[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <094327efabf7dd28aa4d53f4fd6fe82b1f5e36c3.1599829696.git.landen.chao@mediatek.com>
Date: Fri, 11 Sep 2020 21:48:55 +0800
From: Landen Chao <landen.chao@...iatek.com>
To: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Sean Wang <sean.wang@...iatek.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Russell King <linux@...linux.org.uk>
CC: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <frank-w@...lic-files.de>,
<opensource@...rst.com>, <dqfext@...il.com>,
Landen Chao <landen.chao@...iatek.com>
Subject: [PATCH net-next v5 5/6] arm64: dts: mt7622: add mt7531 dsa to mt7622-rfb1 board
Add mt7531 dsa to mt7622-rfb1 board for 5 giga Ethernet ports support.
mt7622 only supports 1 sgmii interface, so either gmac0 or gmac1 can be
configured as sgmii interface. In this patch, change to connect mt7622
gmac0 and mt7531 port6 through sgmii interface.
Signed-off-by: Landen Chao <landen.chao@...iatek.com>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 63 ++++++++++++++++++--
1 file changed, 57 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 0b4de627f96e..08ad0ffb24df 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -105,20 +105,71 @@
pinctrl-0 = <ð_pins>;
status = "okay";
- gmac1: mac@1 {
+ gmac0: mac@0 {
compatible = "mediatek,eth-mac";
- reg = <1>;
- phy-handle = <&phy5>;
+ reg = <0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
};
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "sgmii";
+ switch@0 {
+ compatible = "mediatek,mt7531";
+ reg = <0>;
+ reset-gpios = <&pio 54 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
};
+
};
};
--
2.17.1
Powered by blists - more mailing lists