[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1597917724-11127-1-git-send-email-madalin.bucur@oss.nxp.com>
Date: Thu, 20 Aug 2020 13:02:04 +0300
From: Madalin Bucur <madalin.bucur@....nxp.com>
To: davem@...emloft.net, netdev@...r.kernel.org
Cc: kuba@...nel.org, robh+dt@...nel.org, devicetree@...r.kernel.org,
Madalin Bucur <madalin.bucur@....nxp.com>
Subject: [PATCH] dt-bindings: net: correct description of phy-connection-type
The phy-connection-type parameter is described in ePAPR 1.1:
Specifies interface type between the Ethernet device and a physical
layer (PHY) device. The value of this property is specific to the
implementation.
Signed-off-by: Madalin Bucur <madalin.bucur@....nxp.com>
---
Documentation/devicetree/bindings/net/ethernet-controller.yaml | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index 1c4474036d46..fa2baca8c726 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -54,7 +54,8 @@ properties:
phy-connection-type:
description:
- Operation mode of the PHY interface
+ Specifies interface type between the Ethernet device and a physical
+ layer (PHY) device.
enum:
# There is not a standard bus between the MAC and the PHY,
# something proprietary is being used to embed the PHY in the
--
2.1.0
Powered by blists - more mailing lists