netdev - Re: [PATCH net-next + leds v2 6/7] net: phy: marvell: add support for LEDs controlled by Marvell PHYs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 10 Sep 2020 19:34:35 +0100
From:   Russell King - ARM Linux admin <linux@...linux.org.uk>
To:     Andrew Lunn <andrew@...n.ch>
Cc:     Pavel Machek <pavel@....cz>,
        Marek Behún <marek.behun@....cz>,
        netdev@...r.kernel.org, linux-leds@...r.kernel.org,
        Dan Murphy <dmurphy@...com>,
        Ondřej Jirman <megous@...ous.com>,
        linux-kernel@...r.kernel.org,
        Matthias Schiffer <matthias.schiffer@...tq-group.com>,
        "David S. Miller" <davem@...emloft.net>
Subject: Re: [PATCH net-next + leds v2 6/7] net: phy: marvell: add support
 for LEDs controlled by Marvell PHYs

On Thu, Sep 10, 2020 at 08:31:54PM +0200, Andrew Lunn wrote:
> Generally the driver will default to the hardware reset blink
> pattern. There are a few PHY drivers which change this at probe, but
> not many. The silicon defaults are pretty good.

The "right" blink pattern can be a matter of how the hardware is
wired.  For example, if you have bi-colour LEDs and the PHY supports
special bi-colour mixing modes.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!