| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201004112911.25085-1-kurt@linutronix.de>
Date: Sun, 4 Oct 2020 13:29:04 +0200
From: Kurt Kanzenbach <kurt@...utronix.de>
To: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>
Cc: "David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
Sebastian Andrzej Siewior <bigeasy@...utronix.de>,
Richard Cochran <richardcochran@...il.com>,
Kamil Alkhouri <kamil.alkhouri@...offenburg.de>,
ilias.apalodimas@...aro.org, Kurt Kanzenbach <kurt@...utronix.de>
Subject: [PATCH net-next v6 0/7] Hirschmann Hellcreek DSA driver
Hi,
this series adds a DSA driver for the Hirschmann Hellcreek TSN switch
IP. Characteristics of that IP:
* Full duplex Ethernet interface at 100/1000 Mbps on three ports
* IEEE 802.1Q-compliant Ethernet Switch
* IEEE 802.1Qbv Time-Aware scheduling support
* IEEE 1588 and IEEE 802.1AS support
That IP is used e.g. in
https://www.arrow.com/en/campaigns/arrow-kairos
Due to the hardware setup the switch driver is implemented using DSA. A special
tagging protocol is leveraged. Furthermore, this driver supports PTP and
hardware timestamping.
This version implements the DSA configure_vlan_while_not_filtering behavior by
caching any VLAN requests when vlan_filtering is not set and restoring it as
soon as it is. Due to the lack of a port forwarding matrix in hardware, VLANs
are used to reflect the initial DSA/switchdev port separation. Patch two is the
only one which changed and has to be re-reviewed. Thanks!
This work is part of the AccessTSN project: https://www.accesstsn.com/
The previous versions can be found here:
* https://lkml.kernel.org/netdev/20200618064029.32168-1-kurt@linutronix.de/
* https://lkml.kernel.org/netdev/20200710113611.3398-1-kurt@linutronix.de/
* https://lkml.kernel.org/netdev/20200723081714.16005-1-kurt@linutronix.de/
* https://lkml.kernel.org/netdev/20200820081118.10105-1-kurt@linutronix.de/
* https://lkml.kernel.org/netdev/20200901125014.17801-1-kurt@linutronix.de/
* https://lkml.kernel.org/netdev/20200904062739.3540-1-kurt@linutronix.de/
Changes since v5:
* Implement configure_vlan_while_not_filtering behavior (Vladimir Oltean)
* Minor cleanups
Changes since v4:
* Fix W=1 compiler warnings (kernel test robot)
* Add tags
Changes since v3:
* Drop TAPRIO support (David Miller)
=> Switch to mutexes due to the lack of hrtimers
* Use more specific compatible strings and add platform data (Andrew Lunn)
* Fix Kconfig ordering (Andrew Lunn)
Changes since v2:
* Make it compile by getting all requirements merged first (Jakub Kicinski, David Miller)
* Use "tsn" for TSN register set (Rob Herring)
* Fix DT binding issues (Rob Herring)
Changes since v1:
* Code simplifications (Florian Fainelli, Vladimir Oltean)
* Fix issues with hellcreek.yaml bindings (Florian Fainelli)
* Clear reserved field in ptp v2 event messages (Richard Cochran)
* Make use of generic ptp parsing function (Richard Cochran, Vladimir Oltean)
* Fix Kconfig (Florian Fainelli)
* Add tags (Florian Fainelli, Rob Herring, Richard Cochran)
Changes since RFC ordered by reviewers:
* Andrew Lunn
* Use dev_dbg for debug messages
* Get rid of __ function names where possible
* Use reverse xmas tree variable ordering
* Remove redundant/useless checks
* Improve comments e.g. for PTP
* Fix Kconfig ordering
* Make LED handling more generic and provide info via DT
* Setup advertisement of PHYs according to hardware
* Drop debugfs patch
* Jakub Kicinski
* Fix compiler warnings
* Florian Fainelli
* Switch to YAML DT bindings
* Richard Cochran
* Fix typo
* Add missing NULL checks
Kamil Alkhouri (2):
net: dsa: hellcreek: Add PTP clock support
net: dsa: hellcreek: Add support for hardware timestamping
Kurt Kanzenbach (5):
net: dsa: Add tag handling for Hirschmann Hellcreek switches
net: dsa: Add DSA driver for Hirschmann Hellcreek switches
net: dsa: hellcreek: Add PTP status LEDs
dt-bindings: Add vendor prefix for Hirschmann
dt-bindings: net: dsa: Add documentation for Hellcreek switches
.../bindings/net/dsa/hellcreek.yaml | 127 ++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
drivers/net/dsa/Kconfig | 2 +
drivers/net/dsa/Makefile | 1 +
drivers/net/dsa/hirschmann/Kconfig | 9 +
drivers/net/dsa/hirschmann/Makefile | 5 +
drivers/net/dsa/hirschmann/hellcreek.c | 1371 +++++++++++++++++
drivers/net/dsa/hirschmann/hellcreek.h | 292 ++++
.../net/dsa/hirschmann/hellcreek_hwtstamp.c | 479 ++++++
.../net/dsa/hirschmann/hellcreek_hwtstamp.h | 58 +
drivers/net/dsa/hirschmann/hellcreek_ptp.c | 452 ++++++
drivers/net/dsa/hirschmann/hellcreek_ptp.h | 76 +
.../platform_data/hirschmann-hellcreek.h | 23 +
include/net/dsa.h | 2 +
net/dsa/Kconfig | 6 +
net/dsa/Makefile | 1 +
net/dsa/tag_hellcreek.c | 101 ++
17 files changed, 3007 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/dsa/hellcreek.yaml
create mode 100644 drivers/net/dsa/hirschmann/Kconfig
create mode 100644 drivers/net/dsa/hirschmann/Makefile
create mode 100644 drivers/net/dsa/hirschmann/hellcreek.c
create mode 100644 drivers/net/dsa/hirschmann/hellcreek.h
create mode 100644 drivers/net/dsa/hirschmann/hellcreek_hwtstamp.c
create mode 100644 drivers/net/dsa/hirschmann/hellcreek_hwtstamp.h
create mode 100644 drivers/net/dsa/hirschmann/hellcreek_ptp.c
create mode 100644 drivers/net/dsa/hirschmann/hellcreek_ptp.h
create mode 100644 include/linux/platform_data/hirschmann-hellcreek.h
create mode 100644 net/dsa/tag_hellcreek.c
--
2.20.1
Powered by blists - more mailing lists