| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200921134557.2251383-6-mkl@pengutronix.de>
Date: Mon, 21 Sep 2020 15:45:24 +0200
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, linux-can@...r.kernel.org,
kernel@...gutronix.de, Marc Kleine-Budde <mkl@...gutronix.de>
Subject: [PATCH 05/38] can: drivers: fix spelling mistakes
This patch fixes spelling erros found by "codespell" in the
drivers/net/can subtree.
Link: https://lore.kernel.org/r/20200915223527.1417033-6-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@...gutronix.de>
---
drivers/net/can/at91_can.c | 8 ++++----
drivers/net/can/cc770/cc770.c | 2 +-
drivers/net/can/cc770/cc770.h | 2 +-
drivers/net/can/grcan.c | 2 +-
drivers/net/can/m_can/Kconfig | 2 +-
drivers/net/can/pch_can.c | 4 ++--
drivers/net/can/sja1000/peak_pci.c | 2 +-
drivers/net/can/sja1000/peak_pcmcia.c | 2 +-
drivers/net/can/softing/Kconfig | 4 ++--
drivers/net/can/softing/softing_fw.c | 8 ++++----
drivers/net/can/softing/softing_main.c | 8 ++++----
drivers/net/can/softing/softing_platform.h | 2 +-
drivers/net/can/ti_hecc.c | 2 +-
drivers/net/can/usb/Kconfig | 2 +-
drivers/net/can/usb/gs_usb.c | 4 ++--
drivers/net/can/usb/mcba_usb.c | 2 +-
drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 4 ++--
drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 2 +-
drivers/net/can/usb/ucan.c | 4 ++--
drivers/net/can/usb/usb_8dev.c | 4 ++--
drivers/net/can/xilinx_can.c | 2 +-
21 files changed, 36 insertions(+), 36 deletions(-)
diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index 38e9f80ed1ef..c14de95d2ca7 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -643,7 +643,7 @@ static void at91_read_msg(struct net_device *dev, unsigned int mb)
*
* The first message goes into mb nr. 1 and issues an interrupt. All
* rx ints are disabled in the interrupt handler and a napi poll is
- * scheduled. We read the mailbox, but do _not_ reenable the mb (to
+ * scheduled. We read the mailbox, but do _not_ re-enable the mb (to
* receive another message).
*
* lower mbxs upper
@@ -661,13 +661,13 @@ static void at91_read_msg(struct net_device *dev, unsigned int mb)
*
* The variable priv->rx_next points to the next mailbox to read a
* message from. As long we're in the lower mailboxes we just read the
- * mailbox but not reenable it.
+ * mailbox but not re-enable it.
*
- * With completion of the last of the lower mailboxes, we reenable the
+ * With completion of the last of the lower mailboxes, we re-enable the
* whole first group, but continue to look for filled mailboxes in the
* upper mailboxes. Imagine the second group like overflow mailboxes,
* which takes CAN messages if the lower goup is full. While in the
- * upper group we reenable the mailbox right after reading it. Giving
+ * upper group we re-enable the mailbox right after reading it. Giving
* the chip more room to store messages.
*
* After finishing we look again in the lower group if we've still
diff --git a/drivers/net/can/cc770/cc770.c b/drivers/net/can/cc770/cc770.c
index 7cdc232cbfea..07e2b8df5153 100644
--- a/drivers/net/can/cc770/cc770.c
+++ b/drivers/net/can/cc770/cc770.c
@@ -538,7 +538,7 @@ static int cc770_err(struct net_device *dev, u8 status)
priv->can.can_stats.error_warning++;
}
} else {
- /* Back to error avtive */
+ /* Back to error active */
cf->can_id |= CAN_ERR_PROT;
cf->data[2] = CAN_ERR_PROT_ACTIVE;
priv->can.state = CAN_STATE_ERROR_ACTIVE;
diff --git a/drivers/net/can/cc770/cc770.h b/drivers/net/can/cc770/cc770.h
index 948541491ab5..0628fd9e1980 100644
--- a/drivers/net/can/cc770/cc770.h
+++ b/drivers/net/can/cc770/cc770.h
@@ -184,7 +184,7 @@ struct cc770_priv {
u8 control_normal_mode; /* Control register for normal mode */
u8 cpu_interface; /* CPU interface register */
u8 clkout; /* Clock out register */
- u8 bus_config; /* Bus conffiguration register */
+ u8 bus_config; /* Bus configuration register */
struct sk_buff *tx_skb;
};
diff --git a/drivers/net/can/grcan.c b/drivers/net/can/grcan.c
index 5d1f15843181..39802f107eb1 100644
--- a/drivers/net/can/grcan.c
+++ b/drivers/net/can/grcan.c
@@ -1243,7 +1243,7 @@ static int grcan_poll(struct napi_struct *napi, int budget)
int rx_budget = budget / 2;
int tx_budget = budget - rx_budget;
- /* Half of the budget for receiveing messages */
+ /* Half of the budget for receiving messages */
rx_work_done = grcan_receive(dev, rx_budget);
/* Half of the budget for transmitting messages as that can trigger echo
diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig
index d9216147ca93..48be627c85c2 100644
--- a/drivers/net/can/m_can/Kconfig
+++ b/drivers/net/can/m_can/Kconfig
@@ -20,5 +20,5 @@ config CAN_M_CAN_TCAN4X5X
tristate "TCAN4X5X M_CAN device"
help
Say Y here if you want support for Texas Instruments TCAN4x5x
- M_CAN controller. This device is a peripherial device that uses the
+ M_CAN controller. This device is a peripheral device that uses the
SPI bus for communication.
diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index db41dddd5771..af4fbd8f9077 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -461,7 +461,7 @@ static void pch_can_int_clr(struct pch_can_priv *priv, u32 mask)
PCH_ID2_DIR | (0x7ff << 2));
iowrite32(0x0, &priv->regs->ifregs[1].id1);
- /* Claring NewDat, TxRqst & IntPnd */
+ /* Clearing NewDat, TxRqst & IntPnd */
pch_can_bit_clear(&priv->regs->ifregs[1].mcont,
PCH_IF_MCONT_NEWDAT | PCH_IF_MCONT_INTPND |
PCH_IF_MCONT_TXRQXT);
@@ -834,7 +834,7 @@ static int pch_can_open(struct net_device *ndev)
struct pch_can_priv *priv = netdev_priv(ndev);
int retval;
- /* Regstering the interrupt. */
+ /* Registering the interrupt. */
retval = request_irq(priv->dev->irq, pch_can_interrupt, IRQF_SHARED,
ndev->name, ndev);
if (retval) {
diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c
index 8c0244f51059..4713921bd511 100644
--- a/drivers/net/can/sja1000/peak_pci.c
+++ b/drivers/net/can/sja1000/peak_pci.c
@@ -97,7 +97,7 @@ MODULE_DEVICE_TABLE(pci, peak_pci_tbl);
/* GPIOICR byte access offsets */
#define PITA_GPOUT 0x18 /* GPx output value */
#define PITA_GPIN 0x19 /* GPx input value */
-#define PITA_GPOEN 0x1A /* configure GPx as ouput pin */
+#define PITA_GPOEN 0x1A /* configure GPx as output pin */
/* I2C GP bits */
#define PITA_GPIN_SCL 0x01 /* Serial Clock Line */
diff --git a/drivers/net/can/sja1000/peak_pcmcia.c b/drivers/net/can/sja1000/peak_pcmcia.c
index 5e0d5e8101c8..cf951a783078 100644
--- a/drivers/net/can/sja1000/peak_pcmcia.c
+++ b/drivers/net/can/sja1000/peak_pcmcia.c
@@ -671,7 +671,7 @@ static int pcan_probe(struct pcmcia_device *pdev)
card->fw_major = pcan_read_reg(card, PCC_FW_MAJOR);
card->fw_minor = pcan_read_reg(card, PCC_FW_MINOR);
- /* display board name and firware version */
+ /* display board name and firmware version */
dev_info(&pdev->dev, "PEAK-System pcmcia card %s fw %d.%d\n",
pdev->prod_id[1] ? pdev->prod_id[1] : "PCAN-PC Card",
card->fw_major, card->fw_minor);
diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig
index 16b9eec63490..9edc73b13014 100644
--- a/drivers/net/can/softing/Kconfig
+++ b/drivers/net/can/softing/Kconfig
@@ -5,14 +5,14 @@ config CAN_SOFTING
help
Support for CAN cards from Softing Gmbh & some cards
from Vector Gmbh.
- Softing Gmbh CAN cards come with 1 or 2 physical busses.
+ Softing Gmbh CAN cards come with 1 or 2 physical buses.
Those cards typically use Dual Port RAM to communicate
with the host CPU. The interface is then identical for PCI
and PCMCIA cards. This driver operates on a platform device,
which has been created by softing_cs or softing_pci driver.
Warning:
The API of the card does not allow fine control per bus, but
- controls the 2 busses on the card together.
+ controls the 2 buses on the card together.
As such, some actions (start/stop/busoff recovery) on 1 bus
must bring down the other bus too temporarily.
diff --git a/drivers/net/can/softing/softing_fw.c b/drivers/net/can/softing/softing_fw.c
index 8f44fdd8804b..ccd649a8e37b 100644
--- a/drivers/net/can/softing/softing_fw.c
+++ b/drivers/net/can/softing/softing_fw.c
@@ -273,7 +273,7 @@ int softing_load_app_fw(const char *file, struct softing *card)
goto failed;
}
- /* regualar data */
+ /* regular data */
for (sum = 0, j = 0; j < len; ++j)
sum += dat[j];
/* work in 16bit (target) */
@@ -474,14 +474,14 @@ int softing_startstop(struct net_device *dev, int up)
if (ret)
goto failed;
if (!bus_bitmask_start)
- /* no busses to be brought up */
+ /* no buses to be brought up */
goto card_done;
if ((bus_bitmask_start & 1) && (bus_bitmask_start & 2)
&& (softing_error_reporting(card->net[0])
!= softing_error_reporting(card->net[1]))) {
dev_alert(&card->pdev->dev,
- "err_reporting flag differs for busses\n");
+ "err_reporting flag differs for buses\n");
goto invalid;
}
error_reporting = 0;
@@ -635,7 +635,7 @@ int softing_startstop(struct net_device *dev, int up)
priv->can.state = CAN_STATE_ERROR_ACTIVE;
open_candev(netdev);
if (dev != netdev) {
- /* notify other busses on the restart */
+ /* notify other buses on the restart */
softing_netdev_rx(netdev, &msg, 0);
++priv->can.can_stats.restarts;
}
diff --git a/drivers/net/can/softing/softing_main.c b/drivers/net/can/softing/softing_main.c
index d1ddf763b188..11b0f3bcfe80 100644
--- a/drivers/net/can/softing/softing_main.c
+++ b/drivers/net/can/softing/softing_main.c
@@ -170,8 +170,8 @@ static int softing_handle_1(struct softing *card)
msg.can_dlc = CAN_ERR_DLC;
msg.data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
/*
- * service to all busses, we don't know which it was applicable
- * but only service busses that are online
+ * service to all buses, we don't know which it was applicable
+ * but only service buses that are online
*/
for (j = 0; j < ARRAY_SIZE(card->net); ++j) {
netdev = card->net[j];
@@ -339,7 +339,7 @@ static irqreturn_t softing_irq_thread(int irq, void *dev_id)
continue;
priv = netdev_priv(netdev);
if (!canif_is_active(netdev))
- /* it makes no sense to wake dead busses */
+ /* it makes no sense to wake dead buses */
continue;
if (priv->tx.pending >= TX_ECHO_SKB_MAX)
continue;
@@ -374,7 +374,7 @@ static irqreturn_t softing_irq_v1(int irq, void *dev_id)
}
/*
- * netdev/candev inter-operability
+ * netdev/candev interoperability
*/
static int softing_netdev_open(struct net_device *ndev)
{
diff --git a/drivers/net/can/softing/softing_platform.h b/drivers/net/can/softing/softing_platform.h
index 68a161547644..cd8d7904c5f0 100644
--- a/drivers/net/can/softing/softing_platform.h
+++ b/drivers/net/can/softing/softing_platform.h
@@ -19,7 +19,7 @@ struct softing_platform_data {
* 16bit, shared interrupt
*/
int generation;
- int nbus; /* # busses on device */
+ int nbus; /* # buses on device */
unsigned int freq; /* operating frequency in Hz */
unsigned int max_brp;
unsigned int max_sjw;
diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
index 94b1491b569f..fc76f7ad735a 100644
--- a/drivers/net/can/ti_hecc.c
+++ b/drivers/net/can/ti_hecc.c
@@ -454,7 +454,7 @@ static int ti_hecc_get_berr_counter(const struct net_device *ndev,
/* ti_hecc_xmit: HECC Transmit
*
* The transmit mailboxes start from 0 to HECC_MAX_TX_MBOX. In HECC the
- * priority of the mailbox for tranmission is dependent upon priority setting
+ * priority of the mailbox for transmission is dependent upon priority setting
* field in mailbox registers. The mailbox with highest value in priority field
* is transmitted first. Only when two mailboxes have the same value in
* priority field the highest numbered mailbox is transmitted first.
diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig
index 77fa830fe7dd..bcb331b0c958 100644
--- a/drivers/net/can/usb/Kconfig
+++ b/drivers/net/can/usb/Kconfig
@@ -90,7 +90,7 @@ config CAN_PEAK_USB
tristate "PEAK PCAN-USB/USB Pro interfaces for CAN 2.0b/CAN-FD"
help
This driver supports the PEAK-System Technik USB adapters that enable
- access to the CAN bus, with repect to the CAN 2.0b and/or CAN-FD
+ access to the CAN bus, with respect to the CAN 2.0b and/or CAN-FD
standards, that is:
PCAN-USB single CAN 2.0b channel USB adapter
diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c
index a4b4b742c80c..3005157059ca 100644
--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -828,7 +828,7 @@ static struct gs_can *gs_make_candev(unsigned int channel,
netdev->flags |= IFF_ECHO; /* we support full roundtrip echo */
- /* dev settup */
+ /* dev setup */
strcpy(dev->bt_const.name, "gs_usb");
dev->bt_const.tseg1_min = bt_const->tseg1_min;
dev->bt_const.tseg1_max = bt_const->tseg1_max;
@@ -852,7 +852,7 @@ static struct gs_can *gs_make_candev(unsigned int channel,
dev->tx_context[rc].echo_id = GS_MAX_TX_URBS;
}
- /* can settup */
+ /* can setup */
dev->can.state = CAN_STATE_STOPPED;
dev->can.clock.freq = bt_const->fclk_can;
dev->can.bittiming_const = &dev->bt_const;
diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c
index 21faa2ec4632..eb6fb7435061 100644
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -28,7 +28,7 @@
#define MCBA_CTX_FREE MCBA_MAX_TX_URBS
/* RX buffer must be bigger than msg size since at the
- * beggining USB messages are stacked.
+ * beginning USB messages are stacked.
*/
#define MCBA_USB_RX_BUFF_SIZE 64
#define MCBA_USB_TX_BUFF_SIZE (sizeof(struct mcba_usb_msg))
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
index 47cc1ff5b88e..ab63fd9eb982 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
@@ -35,7 +35,7 @@ MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB Pro FD adapter");
#define PCAN_UFD_RX_BUFFER_SIZE 2048
#define PCAN_UFD_TX_BUFFER_SIZE 512
-/* read some versions info from the hw devcie */
+/* read some versions info from the hw device */
struct __packed pcan_ufd_fw_info {
__le16 size_of; /* sizeof this */
__le16 type; /* type of this structure */
@@ -796,7 +796,7 @@ static int pcan_usb_fd_start(struct peak_usb_device *dev)
return err;
}
-/* socket callback used to copy berr counters values receieved through USB */
+/* socket callback used to copy berr counters values received through USB */
static int pcan_usb_fd_get_berr_counter(const struct net_device *netdev,
struct can_berr_counter *bec)
{
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
index 1689ab387612..f85b560e05db 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
@@ -973,7 +973,7 @@ int pcan_usb_pro_probe(struct usb_interface *intf)
struct usb_endpoint_descriptor *ep = &if_desc->endpoint[i].desc;
/*
- * below is the list of valid ep addreses. Any other ep address
+ * below is the list of valid ep addresses. Any other ep address
* is considered as not-CAN interface address => no dev created
*/
switch (ep->bEndpointAddress) {
diff --git a/drivers/net/can/usb/ucan.c b/drivers/net/can/usb/ucan.c
index 81e942f713e6..dc5290b36598 100644
--- a/drivers/net/can/usb/ucan.c
+++ b/drivers/net/can/usb/ucan.c
@@ -1445,7 +1445,7 @@ static int ucan_probe(struct usb_interface *intf,
/* request the device information and store it in ctl_msg_buffer
*
- * note: ucan_ctrl_command_* wrappers connot be used yet
+ * note: ucan_ctrl_command_* wrappers cannot be used yet
* because `up` is initialised in Stage 3
*/
ret = usb_control_msg(udev,
@@ -1494,7 +1494,7 @@ static int ucan_probe(struct usb_interface *intf,
up = netdev_priv(netdev);
- /* initialze data */
+ /* initialize data */
up->udev = udev;
up->intf = intf;
up->netdev = netdev;
diff --git a/drivers/net/can/usb/usb_8dev.c b/drivers/net/can/usb/usb_8dev.c
index 8fa224b28218..62749c67c959 100644
--- a/drivers/net/can/usb/usb_8dev.c
+++ b/drivers/net/can/usb/usb_8dev.c
@@ -88,7 +88,7 @@ enum usb_8dev_cmd {
/* status */
#define USB_8DEV_STATUSMSG_OK 0x00 /* Normal condition. */
-#define USB_8DEV_STATUSMSG_OVERRUN 0x01 /* Overrun occured when sending */
+#define USB_8DEV_STATUSMSG_OVERRUN 0x01 /* Overrun occurred when sending */
#define USB_8DEV_STATUSMSG_BUSLIGHT 0x02 /* Error counter has reached 96 */
#define USB_8DEV_STATUSMSG_BUSHEAVY 0x03 /* Error count. has reached 128 */
#define USB_8DEV_STATUSMSG_BUSOFF 0x04 /* Device is in BUSOFF */
@@ -165,7 +165,7 @@ struct __packed usb_8dev_rx_msg {
/* command frame */
struct __packed usb_8dev_cmd_msg {
u8 begin;
- u8 channel; /* unkown - always 0 */
+ u8 channel; /* unknown - always 0 */
u8 command; /* command to execute */
u8 opt1; /* optional parameter / return value */
u8 opt2; /* optional parameter 2 */
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index c1dbab8c896d..7ae268468d2c 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -1308,7 +1308,7 @@ static void xcan_tx_interrupt(struct net_device *ndev, u32 isr)
/**
* xcan_interrupt - CAN Isr
* @irq: irq number
- * @dev_id: device id poniter
+ * @dev_id: device id pointer
*
* This is the xilinx CAN Isr. It checks for the type of interrupt
* and invokes the corresponding ISR.
--
2.28.0
Powered by blists - more mailing lists