Date:   Sun, 20 Sep 2020 08:14:11 +0200
From:   Marcel Holtmann <marcel@...tmann.org>
To:     Howard Chung <howardchung@...gle.com>
Cc:     linux-bluetooth <linux-bluetooth@...r.kernel.org>,
        Luiz Augusto von Dentz <luiz.dentz@...il.com>,
        mcchou@...omium.org, mmandlik@...omium.org, alainm@...omium.org,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Johan Hedberg <johan.hedberg@...il.com>,
        linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Subject: Re: [PATCH v3 3/6] Bluetooth: Interleave with allowlist scan

Hi Howard,

> This patch implements the interleaving between allowlist scan and
> no-filter scan. It'll be used to save power when at least one monitor is
> registered and at least one pending connection or one device to be
> scanned for.
> 
> The durations of the allowlist scan and the no-filter scan are
> controlled by MGMT command: Set Default System Configuration. The
> default values are set randomly for now.
> 
> Signed-off-by: Howard Chung <howardchung@...gle.com>
> Reviewed-by: Alain Michaud <alainm@...omium.org>
> Reviewed-by: Manish Mandlik <mmandlik@...omium.org>
> ---
> 
> (no changes since v2)
> 
> Changes in v2:
> - remove 'case 0x001c' in mgmt_config.c
> 
> include/net/bluetooth/hci_core.h |  10 +++
> net/bluetooth/hci_core.c         |   4 +
> net/bluetooth/hci_request.c      | 137 +++++++++++++++++++++++++++++--
> net/bluetooth/mgmt_config.c      |  12 +++
> 4 files changed, 155 insertions(+), 8 deletions(-)
> 
> diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
> index 9873e1c8cd163..179350f869fdb 100644
> --- a/include/net/bluetooth/hci_core.h
> +++ b/include/net/bluetooth/hci_core.h
> @@ -361,6 +361,8 @@ struct hci_dev {
> 	__u8		ssp_debug_mode;
> 	__u8		hw_error_code;
> 	__u32		clock;
> +	__u16		advmon_allowlist_duration;
> +	__u16		advmon_no_filter_duration;
> 
> 	__u16		devid_source;
> 	__u16		devid_vendor;
> @@ -542,6 +544,14 @@ struct hci_dev {
> 	struct delayed_work	rpa_expired;
> 	bdaddr_t		rpa;
> 
> +	enum {
> +		ADV_MONITOR_SCAN_NONE,
> +		ADV_MONITOR_SCAN_NO_FILTER,
> +		ADV_MONITOR_SCAN_ALLOWLIST
> +	} adv_monitor_scan_state;
> +
> +	struct delayed_work	interleave_adv_monitor_scan;
> +
> #if IS_ENABLED(CONFIG_BT_LEDS)
> 	struct led_trigger	*power_led;
> #endif
> diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
> index f30a1f5950e15..6c8850149265a 100644
> --- a/net/bluetooth/hci_core.c
> +++ b/net/bluetooth/hci_core.c
> @@ -3592,6 +3592,10 @@ struct hci_dev *hci_alloc_dev(void)
> 	hdev->cur_adv_instance = 0x00;
> 	hdev->adv_instance_timeout = 0;
> 
> +	/* The default values will be chosen in the future */
> +	hdev->advmon_allowlist_duration = 300;
> +	hdev->advmon_no_filter_duration = 500;
> +
> 	hdev->sniff_max_interval = 800;
> 	hdev->sniff_min_interval = 80;
> 
> diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
> index d2b06f5c93804..89443b48d90ce 100644
> --- a/net/bluetooth/hci_request.c
> +++ b/net/bluetooth/hci_request.c
> @@ -378,6 +378,57 @@ void __hci_req_write_fast_connectable(struct hci_request *req, bool enable)
> 		hci_req_add(req, HCI_OP_WRITE_PAGE_SCAN_TYPE, 1, &type);
> }
> 
> +static void start_interleave_scan(struct hci_dev *hdev)
> +{
> +	hdev->adv_monitor_scan_state = ADV_MONITOR_SCAN_NO_FILTER;
> +	queue_delayed_work(hdev->req_workqueue,
> +			   &hdev->interleave_adv_monitor_scan, 0);
> +}
> +
> +static bool is_interleave_scanning(struct hci_dev *hdev)
> +{
> +	return hdev->adv_monitor_scan_state != ADV_MONITOR_SCAN_NONE;
> +}
> +
> +static void cancel_interleave_scan(struct hci_dev *hdev)
> +{
> +	bt_dev_dbg(hdev, "%s cancelling interleave scan", hdev->name);
> +
> +	cancel_delayed_work_sync(&hdev->interleave_adv_monitor_scan);
> +
> +	hdev->adv_monitor_scan_state = ADV_MONITOR_SCAN_NONE;
> +}
> +
> +/* Return true if interleave_scan is running after exiting this function,
> + * otherwise, return false
> + */
> +static bool update_adv_monitor_scan_state(struct hci_dev *hdev)
> +{
> +	if (!hci_is_adv_monitoring(hdev) ||
> +	    (list_empty(&hdev->pend_le_conns) &&
> +	     list_empty(&hdev->pend_le_reports))) {
> +		if (is_interleave_scanning(hdev)) {
> +			/* If the interleave condition no longer holds, cancel
> +			 * the existed interleave scan.
> +			 */
> +			cancel_interleave_scan(hdev);
> +		}
> +		return false;
> +	}
> +
> +	if (!is_interleave_scanning(hdev)) {
> +		/* If there is at least one ADV monitors and one pending LE
> +		 * connection or one device to be scanned for, we should
> +		 * alternate between allowlist scan and one without any filters
> +		 * to save power.
> +		 */
> +		start_interleave_scan(hdev);
> +		bt_dev_dbg(hdev, "%s starting interleave scan", hdev->name);
> +	}
> +
> +	return true;
> +}
> +
> /* This function controls the background scanning based on hdev->pend_le_conns
>  * list. If there are pending LE connection we start the background scanning,
>  * otherwise we stop it.
> @@ -449,9 +500,11 @@ static void __hci_update_background_scan(struct hci_request *req)
> 		if (hci_dev_test_flag(hdev, HCI_LE_SCAN))
> 			hci_req_add_le_scan_disable(req, false);
> 
> -		hci_req_add_le_passive_scan(req);
> -
> -		BT_DBG("%s starting background scanning", hdev->name);
> +		if (!update_adv_monitor_scan_state(hdev)) {
> +			hci_req_add_le_passive_scan(req);
> +			bt_dev_dbg(hdev, "%s starting background scanning",
> +				   hdev->name);
> +		}
> 	}
> }
> 
> @@ -844,12 +897,17 @@ static u8 update_white_list(struct hci_request *req)
> 			return 0x00;
> 	}
> 
> -	/* Once the controller offloading of advertisement monitor is in place,
> -	 * the if condition should include the support of MSFT extension
> -	 * support. If suspend is ongoing, whitelist should be the default to
> -	 * prevent waking by random advertisements.
> +	/* Use the allowlist unless the following conditions are all true:
> +	 * - We are not currently suspending
> +	 * - There are 1 or more ADV monitors registered
> +	 * - Interleaved scanning is not currently using the allowlist
> +	 *
> +	 * Once the controller offloading of advertisement monitor is in place,
> +	 * the above condition should include the support of MSFT extension
> +	 * support.
> 	 */
> -	if (!idr_is_empty(&hdev->adv_monitors_idr) && !hdev->suspended)
> +	if (!idr_is_empty(&hdev->adv_monitors_idr) && !hdev->suspended &&
> +	    hdev->adv_monitor_scan_state != ADV_MONITOR_SCAN_ALLOWLIST)
> 		return 0x00;
> 
> 	/* Select filter policy to use white list */
> @@ -1002,6 +1060,7 @@ void hci_req_add_le_passive_scan(struct hci_request *req)
> 				      &own_addr_type))
> 		return;
> 
> +	bt_dev_dbg(hdev, "interleave state %d", hdev->adv_monitor_scan_state);
> 	/* Adding or removing entries from the white list must
> 	 * happen before enabling scanning. The controller does
> 	 * not allow white list modification while scanning.
> @@ -1871,6 +1930,64 @@ static void adv_timeout_expire(struct work_struct *work)
> 	hci_dev_unlock(hdev);
> }
> 
> +static int add_le_interleave_adv_monitor_scan(struct hci_request *req,
> +					      unsigned long opt)
> +{
> +	struct hci_dev *hdev = req->hdev;
> +	int ret = 0;
> +
> +	hci_dev_lock(hdev);
> +
> +	if (hci_dev_test_flag(hdev, HCI_LE_SCAN))
> +		hci_req_add_le_scan_disable(req, false);
> +	hci_req_add_le_passive_scan(req);
> +
> +	switch (hdev->adv_monitor_scan_state) {
> +	case ADV_MONITOR_SCAN_ALLOWLIST:
> +		bt_dev_dbg(hdev, "next state: allowlist");
> +		hdev->adv_monitor_scan_state = ADV_MONITOR_SCAN_NO_FILTER;
> +		break;
> +	case ADV_MONITOR_SCAN_NO_FILTER:
> +		bt_dev_dbg(hdev, "next state: no filter");
> +		hdev->adv_monitor_scan_state = ADV_MONITOR_SCAN_ALLOWLIST;
> +		break;
> +	case ADV_MONITOR_SCAN_NONE:
> +	default:
> +		BT_ERR("unexpected error");
> +		ret = -1;
> +	}
> +
> +	hci_dev_unlock(hdev);
> +
> +	return ret;
> +}
> +
> +static void interleave_adv_monitor_scan_work(struct work_struct *work)
> +{
> +	struct hci_dev *hdev = container_of(work, struct hci_dev,
> +					    interleave_adv_monitor_scan.work);
> +	u8 status;
> +	unsigned long timeout;
> +
> +	if (hdev->adv_monitor_scan_state == ADV_MONITOR_SCAN_ALLOWLIST) {
> +		timeout = msecs_to_jiffies(hdev->advmon_allowlist_duration);
> +	} else if (hdev->adv_monitor_scan_state == ADV_MONITOR_SCAN_NO_FILTER) {
> +		timeout = msecs_to_jiffies(hdev->advmon_no_filter_duration);
> +	} else {
> +		bt_dev_err(hdev, "unexpected error");
> +		return;
> +	}
> +
> +	hci_req_sync(hdev, add_le_interleave_adv_monitor_scan, 0,
> +		     HCI_CMD_TIMEOUT, &status);
> +
> +	/* Don't continue interleaving if it was canceled */
> +	if (is_interleave_scanning(hdev)) {
> +		queue_delayed_work(hdev->req_workqueue,
> +				   &hdev->interleave_adv_monitor_scan, timeout);
> +	}
> +}
> +
> int hci_get_random_address(struct hci_dev *hdev, bool require_privacy,
> 			   bool use_rpa, struct adv_info *adv_instance,
> 			   u8 *own_addr_type, bdaddr_t *rand_addr)
> @@ -3292,6 +3409,8 @@ void hci_request_setup(struct hci_dev *hdev)
> 	INIT_DELAYED_WORK(&hdev->le_scan_disable, le_scan_disable_work);
> 	INIT_DELAYED_WORK(&hdev->le_scan_restart, le_scan_restart_work);
> 	INIT_DELAYED_WORK(&hdev->adv_instance_expire, adv_timeout_expire);
> +	INIT_DELAYED_WORK(&hdev->interleave_adv_monitor_scan,
> +			  interleave_adv_monitor_scan_work);
> }
> 
> void hci_request_cancel_all(struct hci_dev *hdev)
> @@ -3311,4 +3430,6 @@ void hci_request_cancel_all(struct hci_dev *hdev)
> 		cancel_delayed_work_sync(&hdev->adv_instance_expire);
> 		hdev->adv_instance_timeout = 0;
> 	}
> +
> +	cancel_interleave_scan(hdev);
> }
> diff --git a/net/bluetooth/mgmt_config.c b/net/bluetooth/mgmt_config.c
> index b30b571f8caf8..1802f7023158c 100644
> --- a/net/bluetooth/mgmt_config.c
> +++ b/net/bluetooth/mgmt_config.c
> @@ -67,6 +67,8 @@ int read_def_system_config(struct sock *sk, struct hci_dev *hdev, void *data,
> 		HDEV_PARAM_U16(0x001a, le_supv_timeout),
> 		HDEV_PARAM_U16_JIFFIES_TO_MSECS(0x001b,
> 						def_le_autoconnect_timeout),
> +		HDEV_PARAM_U16(0x001d, advmon_allowlist_duration),
> +		HDEV_PARAM_U16(0x001e, advmon_no_filter_duration),
> 	};
> 	struct mgmt_rp_read_def_system_config *rp = (void *)params;
> 
> @@ -138,6 +140,8 @@ int set_def_system_config(struct sock *sk, struct hci_dev *hdev, void *data,
> 		case 0x0019:
> 		case 0x001a:
> 		case 0x001b:
> +		case 0x001d:
> +		case 0x001e:
> 			if (len != sizeof(u16)) {
> 				bt_dev_warn(hdev, "invalid length %d, exp %zu for type %d",
> 					    len, sizeof(u16), type);
> @@ -251,6 +255,14 @@ int set_def_system_config(struct sock *sk, struct hci_dev *hdev, void *data,
> 			hdev->def_le_autoconnect_timeout =
> 					msecs_to_jiffies(TLV_GET_LE16(buffer));
> 			break;
> +		case 0x0001d:
> +			hdev->advmon_allowlist_duration =
> +							TLV_GET_LE16(buffer);
> +			break;
> +		case 0x0001e:
> +			hdev->advmon_no_filter_duration =
> +							TLV_GET_LE16(buffer);
> +			break;

in these case break the 80 chars limit.

Regards

Marcel

Powered by blists - more mailing lists