lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Sun, 4 Oct 2020 20:30:42 +0200 From: Wilken Gottwalt <wilken.gottwalt@...lbox.org> To: Bjørn Mork <bjorn@...k.no> Cc: linux-kernel@...r.kernel.org, "David S. Miller" <davem@...emloft.net>, Jakub Kicinski <kuba@...nel.org>, Johan Hovold <johan@...nel.org>, Greg Kroah-Hartman <gregkh@...uxfoundation.org>, netdev@...r.kernel.org, linux-usb@...r.kernel.org Subject: Re: [PATCH 1/2] usb: serial: qmi_wwan: add Cellient MPL200 card On Sun, 04 Oct 2020 17:29:38 +0200 Bjørn Mork <bjorn@...k.no> wrote: > Wilken Gottwalt <wilken.gottwalt@...lbox.org> writes: > > > Add usb ids of the Cellient MPL200 card. > > > > Signed-off-by: Wilken Gottwalt <wilken.gottwalt@...lbox.org> > > --- > > drivers/net/usb/qmi_wwan.c | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c > > index 07c42c0719f5..0bf2b19d5d54 100644 > > --- a/drivers/net/usb/qmi_wwan.c > > +++ b/drivers/net/usb/qmi_wwan.c > > This is not a 'usb: serial' driver. Please resend with a less confusing > subject prefix. > > > @@ -1432,6 +1432,7 @@ static const struct usb_device_id products[] = { > > {QMI_GOBI_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */ > > {QMI_GOBI_DEVICE(0x12d1, 0x14f1)}, /* Sony Gobi 3000 Composite */ > > {QMI_GOBI_DEVICE(0x1410, 0xa021)}, /* Foxconn Gobi 3000 Modem device (Novatel > > E396) */ > > + {QMI_FIXED_INTF(0x2692, 0x9025, 4)}, /* Cellient MPL200 (rebranded Qualcomm > > 0x05c6) */ > > { } /* END */ > > }; > > > This table is supposed to be organized by device type. The last section > is for Gobi2k and Gobi3k devices. Please try to put new devices into > the correct section. Oh sorry, looks like I got it mixed up a bit. It was my first attempt to submit a patch set. Which is the best way to resubmit an update if the other part of the patch set gets accepted? The documentation about re-/submitting patch sets is a bit thin. Will
Powered by blists - more mailing lists