Date:   Tue, 18 Aug 2020 15:43:05 +0200
From:   Marek Behún <marek.behun@....cz>
To:     Russell King - ARM Linux admin <linux@...linux.org.uk>
Cc:     Andrew Lunn <andrew@...n.ch>,
        Maxime Chevallier <maxime.chevallier@...tlin.com>,
        Baruch Siach <baruch@...s.co.il>,
        Chris Healy <cphealy@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>, netdev@...r.kernel.org
Subject: Re: [PATCH RFC russell-king 0/4] Support for RollBall 10G copper
 SFP modules

On Mon, 17 Aug 2020 14:49:09 +0100
Russell King - ARM Linux admin <linux@...linux.org.uk> wrote:

> On Tue, Aug 11, 2020 at 12:06:41AM +0200, Marek Behún wrote:
> > Hi Russell,
> > 
> > this series should apply on linux-arm git repository, on branch
> > clearfog.  
> 
> How about something like this - only build tested, and you may
> encounter fuzz with this:
> 
> diff --git a/drivers/net/phy/marvell10g.c
> b/drivers/net/phy/marvell10g.c index 147b4cf4188e..bcbef68e0917 100644
> --- a/drivers/net/phy/marvell10g.c
> +++ b/drivers/net/phy/marvell10g.c
> @@ -117,6 +117,7 @@ enum {
>  	MV_V2_PORT_CTRL_FT_1000BASEX = 0 << 3,
>  	MV_V2_PORT_CTRL_FT_SGMII = 1 << 3,
>  	MV_V2_PORT_CTRL_FT_10GBASER = 3 << 3,
> +	MV_V2_PORT_CTRL_MACTYPE	= 7 << 0,
>  	MV_V2_UIS		= 0xf040,
>  	MV_V2_PIS		= 0xf042,
>  	MV_V2_PIS_PI		= BIT(0),
> @@ -691,17 +692,44 @@ static bool mv3310_has_pma_ngbaset_quirk(struct
> phy_device *phydev) MV_PHY_ALASKA_NBT_QUIRK_MASK) ==
> MV_PHY_ALASKA_NBT_QUIRK_REV; }
>  
> +static int mv3310_select_mode(struct phy_device *phydev,
> +			      unsigned long *host_interfaces)
> +{
> +	int mac_type = -1;
> +
> +	if (test_bit(PHY_INTERFACE_MODE_USXGMII, host_interfaces))
> +		mac_type = 7;
> +	else if (test_bit(PHY_INTERFACE_MODE_SGMII, host_interfaces)
> &&
> +		 test_bit(PHY_INTERFACE_MODE_10GBASER,
> host_interfaces))
> +		mac_type = 4;
> +	else if (test_bit(PHY_INTERFACE_MODE_SGMII, host_interfaces)
> &&
> +		 test_bit(PHY_INTERFACE_MODE_RXAUI, host_interfaces))
> +		mac_type = 0;
> +	else if (test_bit(PHY_INTERFACE_MODE_10GBASER,
> host_interfaces))
> +		mac_type = 6;
> +	else if (test_bit(PHY_INTERFACE_MODE_RXAUI, host_interfaces))
> +		mac_type = 2;
> +	else if (test_bit(PHY_INTERFACE_MODE_SGMII, host_interfaces))
> +		mac_type = 4;
> +
> +	return mac_type;
> +}
> +
>  static int mv3310_config_init(struct phy_device *phydev)
>  {
> -	int err;
> +	int ret, err, mac_type = -1;
>  
>  	/* Check that the PHY interface type is compatible */
> -	if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
> -	    phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
> -	    phydev->interface != PHY_INTERFACE_MODE_XAUI &&
> -	    phydev->interface != PHY_INTERFACE_MODE_RXAUI &&
> -	    phydev->interface != PHY_INTERFACE_MODE_10GBASER)
> +	if (!phy_interface_empty(phydev->host_interfaces)) {
> +		mac_type = mv3310_select_mode(phydev,
> phydev->host_interfaces);
> +		phydev_info(phydev, "mac_type=%d\n", mac_type);
> +	} else if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
> +		   phydev->interface != PHY_INTERFACE_MODE_2500BASEX
> &&
> +		   phydev->interface != PHY_INTERFACE_MODE_XAUI &&
> +		   phydev->interface != PHY_INTERFACE_MODE_RXAUI &&
> +		   phydev->interface != PHY_INTERFACE_MODE_10GBASER)
> { return -ENODEV;
> +	}
>  
>  	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
>  
> @@ -710,6 +738,20 @@ static int mv3310_config_init(struct phy_device
> *phydev) if (err)
>  		return err;
>  
> +	if (mac_type != -1) {
> +		ret = phy_modify_mmd_changed(phydev, MDIO_MMD_VEND2,
> +					     MV_V2_PORT_CTRL,
> +
> MV_V2_PORT_CTRL_MACTYPE, mac_type);
> +		if (ret > 0)
> +			ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2,
> +					     MV_V2_PORT_CTRL,
> +					     MV_V2_PORT_CTRL_SWRST,
> +					     MV_V2_PORT_CTRL_SWRST);

When chaning mactype you also have to issue SWRST in the same register
write. Otherwise it did not work for me.

> +
> +		if (ret < 0)
> +			return ret;
> +	}
> +
>  	/* Enable EDPD mode - saving 600mW */
>  	err = mv3310_set_edpd(phydev,
> ETHTOOL_PHY_EDPD_DFLT_TX_MSECS); if (err)
> diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
> index 5785eb040f11..4ad64973432a 100644
> --- a/drivers/net/phy/phylink.c
> +++ b/drivers/net/phy/phylink.c
> @@ -2082,6 +2082,8 @@ static void phylink_sfp_detach(void *upstream,
> struct sfp_bus *bus) sfp_bus_unlink_netdev(bus, pl->netdev);
>  }
>  
> +static DECLARE_PHY_INTERFACE_MASK(phylink_sfp_interfaces);
> +
>  static const phy_interface_t phylink_sfp_interface_preference[] = {
>  	PHY_INTERFACE_MODE_USXGMII,
>  	PHY_INTERFACE_MODE_10GBASER,
> @@ -2091,6 +2093,18 @@ static const phy_interface_t
> phylink_sfp_interface_preference[] = { PHY_INTERFACE_MODE_1000BASEX,
>  };
>  
> +static int __init phylink_init(void)
> +{
> +	int i;
> +
> +	for (i = 0; i <
> ARRAY_SIZE(phylink_sfp_interface_preference); i++)
> +		set_bit(phylink_sfp_interface_preference[i],
> +			phylink_sfp_interfaces);
> +
> +	return 0;
> +}
> +module_init(phylink_init);
> +
>  static phy_interface_t phylink_select_interface(struct phylink *pl,
>  						const unsigned long
> *intf, const char *intf_name)
> @@ -2342,6 +2356,10 @@ static int phylink_sfp_connect_phy(void
> *upstream, struct phy_device *phy) else
>  		mode = MLO_AN_INBAND;
>  
> +	/* Set the PHY's host supported interfaces */
> +	phy_interface_and(phy->host_interfaces,
> phylink_sfp_interfaces,
> +			  pl->config->supported_interfaces);
> +
>  	if (!phy_interface_empty(phy->supported_interfaces) &&
>  	    !phy_interface_empty(pl->config->supported_interfaces)) {
>  		interface = phylink_select_interface(pl,
> diff --git a/include/linux/phy.h b/include/linux/phy.h
> index 7408e2240c1e..14f73378f4e9 100644
> --- a/include/linux/phy.h
> +++ b/include/linux/phy.h
> @@ -527,6 +527,7 @@ struct phy_device {
>  
>  	/* bitmap of supported interfaces */
>  	DECLARE_PHY_INTERFACE_MASK(supported_interfaces);
> +	DECLARE_PHY_INTERFACE_MASK(host_interfaces);
>  
>  	/* Energy efficient ethernet modes which should be
> prohibited */ u32 eee_broken_modes;
> 

Otherwise it looks nice. I will test this. On what branch does this
apply?

Marek

Powered by blists - more mailing lists