netdev - [PATCH v6 0/3] Add 802.1AD protocol support for dsa switch and ocelot driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200916094845.10782-1-hongbo.wang@nxp.com>
Date:   Wed, 16 Sep 2020 17:48:42 +0800
From:   hongbo.wang@....com
To:     xiaoliang.yang_1@....com, po.liu@....com, mingkai.hu@....com,
        allan.nielsen@...rochip.com, claudiu.manoil@....com,
        alexandru.marginean@....com, vladimir.oltean@....com,
        leoyang.li@....com, andrew@...n.ch, f.fainelli@...il.com,
        vivien.didelot@...il.com, davem@...emloft.net, jiri@...nulli.us,
        idosch@...sch.org, kuba@...nel.org, vinicius.gomes@...el.com,
        nikolay@...ulusnetworks.com, roopa@...ulusnetworks.com,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        horatiu.vultur@...rochip.com, alexandre.belloni@...tlin.com,
        UNGLinuxDriver@...rochip.com, ivecera@...hat.com
Cc:     "hongbo.wang" <hongbo.wang@....com>
Subject: [PATCH v6 0/3] Add 802.1AD protocol support for dsa switch and ocelot driver

From: "hongbo.wang" <hongbo.wang@....com>

1. Overview 
a) 0001* is for support to set dsa slave into 802.1AD(QinQ) mode.
b) 0002* is for vlan_proto support for br_switchdev_port_vlan_add and br_switchdev_port_vlan_del.
c) 0003* is for setting QinQ related registers in ocelot switch driver, after applying this patch, the switch(VSC99599)'s port can enable or disable QinQ mode.

2. Version log
v6:
a) put the code for switchdev into single patch
b) change code according to latest mainline

v5:
a) add devlink to enable qinq_mode of ocelot's single port 
b) modify br_switchdev_port_vlan_add to pass bridge's vlan_proto to port driver 
c) enable NETIF_F_HW_VLAN_STAG_FILTER in ocelot driver

v4:
a) modify slave.c to support "ip set br0 type bridge vlan_protocol 802.1ad"
b) modify ocelot.c, if enable QinQ, set VLAN_AWARE_ENA and VLAN_POP_CNT per
   port when vlan_filter=1

v3: combine two patches to one post

hongbo.wang (3):
  net: dsa: Add protocol support for 802.1AD when adding or deleting
    vlan for dsa switch port
  net: switchdev: Add VLAN protocol support for switchdev port
  net: dsa: ocelot: Add support for QinQ Operation

 drivers/net/dsa/ocelot/felix.c     | 123 +++++++++++++++++++++++++++++
 drivers/net/ethernet/mscc/ocelot.c |  39 +++++++--
 include/net/switchdev.h            |   1 +
 include/soc/mscc/ocelot.h          |   4 +
 net/bridge/br_switchdev.c          |  24 ++++++
 net/dsa/slave.c                    |  51 ++++++++----
 6 files changed, 221 insertions(+), 21 deletions(-)

-- 
2.17.1