| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20201019212556.GA3625661@bogus>
Date: Mon, 19 Oct 2020 16:25:56 -0500
From: Rob Herring <robh@...nel.org>
To: Oleksij Rempel <o.rempel@...gutronix.de>
Cc: mkl@...gutronix.de, Wolfgang Grandegger <wg@...ndegger.com>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>, kernel@...gutronix.de,
linux-can@...r.kernel.org, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Joakim Zhang <qiangqing.zhang@....com>
Subject: Re: [PATCH v2 2/2] dt-bindings: can: flexcan: convert fsl,*flexcan
bindings to yaml
On Fri, Oct 16, 2020 at 09:33:15AM +0200, Oleksij Rempel wrote:
> In order to automate the verification of DT nodes convert
> fsl-flexcan.txt to fsl,flexcan.yaml
>
> Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> ---
> .../bindings/net/can/fsl,flexcan.yaml | 137 ++++++++++++++++++
> .../bindings/net/can/fsl-flexcan.txt | 57 --------
> 2 files changed, 137 insertions(+), 57 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
> delete mode 100644 Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
>
> diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
> new file mode 100644
> index 000000000000..c5c72bcd47c8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
> @@ -0,0 +1,137 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/can/fsl,flexcan.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title:
> + Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
> +
> +maintainers:
> + - Marc Kleine-Budde <mkl@...gutronix.de>
> +
> +allOf:
> + - $ref: can-controller.yaml#
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - fsl,imx8qm-flexcan
> + - fsl,imx8mp-flexcan
> + - fsl,imx6q-flexcan
> + - fsl,imx53-flexcan
> + - fsl,imx35-flexcan
> + - fsl,imx28-flexcan
> + - fsl,imx25-flexcan
> + - fsl,p1010-flexcan
> + - fsl,vf610-flexcan
> + - fsl,ls1021ar2-flexcan
> + - fsl,lx2160ar1-flexcan
> + - items:
> + - enum:
> + - fsl,imx7d-flexcan
> + - fsl,imx6ul-flexcan
> + - fsl,imx6sx-flexcan
> + - const: fsl,imx6q-flexcan
> + - items:
> + - enum:
> + - fsl,ls1028ar1-flexcan
> + - const: fsl,lx2160ar1-flexcan
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 2
> +
> + clock-names:
> + items:
> + - const: ipg
> + - const: per
> +
> + clock-frequency:
> + description: |
> + The oscillator frequency driving the flexcan device, filled in by the
> + boot loader. This property should only be used the used operating system
> + doesn't support the clocks and clock-names property.
> + $ref: /schemas/types.yaml#/definitions/uint32
Standard prop, already has a type.
> +
> + xceiver-supply:
> + description: Regulator that powers the CAN transceiver.
> + maxItems: 1
*-supply is always a single item. Drop maxItems.
> +
> + big-endian:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description: |
> + This means the registers of FlexCAN controller are big endian. This is
> + optional property.i.e. if this property is not present in device tree
> + node then controller is assumed to be little endian. If this property is
> + present then controller is assumed to be big endian.
> +
> + fsl,stop-mode:
> + description: |
> + Register bits of stop mode control.
> +
> + The format should be as follows:
> + <gpr req_gpr req_bit>
> + gpr is the phandle to general purpose register node.
> + req_gpr is the gpr register offset of CAN stop request.
> + req_bit is the bit offset of CAN stop request.
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + items:
> + - description: The 'gpr' is the phandle to general purpose register node.
> + - description: The 'req_gpr' is the gpr register offset of CAN stop request.
> + maximum: 0xff
> + - description: The 'req_bit' is the bit offset of CAN stop request.
> + maximum: 0x1f
> +
> + fsl,clk-source:
> + description: |
> + Select the clock source to the CAN Protocol Engine (PE). It's SoC
> + implementation dependent. Refer to RM for detailed definition. If this
> + property is not set in device tree node then driver selects clock source 1
> + by default.
> + 0: clock source 0 (oscillator clock)
> + 1: clock source 1 (peripheral clock)
> + $ref: /schemas/types.yaml#/definitions/uint32
> + default: 1
> + minimum: 0
> + maximum: 1
> +
> + wakeup-source:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description:
> + Enable CAN remote wakeup.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + can@...00 {
> + compatible = "fsl,p1010-flexcan";
> + reg = <0x1c000 0x1000>;
> + interrupts = <48 0x2>;
> + interrupt-parent = <&mpic>;
> + clock-frequency = <200000000>;
> + fsl,clk-source = <0>;
> + };
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + can@...0000 {
> + compatible = "fsl,imx6q-flexcan";
> + reg = <0x02090000 0x4000>;
> + interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks 1>, <&clks 2>;
> + clock-names = "ipg", "per";
> + fsl,stop-mode = <&gpr 0x34 28>;
> + };
> diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> deleted file mode 100644
> index e10b6eb955e1..000000000000
> --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> +++ /dev/null
> @@ -1,57 +0,0 @@
> -Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
> -
> -Required properties:
> -
> -- compatible : Should be "fsl,<processor>-flexcan"
> -
> - where <processor> is imx8qm, imx6q, imx28, imx53, imx35, imx25, p1010,
> - vf610, ls1021ar2, lx2160ar1, ls1028ar1.
> -
> - The ls1028ar1 must be followed by lx2160ar1, e.g.
> - - "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"
> -
> - An implementation should also claim any of the following compatibles
> - that it is fully backwards compatible with:
> -
> - - fsl,p1010-flexcan
> -
> -- reg : Offset and length of the register set for this device
> -- interrupts : Interrupt tuple for this device
> -
> -Optional properties:
> -
> -- clock-frequency : The oscillator frequency driving the flexcan device
> -
> -- xceiver-supply: Regulator that powers the CAN transceiver
> -
> -- big-endian: This means the registers of FlexCAN controller are big endian.
> - This is optional property.i.e. if this property is not present in
> - device tree node then controller is assumed to be little endian.
> - if this property is present then controller is assumed to be big
> - endian.
> -
> -- fsl,stop-mode: register bits of stop mode control, the format is
> - <&gpr req_gpr req_bit>.
> - gpr is the phandle to general purpose register node.
> - req_gpr is the gpr register offset of CAN stop request.
> - req_bit is the bit offset of CAN stop request.
> -
> -- fsl,clk-source: Select the clock source to the CAN Protocol Engine (PE).
> - It's SoC Implementation dependent. Refer to RM for detailed
> - definition. If this property is not set in device tree node
> - then driver selects clock source 1 by default.
> - 0: clock source 0 (oscillator clock)
> - 1: clock source 1 (peripheral clock)
> -
> -- wakeup-source: enable CAN remote wakeup
> -
> -Example:
> -
> - can@...00 {
> - compatible = "fsl,p1010-flexcan";
> - reg = <0x1c000 0x1000>;
> - interrupts = <48 0x2>;
> - interrupt-parent = <&mpic>;
> - clock-frequency = <200000000>; // filled in by bootloader
> - fsl,clk-source = <0>; // select clock source 0 for PE
> - };
> --
> 2.28.0
>
Powered by blists - more mailing lists