[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <82b358f40c81cfdecbfc394113be40fd1f682043.1601387231.git.lucien.xin@gmail.com>
Date: Tue, 29 Sep 2020 21:49:05 +0800
From: Xin Long <lucien.xin@...il.com>
To: network dev <netdev@...r.kernel.org>, linux-sctp@...r.kernel.org
Cc: Marcelo Ricardo Leitner <marcelo.leitner@...il.com>,
Neil Horman <nhorman@...driver.com>,
Michael Tuexen <tuexen@...muenster.de>,
Tom Herbert <therbert@...gle.com>, davem@...emloft.net
Subject: [PATCH net-next 13/15] sctp: support for sending packet over udp4 sock
This patch does what the rfc6951#section-5.3 says for ipv4:
"Within the UDP header, the source port MUST be the local UDP
encapsulation port number of the SCTP stack, and the destination port
MUST be the remote UDP encapsulation port number maintained for the
association and the destination address to which the packet is sent
(see Section 5.1).
Because the SCTP packet is the UDP payload, the length of the UDP
packet MUST be the length of the SCTP packet plus the size of the UDP
header.
The SCTP checksum MUST be computed for IPv4 and IPv6, and the UDP
checksum SHOULD be computed for IPv4 and IPv6."
Some places need to be adjusted in sctp_packet_transmit():
1. For non-gso packets, when transport's encap_port is set, sctp
checksum has to be done in sctp_packet_pack(), as the outer
udp will use ip_summed = CHECKSUM_PARTIAL to do the offload
setting for checksum.
2. Delay calling dst_clone() and skb_dst_set() for non-udp packets
until sctp_v4_xmit(), as for udp packets, skb_dst_set() is not
needed before calling udp_tunnel_xmit_skb().
then in sctp_v4_xmit():
1. Go to udp_tunnel_xmit_skb() only when transport->encap_port and
net->sctp.udp_port both are set, as these are one for dst port
and another for src port.
2. For gso packet, SKB_GSO_UDP_TUNNEL_CSUM is set for gso_type, and
with this udp checksum can be done in __skb_udp_tunnel_segment()
for each segments after the sctp gso.
3. inner_mac_header and inner_transport_header are set, as these
will be needed in __skb_udp_tunnel_segment() to find the right
headers.
4. df and ttl are calculated, as these are the required params by
udp_tunnel_xmit_skb().
5. nocheck param has to be false, as "the UDP checksum SHOULD be
computed for IPv4 and IPv6", says in rfc6951#section-5.3.
Signed-off-by: Xin Long <lucien.xin@...il.com>
---
net/sctp/output.c | 9 +++------
net/sctp/protocol.c | 44 +++++++++++++++++++++++++++++++++-----------
2 files changed, 36 insertions(+), 17 deletions(-)
diff --git a/net/sctp/output.c b/net/sctp/output.c
index fb16500..6614c9f 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -514,8 +514,8 @@ static int sctp_packet_pack(struct sctp_packet *packet,
if (sctp_checksum_disable)
return 1;
- if (!(skb_dst(head)->dev->features & NETIF_F_SCTP_CRC) ||
- dst_xfrm(skb_dst(head)) || packet->ipfragok) {
+ if (!(tp->dst->dev->features & NETIF_F_SCTP_CRC) ||
+ dst_xfrm(tp->dst) || packet->ipfragok || tp->encap_port) {
struct sctphdr *sh =
(struct sctphdr *)skb_transport_header(head);
@@ -542,7 +542,6 @@ int sctp_packet_transmit(struct sctp_packet *packet, gfp_t gfp)
struct sctp_association *asoc = tp->asoc;
struct sctp_chunk *chunk, *tmp;
int pkt_count, gso = 0;
- struct dst_entry *dst;
struct sk_buff *head;
struct sctphdr *sh;
struct sock *sk;
@@ -579,13 +578,11 @@ int sctp_packet_transmit(struct sctp_packet *packet, gfp_t gfp)
sh->checksum = 0;
/* drop packet if no dst */
- dst = dst_clone(tp->dst);
- if (!dst) {
+ if (!tp->dst) {
IP_INC_STATS(sock_net(sk), IPSTATS_MIB_OUTNOROUTES);
kfree_skb(head);
goto out;
}
- skb_dst_set(head, dst);
rcu_read_lock();
if (__sk_dst_get(sk) != tp->dst) {
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index c73fd5f..6606a63 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -44,6 +44,7 @@
#include <net/addrconf.h>
#include <net/inet_common.h>
#include <net/inet_ecn.h>
+#include <net/udp_tunnel.h>
#define MAX_SCTP_PORT_HASH_ENTRIES (64 * 1024)
@@ -1053,25 +1054,46 @@ static int sctp_inet_supported_addrs(const struct sctp_sock *opt,
}
/* Wrapper routine that calls the ip transmit routine. */
-static inline int sctp_v4_xmit(struct sk_buff *skb,
- struct sctp_transport *transport)
+static inline int sctp_v4_xmit(struct sk_buff *skb, struct sctp_transport *t)
{
- struct inet_sock *inet = inet_sk(skb->sk);
+ struct dst_entry *dst = dst_clone(t->dst);
+ struct flowi4 *fl4 = &t->fl.u.ip4;
+ struct sock *sk = skb->sk;
+ struct inet_sock *inet = inet_sk(sk);
+ struct net *net = sock_net(sk);
__u8 dscp = inet->tos;
+ __be16 df = 0;
pr_debug("%s: skb:%p, len:%d, src:%pI4, dst:%pI4\n", __func__, skb,
- skb->len, &transport->fl.u.ip4.saddr,
- &transport->fl.u.ip4.daddr);
+ skb->len, &fl4->saddr, &fl4->daddr);
+
+ if (t->dscp & SCTP_DSCP_SET_MASK)
+ dscp = t->dscp & SCTP_DSCP_VAL_MASK;
- if (transport->dscp & SCTP_DSCP_SET_MASK)
- dscp = transport->dscp & SCTP_DSCP_VAL_MASK;
+ inet->pmtudisc = t->param_flags & SPP_PMTUD_ENABLE ? IP_PMTUDISC_DO
+ : IP_PMTUDISC_DONT;
+ SCTP_INC_STATS(net, SCTP_MIB_OUTSCTPPACKS);
- inet->pmtudisc = transport->param_flags & SPP_PMTUD_ENABLE ?
- IP_PMTUDISC_DO : IP_PMTUDISC_DONT;
+ if (!t->encap_port || !net->sctp.udp_port) {
+ skb_dst_set(skb, dst);
+ return __ip_queue_xmit(sk, skb, &t->fl, dscp);
+ }
+
+ if (skb_is_gso(skb))
+ skb_shinfo(skb)->gso_type |= SKB_GSO_UDP_TUNNEL_CSUM;
- SCTP_INC_STATS(sock_net(&inet->sk), SCTP_MIB_OUTSCTPPACKS);
+ if (ip_dont_fragment(sk, dst) && !skb->ignore_df)
+ df = htons(IP_DF);
- return __ip_queue_xmit(&inet->sk, skb, &transport->fl, dscp);
+ skb->encapsulation = 1;
+ skb_reset_inner_mac_header(skb);
+ skb_reset_inner_transport_header(skb);
+ skb_set_inner_ipproto(skb, IPPROTO_SCTP);
+ udp_tunnel_xmit_skb((struct rtable *)dst, sk, skb, fl4->saddr,
+ fl4->daddr, dscp, ip4_dst_hoplimit(dst), df,
+ htons(net->sctp.udp_port), htons(t->encap_port),
+ false, false);
+ return 0;
}
static struct sctp_af sctp_af_inet;
--
2.1.0
Powered by blists - more mailing lists