lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2baf2f6a-bad1-d008-fa11-3389c6b38f5b@ti.com>
Date:   Thu, 8 Oct 2020 12:00:49 -0500
From:   Dan Murphy <dmurphy@...com>
To:     Heiner Kallweit <hkallweit1@...il.com>, <davem@...emloft.net>,
        <andrew@...n.ch>, <f.fainelli@...il.com>
CC:     <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH net-next 2/2] net: phy: dp83td510: Add support for the
 DP83TD510 Ethernet PHY

Heiner

On 10/8/20 11:51 AM, Heiner Kallweit wrote:
> On 08.10.2020 18:23, Dan Murphy wrote:
>> The DP83TD510E is an ultra-low power Ethernet physical layer transceiver
>> that supports 10M single pair cable.
>>
>> The device supports both 2.4-V p2p and 1-V p2p output voltage as defined
>> by IEEE 802.3cg 10Base-T1L specfications. These modes can be forced via
>> the device tree or the device is defaulted to auto negotiation to
>> determine the proper p2p voltage.
>>
>> Signed-off-by: Dan Murphy <dmurphy@...com>
>> ---
>>   drivers/net/phy/Kconfig     |   6 +

<snip>


>> +static struct phy_driver dp83td510_driver[] = {
>> +	{
>> +		PHY_ID_MATCH_MODEL(DP83TD510E_PHY_ID),
>> +		.name		= "TI DP83TD510E",
>> +		.probe          = dp83td510_probe,
>> +		.config_init	= dp83td510_config_init,
>> +		.soft_reset	= dp83td510_phy_reset,
>> +		.features	= PHY_BASIC_FEATURES,
> Per default phylib uses genphy_read_abilities() to auto-detect
> the features. Doesn't your PHY support the needed clause 22
> standard registers? Or are they incorrectly populated?
>
> Maybe better than setting PHY_BASIC_FEATURES and then removing
> unsuported features in dp83td510_config_init() would be to
> implement phy_driver callback get_features. Then you can set
> the supported fatures directly.
>
Thanks for the review.  I will have to look at this maybe the call back 
will be better.

I will probably post v2 after net-next opens for 5.10.

I wanted to get some reviews on this patch before net-next closes for 
the merge window.

Dan

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ