| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200917135707.12563-6-geert+renesas@glider.be>
Date: Thu, 17 Sep 2020 15:57:07 +0200
From: Geert Uytterhoeven <geert+renesas@...der.be>
To: "David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>
Cc: Rob Herring <robh+dt@...nel.org>,
Sergei Shtylyov <sergei.shtylyov@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Oleksij Rempel <linux@...pel-privat.de>,
Philippe Schenker <philippe.schenker@...adex.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Dan Murphy <dmurphy@...com>,
Kazuya Mizuguchi <kazuya.mizuguchi.ks@...esas.com>,
Wolfram Sang <wsa+renesas@...g-engineering.com>,
Magnus Damm <magnus.damm@...il.com>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
linux-kernel@...r.kernel.org,
Geert Uytterhoeven <geert+renesas@...der.be>
Subject: [PATCH net-next v4 5/5] ravb: Add support for explicit internal clock delay configuration
Some EtherAVB variants support internal clock delay configuration, which
can add larger delays than the delays that are typically supported by
the PHY (using an "rgmii-*id" PHY mode, and/or "[rt]xc-skew-ps"
properties).
Historically, the EtherAVB driver configured these delays based on the
"rgmii-*id" PHY mode. This caused issues with PHY drivers that
implement PHY internal delays properly[1]. Hence a backwards-compatible
workaround was added by masking the PHY mode[2].
Add proper support for explicit configuration of the MAC internal clock
delays using the new "[rt]x-internal-delay-ps" properties.
Fall back to the old handling if none of these properties is present.
[1] Commit bcf3440c6dd78bfe ("net: phy: micrel: add phy-mode support for
the KSZ9031 PHY")
[2] Commit 9b23203c32ee02cd ("ravb: Mask PHY mode to avoid inserting
delays twice").
Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
---
v4:
- Add Reviewed-by,
v3:
- No changes,
v2:
- Add Reviewed-by,
- Split long line,
- Replace "renesas,[rt]xc-delay-ps" by "[rt]x-internal-delay-ps",
- Use 1 instead of true when assigning to a single-bit bitfield.
---
drivers/net/ethernet/renesas/ravb.h | 1 +
drivers/net/ethernet/renesas/ravb_main.c | 36 ++++++++++++++++++------
2 files changed, 28 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/renesas/ravb.h b/drivers/net/ethernet/renesas/ravb.h
index e5ca12ce93c730a9..7453b17a37a2c8d0 100644
--- a/drivers/net/ethernet/renesas/ravb.h
+++ b/drivers/net/ethernet/renesas/ravb.h
@@ -1038,6 +1038,7 @@ struct ravb_private {
unsigned wol_enabled:1;
unsigned rxcidm:1; /* RX Clock Internal Delay Mode */
unsigned txcidm:1; /* TX Clock Internal Delay Mode */
+ unsigned rgmii_override:1; /* Deprecated rgmii-*id behavior */
int num_tx_desc; /* TX descriptors per packet */
};
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 59dadd971345e0d1..aa120e3f1e4d4da5 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -1034,11 +1034,8 @@ static int ravb_phy_init(struct net_device *ndev)
pn = of_node_get(np);
}
- iface = priv->phy_interface;
- if (priv->chip_id != RCAR_GEN2 && phy_interface_mode_is_rgmii(iface)) {
- /* ravb_set_delay_mode() takes care of internal delay mode */
- iface = PHY_INTERFACE_MODE_RGMII;
- }
+ iface = priv->rgmii_override ? PHY_INTERFACE_MODE_RGMII
+ : priv->phy_interface;
phydev = of_phy_connect(ndev, pn, ravb_adjust_link, 0, iface);
of_node_put(pn);
if (!phydev) {
@@ -1989,20 +1986,41 @@ static const struct soc_device_attribute ravb_delay_mode_quirk_match[] = {
};
/* Set tx and rx clock internal delay modes */
-static void ravb_parse_delay_mode(struct net_device *ndev)
+static void ravb_parse_delay_mode(struct device_node *np, struct net_device *ndev)
{
struct ravb_private *priv = netdev_priv(ndev);
+ bool explicit_delay = false;
+ u32 delay;
+
+ if (!of_property_read_u32(np, "rx-internal-delay-ps", &delay)) {
+ /* Valid values are 0 and 1800, according to DT bindings */
+ priv->rxcidm = !!delay;
+ explicit_delay = true;
+ }
+ if (!of_property_read_u32(np, "tx-internal-delay-ps", &delay)) {
+ /* Valid values are 0 and 2000, according to DT bindings */
+ priv->txcidm = !!delay;
+ explicit_delay = true;
+ }
+ if (explicit_delay)
+ return;
+
+ /* Fall back to legacy rgmii-*id behavior */
if (priv->phy_interface == PHY_INTERFACE_MODE_RGMII_ID ||
- priv->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ priv->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID) {
priv->rxcidm = 1;
+ priv->rgmii_override = 1;
+ }
if (priv->phy_interface == PHY_INTERFACE_MODE_RGMII_ID ||
priv->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) {
if (!WARN(soc_device_match(ravb_delay_mode_quirk_match),
"phy-mode %s requires TX clock internal delay mode which is not supported by this hardware revision. Please update device tree",
- phy_modes(priv->phy_interface)))
+ phy_modes(priv->phy_interface))) {
priv->txcidm = 1;
+ priv->rgmii_override = 1;
+ }
}
}
@@ -2148,7 +2166,7 @@ static int ravb_probe(struct platform_device *pdev)
ravb_modify(ndev, GCCR, GCCR_LTI, GCCR_LTI);
if (priv->chip_id != RCAR_GEN2) {
- ravb_parse_delay_mode(ndev);
+ ravb_parse_delay_mode(np, ndev);
ravb_set_delay_mode(ndev);
}
--
2.17.1
Powered by blists - more mailing lists