[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <b4960a59-a864-d6f8-cef6-7223a6351dae@pengutronix.de>
Date: Fri, 25 Sep 2020 09:33:20 +0200
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: Joakim Zhang <qiangqing.zhang@....com>, linux-can@...r.kernel.org
Cc: linux-imx@....com, netdev@...r.kernel.org
Subject: Re: [PATCH linux-can-next/flexcan 1/4] can: flexcan: initialize all
flexcan memory for ECC function
On 9/25/20 5:10 PM, Joakim Zhang wrote:
> There is a NOTE at the section "Detection and correction of memory errors":
> All FlexCAN memory must be initialized before starting its operation in
> order to have the parity bits in memory properly updated. CTRL2[WRMFRZ]
> grants write access to all memory positions that require initialization,
> ranging from 0x080 to 0xADF and from 0xF28 to 0xFFF when the CAN FD feature
> is enabled. The RXMGMASK, RX14MASK, RX15MASK, and RXFGMASK registers need to
> be initialized as well. MCR[RFEN] must not be set during memory initialization.
>
> Memory range from 0x080 to 0xADF, there are reserved memory (unimplemented
> by hardware), these memory can be initialized or not.
>
> Initialize all FlexCAN memory before accessing them, otherwise, memory
> errors may be detected. The internal region cannot be initialized when
> the hardware does not support ECC.
>
> Signed-off-by: Joakim Zhang <qiangqing.zhang@....com>
Is this whole patch valid/compatible with the mx7,too?
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists