netdev - Re: [PATCH v3 1/3] net: dsa: mv88e6xxx: Don't force link when using in-band-status

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <95c8cbb8-2364-b47b-851d-61a2c2ccf508@alliedtelesis.co.nz>
Date:   Tue, 20 Oct 2020 21:06:32 +0000
From:   Chris Packham <Chris.Packham@...iedtelesis.co.nz>
To:     Marek Behun <marek.behun@....cz>,
        Russell King - ARM Linux admin <linux@...linux.org.uk>
CC:     Andrew Lunn <andrew@...n.ch>,
        "vivien.didelot@...il.com" <vivien.didelot@...il.com>,
        "f.fainelli@...il.com" <f.fainelli@...il.com>,
        "olteanv@...il.com" <olteanv@...il.com>,
        "davem@...emloft.net" <davem@...emloft.net>,
        "kuba@...nel.org" <kuba@...nel.org>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 1/3] net: dsa: mv88e6xxx: Don't force link when using
 in-band-status


On 21/10/20 3:51 am, Marek Behun wrote:
> On Tue, 20 Oct 2020 15:15:25 +0100
> Russell King - ARM Linux admin <linux@...linux.org.uk> wrote:
>
>> On Tue, Oct 20, 2020 at 04:05:35PM +0200, Andrew Lunn wrote:
>>> On Tue, Oct 20, 2020 at 03:49:40PM +0200, Marek Behun wrote:
>>>> On Tue, 20 Oct 2020 11:15:52 +0100
>>>> Russell King - ARM Linux admin <linux@...linux.org.uk> wrote:
>>>>    
>>>>> On Tue, Oct 20, 2020 at 04:45:56PM +1300, Chris Packham wrote:
>>>>>> When a port is configured with 'managed = "in-band-status"' don't force
>>>>>> the link up, the switch MAC will detect the link status correctly.
>>>>>>
>>>>>> Signed-off-by: Chris Packham <chris.packham@...iedtelesis.co.nz>
>>>>>> Reviewed-by: Andrew Lunn <andrew@...n.ch>
>>>>> I thought we had issues with the 88E6390 where the PCS does not
>>>>> update the MAC with its results. Isn't this going to break the
>>>>> 6390? Andrew?
>>>>>    
>>>> Russell, I tested this patch on Turris MOX with 6390 on port 9 (cpu
>>>> port) which is configured in devicetree as 2500base-x, in-band-status,
>>>> and it works...
>>>>
>>>> Or will this break on user ports?
>>> User ports is what needs testing, ideally with an SFP.
>>>
>>> There used to be explicit code which when the SERDES reported link up,
>>> the MAC was configured in software with the correct speed etc. With
>>> the move to pcs APIs, it is less obvious how this works now, does it
>>> still software configure the MAC, or do we have the right magic so
>>> that the hardware updates itself.
>> It's still there. The speed/duplex etc are read from the serdes PHY
>> via mv88e6390_serdes_pcs_get_state(). When the link comes up, we
>> pass the negotiated link parameters read from there to the link_up()
>> functions. For ports where mv88e6xxx_port_ppu_updates() returns false
>> (no external PHY) we update the port's speed and duplex setting and
>> (currently, before this patch) force the link up.
>>
>> That was the behaviour before I converted the code, the one that you
>> referred to. I had assumed the code was correct, and _none_ of the
>> speed, duplex, nor link state was propagated from the serdes PCS to
>> the port on the 88E6390 - hence why the code you refer to existed.
>>
> Russell, you are right.
> SFP on 88E6390 does not work with this patch applied.
> So this patch breaks 88E6390.
Thanks for testing. It sounds like maybe if I make 
mv88e6xxx_port_ppu_updates() return true for the 6097 in serdes mode I 
can avoid the forced link up without affecting the 6390.