| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200911012337.14015-11-jesse.brandeburg@intel.com>
Date: Thu, 10 Sep 2020 18:23:36 -0700
From: Jesse Brandeburg <jesse.brandeburg@...el.com>
To: netdev@...r.kernel.org
Cc: Jesse Brandeburg <jesse.brandeburg@...el.com>,
intel-wired-lan@...ts.osuosl.org
Subject: [RFC PATCH net-next v1 10/11] drivers/net/ethernet: remove incorrectly formatted doc
As part of the W=1 series for ethernet, these drivers were discovered to
be using kdoc style comments but were not actually doing kdoc.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@...el.com>
---
drivers/net/ethernet/amazon/ena/ena_com.c | 2 +-
.../aquantia/atlantic/hw_atl/hw_atl_b0.c | 2 +-
drivers/net/ethernet/xilinx/ll_temac_main.c | 26 +++++++++----------
3 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c
index 452e66b39a17..6967d40b5ac7 100644
--- a/drivers/net/ethernet/amazon/ena/ena_com.c
+++ b/drivers/net/ethernet/amazon/ena/ena_com.c
@@ -603,7 +603,7 @@ static int ena_com_wait_and_process_admin_cq_polling(struct ena_comp_ctx *comp_c
return ret;
}
-/**
+/*
* Set the LLQ configurations of the firmware
*
* The driver provides only the enabled feature values to the device,
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
index 8941ac4df9e3..9f1b15077e7d 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
@@ -1536,7 +1536,7 @@ static int hw_atl_b0_hw_fl2_clear(struct aq_hw_s *self,
return aq_hw_err_from_flags(self);
}
-/**
+/*
* @brief Set VLAN filter table
* @details Configure VLAN filter table to accept (and assign the queue) traffic
* for the particular vlan ids.
diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
index 9a15f14daa47..60c199fcb91e 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -106,7 +106,7 @@ static bool hard_acs_rdy_or_timeout(struct temac_local *lp, ktime_t timeout)
*/
#define HARD_ACS_RDY_POLL_NS (20 * NSEC_PER_MSEC)
-/**
+/*
* temac_indirect_busywait - Wait for current indirect register access
* to complete.
*/
@@ -121,7 +121,7 @@ int temac_indirect_busywait(struct temac_local *lp)
return 0;
}
-/**
+/*
* temac_indirect_in32 - Indirect register read access. This function
* must be called without lp->indirect_lock being held.
*/
@@ -136,7 +136,7 @@ u32 temac_indirect_in32(struct temac_local *lp, int reg)
return val;
}
-/**
+/*
* temac_indirect_in32_locked - Indirect register read access. This
* function must be called with lp->indirect_lock being held. Use
* this together with spin_lock_irqsave/spin_lock_irqrestore to avoid
@@ -164,7 +164,7 @@ u32 temac_indirect_in32_locked(struct temac_local *lp, int reg)
return temac_ior(lp, XTE_LSW0_OFFSET);
}
-/**
+/*
* temac_indirect_out32 - Indirect register write access. This function
* must be called without lp->indirect_lock being held.
*/
@@ -177,7 +177,7 @@ void temac_indirect_out32(struct temac_local *lp, int reg, u32 value)
spin_unlock_irqrestore(lp->indirect_lock, flags);
}
-/**
+/*
* temac_indirect_out32_locked - Indirect register write access. This
* function must be called with lp->indirect_lock being held. Use
* this together with spin_lock_irqsave/spin_lock_irqrestore to avoid
@@ -202,7 +202,7 @@ void temac_indirect_out32_locked(struct temac_local *lp, int reg, u32 value)
WARN_ON(temac_indirect_busywait(lp));
}
-/**
+/*
* temac_dma_in32_* - Memory mapped DMA read, these function expects a
* register input that is based on DCR word addresses which are then
* converted to memory mapped byte addresses. To be assigned to
@@ -218,7 +218,7 @@ static u32 temac_dma_in32_le(struct temac_local *lp, int reg)
return ioread32(lp->sdma_regs + (reg << 2));
}
-/**
+/*
* temac_dma_out32_* - Memory mapped DMA read, these function expects
* a register input that is based on DCR word addresses which are then
* converted to memory mapped byte addresses. To be assigned to
@@ -240,7 +240,7 @@ static void temac_dma_out32_le(struct temac_local *lp, int reg, u32 value)
*/
#ifdef CONFIG_PPC_DCR
-/**
+/*
* temac_dma_dcr_in32 - DCR based DMA read
*/
static u32 temac_dma_dcr_in(struct temac_local *lp, int reg)
@@ -248,7 +248,7 @@ static u32 temac_dma_dcr_in(struct temac_local *lp, int reg)
return dcr_read(lp->sdma_dcrs, reg);
}
-/**
+/*
* temac_dma_dcr_out32 - DCR based DMA write
*/
static void temac_dma_dcr_out(struct temac_local *lp, int reg, u32 value)
@@ -256,7 +256,7 @@ static void temac_dma_dcr_out(struct temac_local *lp, int reg, u32 value)
dcr_write(lp->sdma_dcrs, reg, value);
}
-/**
+/*
* temac_dcr_setup - If the DMA is DCR based, then setup the address and
* I/O functions
*/
@@ -293,7 +293,7 @@ static int temac_dcr_setup(struct temac_local *lp, struct platform_device *op,
#endif
-/**
+/*
* temac_dma_bd_release - Release buffer descriptor rings
*/
static void temac_dma_bd_release(struct net_device *ndev)
@@ -323,7 +323,7 @@ static void temac_dma_bd_release(struct net_device *ndev)
lp->tx_bd_v, lp->tx_bd_p);
}
-/**
+/*
* temac_dma_bd_init - Setup buffer descriptor rings
*/
static int temac_dma_bd_init(struct net_device *ndev)
@@ -593,7 +593,7 @@ static struct temac_option {
{}
};
-/**
+/*
* temac_setoptions
*/
static u32 temac_setoptions(struct net_device *ndev, u32 options)
--
2.27.0
Powered by blists - more mailing lists