lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Fri, 16 Oct 2020 22:19:51 -0700
From:   Xie He <xie.he.0141@...il.com>
To:     "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, Krzysztof Halasa <khc@...waw.pl>
Cc:     Xie He <xie.he.0141@...il.com>
Subject: [PATCH net-next] drivers/net/wan/hdlc_fr: Improve fr_rx and add support for any Ethertype

1. Change the fr_rx function to make this driver support any Ethertype
when receiving. (This driver is already able to handle any Ethertype
when sending.)

Originally in the fr_rx function, the code that parses the long (10-byte)
header only recognizes a few Ethertype values and drops frames with other
Ethertype values. This patch replaces this code to make fr_rx support
any Ethertype. This patch also creates a new function fr_snap_parse as
part of the new code.

2. Change the use of the "dev" variable in fr_rx. Originally we do
"dev = something", and then at the end do "if (dev) skb->dev = dev".
Now we do "if (something) skb->dev = something", then at the end do
"dev = skb->dev".

This is to make the logic of our code consistent with eth_type_trans
(which we call). The eth_type_trans function expects a non-NULL pointer
as a parameter and assigns it directly to skb->dev.

3. Change the initial skb->len check in fr_fx from "<= 4" to "< 4".
At first we only need to ensure a 4-byte header is present. We indeed
normally need the 5th byte, too, but it'd be more logical to check its
existence when we actually need it.

Also add an fh->ea2 check to the initial checks in fr_fx. fh->ea2 == 1
means the second address byte is the final address byte. We only support
the case where the address length is 2 bytes.

4. Use "goto rx_drop" whenever we need to drop a valid frame.

Cc: Krzysztof Halasa <khc@...waw.pl>
Signed-off-by: Xie He <xie.he.0141@...il.com>
---
 drivers/net/wan/hdlc_fr.c | 119 +++++++++++++++++++++++---------------
 1 file changed, 73 insertions(+), 46 deletions(-)

diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 409e5a7ad8e2..e95efc14bc97 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -871,6 +871,45 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb)
 	return 0;
 }
 
+static int fr_snap_parse(struct sk_buff *skb, struct pvc_device *pvc)
+{
+	/* OUI 00-00-00 indicates an Ethertype follows */
+	if (skb->data[0] == 0x00 &&
+	    skb->data[1] == 0x00 &&
+	    skb->data[2] == 0x00) {
+		if (!pvc->main)
+			return -1;
+		skb->dev = pvc->main;
+		skb->protocol = *(__be16 *)(skb->data + 3); /* Ethertype */
+		skb_pull(skb, 5);
+		skb_reset_mac_header(skb);
+		return 0;
+
+	/* OUI 00-80-C2 stands for the 802.1 organization */
+	} else if (skb->data[0] == 0x00 &&
+		   skb->data[1] == 0x80 &&
+		   skb->data[2] == 0xC2) {
+		/* PID 00-07 stands for Ethernet frames without FCS */
+		if (skb->data[3] == 0x00 &&
+		    skb->data[4] == 0x07) {
+			if (!pvc->ether)
+				return -1;
+			skb_pull(skb, 5);
+			if (skb->len < ETH_HLEN)
+				return -1;
+			skb->protocol = eth_type_trans(skb, pvc->ether);
+			return 0;
+
+		/* PID unsupported */
+		} else {
+			return -1;
+		}
+
+	/* OUI unsupported */
+	} else {
+		return -1;
+	}
+}
 
 static int fr_rx(struct sk_buff *skb)
 {
@@ -880,9 +919,9 @@ static int fr_rx(struct sk_buff *skb)
 	u8 *data = skb->data;
 	u16 dlci;
 	struct pvc_device *pvc;
-	struct net_device *dev = NULL;
+	struct net_device *dev;
 
-	if (skb->len <= 4 || fh->ea1 || data[2] != FR_UI)
+	if (skb->len < 4 || fh->ea1 || !fh->ea2 || data[2] != FR_UI)
 		goto rx_error;
 
 	dlci = q922_to_dlci(skb->data);
@@ -904,8 +943,7 @@ static int fr_rx(struct sk_buff *skb)
 		netdev_info(frad, "No PVC for received frame's DLCI %d\n",
 			    dlci);
 #endif
-		dev_kfree_skb_any(skb);
-		return NET_RX_DROP;
+		goto rx_drop;
 	}
 
 	if (pvc->state.fecn != fh->fecn) {
@@ -931,63 +969,52 @@ static int fr_rx(struct sk_buff *skb)
 	}
 
 	if (data[3] == NLPID_IP) {
+		if (!pvc->main)
+			goto rx_drop;
 		skb_pull(skb, 4); /* Remove 4-byte header (hdr, UI, NLPID) */
-		dev = pvc->main;
+		skb->dev = pvc->main;
 		skb->protocol = htons(ETH_P_IP);
+		skb_reset_mac_header(skb);
 
 	} else if (data[3] == NLPID_IPV6) {
+		if (!pvc->main)
+			goto rx_drop;
 		skb_pull(skb, 4); /* Remove 4-byte header (hdr, UI, NLPID) */
-		dev = pvc->main;
+		skb->dev = pvc->main;
 		skb->protocol = htons(ETH_P_IPV6);
+		skb_reset_mac_header(skb);
 
-	} else if (skb->len > 10 && data[3] == FR_PAD &&
-		   data[4] == NLPID_SNAP && data[5] == FR_PAD) {
-		u16 oui = ntohs(*(__be16*)(data + 6));
-		u16 pid = ntohs(*(__be16*)(data + 8));
-		skb_pull(skb, 10);
-
-		switch ((((u32)oui) << 16) | pid) {
-		case ETH_P_ARP: /* routed frame with SNAP */
-		case ETH_P_IPX:
-		case ETH_P_IP:	/* a long variant */
-		case ETH_P_IPV6:
-			dev = pvc->main;
-			skb->protocol = htons(pid);
-			break;
-
-		case 0x80C20007: /* bridged Ethernet frame */
-			if ((dev = pvc->ether) != NULL)
-				skb->protocol = eth_type_trans(skb, dev);
-			break;
-
-		default:
-			netdev_info(frad, "Unsupported protocol, OUI=%x PID=%x\n",
-				    oui, pid);
-			dev_kfree_skb_any(skb);
-			return NET_RX_DROP;
+	} else if (data[3] == FR_PAD) {
+		if (skb->len < 5)
+			goto rx_error;
+		if (data[4] == NLPID_SNAP) { /* A SNAP header follows */
+			skb_pull(skb, 5);
+			if (skb->len < 5) /* Incomplete SNAP header */
+				goto rx_error;
+			if (fr_snap_parse(skb, pvc))
+				goto rx_drop;
+		} else {
+			goto rx_drop;
 		}
+
 	} else {
 		netdev_info(frad, "Unsupported protocol, NLPID=%x length=%i\n",
 			    data[3], skb->len);
-		dev_kfree_skb_any(skb);
-		return NET_RX_DROP;
+		goto rx_drop;
 	}
 
-	if (dev) {
-		dev->stats.rx_packets++; /* PVC traffic */
-		dev->stats.rx_bytes += skb->len;
-		if (pvc->state.becn)
-			dev->stats.rx_compressed++;
-		skb->dev = dev;
-		netif_rx(skb);
-		return NET_RX_SUCCESS;
-	} else {
-		dev_kfree_skb_any(skb);
-		return NET_RX_DROP;
-	}
+	dev = skb->dev;
+	dev->stats.rx_packets++; /* PVC traffic */
+	dev->stats.rx_bytes += skb->len;
+	if (pvc->state.becn)
+		dev->stats.rx_compressed++;
+	netif_rx(skb);
+	return NET_RX_SUCCESS;
 
- rx_error:
+rx_error:
 	frad->stats.rx_errors++; /* Mark error */
+rx_drop:
+	frad->stats.rx_dropped++;
 	dev_kfree_skb_any(skb);
 	return NET_RX_DROP;
 }
-- 
2.25.1

Powered by blists - more mailing lists