[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200929200943.3364-2-kevinbrace@gmx.com>
Date: Tue, 29 Sep 2020 13:09:40 -0700
From: Kevin Brace <kevinbrace@....com>
To: netdev@...r.kernel.org
Cc: Kevin Brace <kevinbrace@...cecomputerlab.com>
Subject: [PATCH net v2 1/4] via-rhine: Fix for the hardware having a reset failure after resume
From: Kevin Brace <kevinbrace@...cecomputerlab.com>
In rhine_resume() and rhine_suspend(), the code calls netif_running()
to see if the network interface is down or not. If it is down (i.e.,
netif_running() returning false), they will skip any housekeeping work
within the function relating to the hardware. This becomes a problem
when the hardware resumes from a standby since it is counting on
rhine_resume() to map its MMIO and power up rest of the hardware.
Not getting its MMIO remapped and rest of the hardware powered
up lead to a soft reset failure and hardware disappearance. The
solution is to map its MMIO and power up rest of the hardware inside
rhine_open() before soft reset is to be performed. This solution was
verified on ASUS P5V800-VM mainboard's integrated Rhine-II Ethernet
MAC inside VIA Technologies VT8251 South Bridge.
Signed-off-by: Kevin Brace <kevinbrace@...cecomputerlab.com>
---
drivers/net/ethernet/via/via-rhine.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c
index 803247d51fe9..a20492da3407 100644
--- a/drivers/net/ethernet/via/via-rhine.c
+++ b/drivers/net/ethernet/via/via-rhine.c
@@ -1706,6 +1706,8 @@ static int rhine_open(struct net_device *dev)
goto out_free_ring;
alloc_tbufs(dev);
+ enable_mmio(rp->pioaddr, rp->quirks);
+ rhine_power_init(dev);
rhine_chip_reset(dev);
rhine_task_enable(rp);
init_registers(dev);
--
2.17.1
Powered by blists - more mailing lists