netdev - [PATCH net-next v2 00/10] arm64: dts: layerscape: update MAC nodes with PHY information

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201002210737.27645-1-ioana.ciornei@nxp.com>
Date:   Sat,  3 Oct 2020 00:07:27 +0300
From:   Ioana Ciornei <ioana.ciornei@....com>
To:     davem@...emloft.net, netdev@...r.kernel.org
Cc:     shawnguo@...nel.org, robh+dt@...nel.org,
        devicetree@...r.kernel.org, Ioana Ciornei <ioana.ciornei@....com>
Subject: [PATCH net-next v2 00/10] arm64: dts: layerscape: update MAC nodes with PHY information

This patch set aims to add the necessary DTS nodes to complete the
MAC/PCS/PHY representation on DPAA2 devices. The external MDIO bus nodes
and the PHYs found on them are added, along with the PCS MDIO internal
buses and their PCS PHYs. Also, links to these PHYs are added from the
DPMAC node.

I am resending these via netdev because I am not really sure if Shawn is
still able to take them in time for 5.10 since his last activity on the
tree has been some time ago.
I tested them on linux-next and there are no conflicts.

Changes in v2:
 - documented the dpmac node into a new yaml entry
 - dropped the '0x' from some unit addresses

Ioana Ciornei (10):
  dt-bindings: net: add the dpaa2-mac DTS definition
  arm64: dts: ls1088a: add external MDIO device nodes
  arm64: dts: ls1088ardb: add QSGMII PHY nodes
  arm64: dts: ls1088ardb: add necessary DTS nodes for DPMAC2
  arm64: dts: ls208xa: add the external MDIO nodes
  arm64: dts: ls2088ardb: add PHY nodes for the CS4340 PHYs
  arm64: dts: ls2088ardb: add PHY nodes for the AQR405 PHYs
  arm64: dts: ls208xa: add PCS MDIO and PCS PHY nodes
  arm64: dts: lx2160a: add PCS MDIO and PCS PHY nodes
  arm64: dts: lx2160ardb: add nodes for the AQR107 PHYs

 .../devicetree/bindings/net/dpaa2-mac.yaml    |  55 ++++
 .../boot/dts/freescale/fsl-ls1088a-rdb.dts    | 119 +++++++++
 .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi |  81 ++++++
 .../boot/dts/freescale/fsl-ls2088a-rdb.dts    | 118 ++++++++
 .../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 242 +++++++++++++++++
 .../boot/dts/freescale/fsl-lx2160a-rdb.dts    |  32 +++
 .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 252 ++++++++++++++++++
 7 files changed, 899 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/dpaa2-mac.yaml

-- 
2.28.0