct sfp *sfp, bool is_c45)
@@ -1426,10 +1446,17 @@ static int sfp_sm_probe_phy(struct sfp *sfp, bool is_c45)
 	struct phy_device *phy;
 	int err;
 
+	err = sfp_i2c_mii_probe(sfp);
+	if (err)
+		return err;
+
 	phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45);
-	if (phy == ERR_PTR(-ENODEV))
+	if (phy == ERR_PTR(-ENODEV)) {
+		sfp_i2c_mii_remove(sfp);
 		return PTR_ERR(phy);
+	}
 	if (IS_ERR(phy)) {
+		sfp_i2c_mii_remove(sfp);
 		dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
 		return PTR_ERR(phy);
 	}
@@ -1437,6 +1464,7 @@ static int sfp_sm_probe_phy(struct sfp *sfp, bool is_c45)
 	err = phy_device_register(phy);
 	if (err) {
 		phy_device_free(phy);
+		sfp_i2c_mii_remove(sfp);
 		dev_err(sfp->dev, "phy_device_register failed: %d\n", err);
 		return err;
 	}
@@ -1445,6 +1473,7 @@ static int sfp_sm_probe_phy(struct sfp *sfp, bool is_c45)
 	if (err) {
 		phy_device_remove(phy);
 		phy_device_free(phy);
+		sfp_i2c_mii_remove(sfp);
 		dev_err(sfp->dev, "sfp_add_phy failed: %d\n", err);
 		return err;
 	}
@@ -1665,6 +1694,7 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
 	struct sfp_eeprom_id id;
 	bool cotsworks_sfbg;
 	bool cotsworks;
+	bool rollball;
 	u8 check;
 	int ret;
 
@@ -1730,7 +1760,17 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
 		}
 	}
 
+	rollball = (!memcmp(id.base.vendor_name, "OEM             ", 16) &&
+		    (!memcmp(id.base.vendor_pn, "SFP-10G-T       ", 16) ||
+		     !memcmp(id.base.vendor_pn, "RTSFP-10        ", 16) ||
+		     !memcmp(id.base.vendor_pn, "RTSFP-2.5G      ", 16)));
+	if (rollball) {
+		/* TODO: try to write this to EEPROM */
+		id.base.extended_cc = SFF8024_ECC_10GBASE_T_SFI;
+	}
+
 	sfp->id = id;
+	sfp->rollball_mii = rollball;
 
 	dev_info(sfp->dev, "module %.*s %.*s rev %.*s sn %.*s dc %.*s\n",
 		 (int)sizeof(id.base.vendor_name), id.base.vendor_name,
@@ -1760,6 +1800,8 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
 	if (!memcmp(id.base.vendor_name, "ALCATELLUCENT   ", 16) &&
 	    !memcmp(id.base.vendor_pn, "3FE46541AA      ", 16))
 		sfp->module_t_start_up = T_START_UP_BAD_GPON;
+	else if (rollball)
+		sfp->module_t_start_up = T_START_UP_LONG_PHY;
 	else
 		sfp->module_t_start_up = T_START_UP;
 
@@ -2264,10 +2306,7 @@ static void sfp_cleanup(void *data)
 
 	cancel_delayed_work_sync(&sfp->poll);
 	cancel_delayed_work_sync(&sfp->timeout);
-	if (sfp->i2c_mii) {
-		mdiobus_unregister(sfp->i2c_mii);
-		mdiobus_free(sfp->i2c_mii);
-	}
+	sfp_i2c_mii_remove(sfp);
 	if (sfp->i2c)
 		i2c_put_adapter(sfp->i2c);
 	kfree(sfp);
-- 
2.26.2

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ