[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201027144924.22183-1-i.mikhaylov@yadro.com>
Date: Tue, 27 Oct 2020 17:49:22 +0300
From: Ivan Mikhaylov <i.mikhaylov@...ro.com>
To: "David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Po-Yu Chuang <ratbert@...aday-tech.com>
CC: Ivan Mikhaylov <i.mikhaylov@...ro.com>,
Joel Stanley <joel@....id.au>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
<netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<openbmc@...ts.ozlabs.org>
Subject: [PATCH v2 0/2] add ast2400/2500 phy-handle support
This patch introduces ast2400/2500 phy-handle support with an embedded
MDIO controller. At the current moment it is not possible to set options
with this format on ast2400/2500:
mac {
phy-handle = <&phy>;
phy-mode = "rgmii";
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy: ethernet-phy@0 {
compatible = "ethernet-phy-idxxxx.yyyy";
reg = <0>;
};
};
};
The patch fixes it and gets possible PHYs and register them with
of_mdiobus_register.
Changes from v2:
1. change manual phy interface type check on phy_interface_mode_is_rgmii
function.
2. add err_phy_connect label.
3. split ftgmac100_destroy_mdio into ftgmac100_phy_disconnect and
ftgmac100_destroy_mdio.
4. remove unneeded mdio_np checks.
Changes from v1:
1. split one patch into two.
Ivan Mikhaylov (2):
net: ftgmac100: move phy connect out from ftgmac100_setup_mdio
net: ftgmac100: add handling of mdio/phy nodes for ast2400/2500
drivers/net/ethernet/faraday/ftgmac100.c | 122 +++++++++++++----------
1 file changed, 71 insertions(+), 51 deletions(-)
--
2.21.1
Powered by blists - more mailing lists