| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200818213356.2629020-7-andriin@fb.com>
Date: Tue, 18 Aug 2020 14:33:55 -0700
From: Andrii Nakryiko <andriin@...com>
To: <bpf@...r.kernel.org>, <netdev@...r.kernel.org>, <ast@...com>,
<daniel@...earbox.net>
CC: <andrii.nakryiko@...il.com>, <kernel-team@...com>,
Andrii Nakryiko <andriin@...com>,
Ilya Leoshkevich <iii@...ux.ibm.com>
Subject: [PATCH bpf-next 6/7] libbpf: switch tracing and CO-RE helper macros to bpf_probe_read_kernel()
Now that libbpf can automatically fallback to bpf_probe_read() on old kernels
not yet supporting bpf_probe_read_kernel(), switch libbpf BPF-side helper
macros to use appropriate BPF helper for reading kernel data.
Cc: Ilya Leoshkevich <iii@...ux.ibm.com>
Signed-off-by: Andrii Nakryiko <andriin@...com>
---
tools/lib/bpf/bpf_core_read.h | 40 +++++++++++++++++++----------------
tools/lib/bpf/bpf_tracing.h | 4 ++--
2 files changed, 24 insertions(+), 20 deletions(-)
diff --git a/tools/lib/bpf/bpf_core_read.h b/tools/lib/bpf/bpf_core_read.h
index eae5cccff761..03152cb143b7 100644
--- a/tools/lib/bpf/bpf_core_read.h
+++ b/tools/lib/bpf/bpf_core_read.h
@@ -24,27 +24,29 @@ enum bpf_field_info_kind {
#if __BYTE_ORDER == __LITTLE_ENDIAN
#define __CORE_BITFIELD_PROBE_READ(dst, src, fld) \
- bpf_probe_read((void *)dst, \
- __CORE_RELO(src, fld, BYTE_SIZE), \
- (const void *)src + __CORE_RELO(src, fld, BYTE_OFFSET))
+ bpf_probe_read_kernel( \
+ (void *)dst, \
+ __CORE_RELO(src, fld, BYTE_SIZE), \
+ (const void *)src + __CORE_RELO(src, fld, BYTE_OFFSET))
#else
/* semantics of LSHIFT_64 assumes loading values into low-ordered bytes, so
* for big-endian we need to adjust destination pointer accordingly, based on
* field byte size
*/
#define __CORE_BITFIELD_PROBE_READ(dst, src, fld) \
- bpf_probe_read((void *)dst + (8 - __CORE_RELO(src, fld, BYTE_SIZE)), \
- __CORE_RELO(src, fld, BYTE_SIZE), \
- (const void *)src + __CORE_RELO(src, fld, BYTE_OFFSET))
+ bpf_probe_read_kernel( \
+ (void *)dst + (8 - __CORE_RELO(src, fld, BYTE_SIZE)), \
+ __CORE_RELO(src, fld, BYTE_SIZE), \
+ (const void *)src + __CORE_RELO(src, fld, BYTE_OFFSET))
#endif
/*
* Extract bitfield, identified by s->field, and return its value as u64.
* All this is done in relocatable manner, so bitfield changes such as
* signedness, bit size, offset changes, this will be handled automatically.
- * This version of macro is using bpf_probe_read() to read underlying integer
- * storage. Macro functions as an expression and its return type is
- * bpf_probe_read()'s return value: 0, on success, <0 on error.
+ * This version of macro is using bpf_probe_read_kernel() to read underlying
+ * integer storage. Macro functions as an expression and its return type is
+ * bpf_probe_read_kernel()'s return value: 0, on success, <0 on error.
*/
#define BPF_CORE_READ_BITFIELD_PROBED(s, field) ({ \
unsigned long long val = 0; \
@@ -99,8 +101,8 @@ enum bpf_field_info_kind {
__builtin_preserve_field_info(field, BPF_FIELD_BYTE_SIZE)
/*
- * bpf_core_read() abstracts away bpf_probe_read() call and captures offset
- * relocation for source address using __builtin_preserve_access_index()
+ * bpf_core_read() abstracts away bpf_probe_read_kernel() call and captures
+ * offset relocation for source address using __builtin_preserve_access_index()
* built-in, provided by Clang.
*
* __builtin_preserve_access_index() takes as an argument an expression of
@@ -115,8 +117,8 @@ enum bpf_field_info_kind {
* (local) BTF, used to record relocation.
*/
#define bpf_core_read(dst, sz, src) \
- bpf_probe_read(dst, sz, \
- (const void *)__builtin_preserve_access_index(src))
+ bpf_probe_read_kernel(dst, sz, \
+ (const void *)__builtin_preserve_access_index(src))
/*
* bpf_core_read_str() is a thin wrapper around bpf_probe_read_str()
@@ -124,8 +126,8 @@ enum bpf_field_info_kind {
* argument.
*/
#define bpf_core_read_str(dst, sz, src) \
- bpf_probe_read_str(dst, sz, \
- (const void *)__builtin_preserve_access_index(src))
+ bpf_probe_read_kernel_str(dst, sz, \
+ (const void *)__builtin_preserve_access_index(src))
#define ___concat(a, b) a ## b
#define ___apply(fn, n) ___concat(fn, n)
@@ -239,15 +241,17 @@ enum bpf_field_info_kind {
* int x = BPF_CORE_READ(s, a.b.c, d.e, f, g);
*
* BPF_CORE_READ will decompose above statement into 4 bpf_core_read (BPF
- * CO-RE relocatable bpf_probe_read() wrapper) calls, logically equivalent to:
+ * CO-RE relocatable bpf_probe_read_kernel() wrapper) calls, logically
+ * equivalent to:
* 1. const void *__t = s->a.b.c;
* 2. __t = __t->d.e;
* 3. __t = __t->f;
* 4. return __t->g;
*
* Equivalence is logical, because there is a heavy type casting/preservation
- * involved, as well as all the reads are happening through bpf_probe_read()
- * calls using __builtin_preserve_access_index() to emit CO-RE relocations.
+ * involved, as well as all the reads are happening through
+ * bpf_probe_read_kernel() calls using __builtin_preserve_access_index() to
+ * emit CO-RE relocations.
*
* N.B. Only up to 9 "field accessors" are supported, which should be more
* than enough for any practical purpose.
diff --git a/tools/lib/bpf/bpf_tracing.h b/tools/lib/bpf/bpf_tracing.h
index eebf020cbe3e..f9ef37707888 100644
--- a/tools/lib/bpf/bpf_tracing.h
+++ b/tools/lib/bpf/bpf_tracing.h
@@ -289,9 +289,9 @@ struct pt_regs;
#define BPF_KRETPROBE_READ_RET_IP BPF_KPROBE_READ_RET_IP
#else
#define BPF_KPROBE_READ_RET_IP(ip, ctx) \
- ({ bpf_probe_read(&(ip), sizeof(ip), (void *)PT_REGS_RET(ctx)); })
+ ({ bpf_probe_read_kernel(&(ip), sizeof(ip), (void *)PT_REGS_RET(ctx)); })
#define BPF_KRETPROBE_READ_RET_IP(ip, ctx) \
- ({ bpf_probe_read(&(ip), sizeof(ip), \
+ ({ bpf_probe_read_kernel(&(ip), sizeof(ip), \
(void *)(PT_REGS_FP(ctx) + sizeof(ip))); })
#endif
--
2.24.1
Powered by blists - more mailing lists