| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201028171540.1700032-1-robert.hancock@calian.com>
Date: Wed, 28 Oct 2020 11:15:40 -0600
From: Robert Hancock <robert.hancock@...ian.com>
To: andrew@...n.ch, hkallweit1@...il.com
Cc: linux@...linux.org.uk, davem@...emloft.net, kuba@...nel.org,
netdev@...r.kernel.org, Robert Hancock <robert.hancock@...ian.com>
Subject: [PATCH net-next v5] net: phy: marvell: add special handling of Finisar modules with 88E1111
The Finisar FCLF8520P2BTL 1000BaseT SFP module uses a Marvel 88E1111 PHY
with a modified PHY ID. Add support for this ID using the 88E1111
methods.
By default these modules do not have 1000BaseX auto-negotiation enabled,
which is not generally desirable with Linux networking drivers. Add
handling to enable 1000BaseX auto-negotiation when these modules are
used in 1000BaseX mode. Also, some special handling is required to ensure
that 1000BaseT auto-negotiation is enabled properly when desired.
Based on existing handling in the AMD xgbe driver and the information in
the Finisar FAQ:
https://www.finisar.com/sites/default/files/resources/an-2036_1000base-t_sfp_faqreve1.pdf
Signed-off-by: Robert Hancock <robert.hancock@...ian.com>
Reviewed-by: Russell King <rmk+kernel@...linux.org.uk>
---
Changed since v4: Fixed coding style in m88e1111_config_init_1000basex.
drivers/net/phy/marvell.c | 100 +++++++++++++++++++++++++++++++++++-
include/linux/marvell_phy.h | 3 ++
2 files changed, 102 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 5aec673a0120..1f062e6699c8 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -80,8 +80,11 @@
#define MII_M1111_HWCFG_MODE_FIBER_RGMII 0x3
#define MII_M1111_HWCFG_MODE_SGMII_NO_CLK 0x4
#define MII_M1111_HWCFG_MODE_RTBI 0x7
+#define MII_M1111_HWCFG_MODE_COPPER_1000X_AN 0x8
#define MII_M1111_HWCFG_MODE_COPPER_RTBI 0x9
#define MII_M1111_HWCFG_MODE_COPPER_RGMII 0xb
+#define MII_M1111_HWCFG_MODE_COPPER_1000X_NOAN 0xc
+#define MII_M1111_HWCFG_SERIAL_AN_BYPASS BIT(12)
#define MII_M1111_HWCFG_FIBER_COPPER_RES BIT(13)
#define MII_M1111_HWCFG_FIBER_COPPER_AUTO BIT(15)
@@ -629,6 +632,51 @@ static int marvell_config_aneg_fiber(struct phy_device *phydev)
return genphy_check_and_restart_aneg(phydev, changed);
}
+static int m88e1111_config_aneg(struct phy_device *phydev)
+{
+ int extsr = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+ int err;
+
+ if (extsr < 0)
+ return extsr;
+
+ /* If not using SGMII or copper 1000BaseX modes, use normal process.
+ * Steps below are only required for these modes.
+ */
+ if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
+ (extsr & MII_M1111_HWCFG_MODE_MASK) !=
+ MII_M1111_HWCFG_MODE_COPPER_1000X_AN)
+ return marvell_config_aneg(phydev);
+
+ err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
+ if (err < 0)
+ goto error;
+
+ /* Configure the copper link first */
+ err = marvell_config_aneg(phydev);
+ if (err < 0)
+ goto error;
+
+ /* Do not touch the fiber page if we're in copper->sgmii mode */
+ if (phydev->interface == PHY_INTERFACE_MODE_SGMII)
+ return 0;
+
+ /* Then the fiber link */
+ err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE);
+ if (err < 0)
+ goto error;
+
+ err = marvell_config_aneg_fiber(phydev);
+ if (err < 0)
+ goto error;
+
+ return marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
+
+error:
+ marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
+ return err;
+}
+
static int m88e1510_config_aneg(struct phy_device *phydev)
{
int err;
@@ -814,6 +862,28 @@ static int m88e1111_config_init_rtbi(struct phy_device *phydev)
MII_M1111_HWCFG_FIBER_COPPER_AUTO);
}
+static int m88e1111_config_init_1000basex(struct phy_device *phydev)
+{
+ int extsr = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+ int err, mode;
+
+ if (extsr < 0)
+ return extsr;
+
+ /* If using copper mode, ensure 1000BaseX auto-negotiation is enabled */
+ mode = extsr & MII_M1111_HWCFG_MODE_MASK;
+ if (mode == MII_M1111_HWCFG_MODE_COPPER_1000X_NOAN) {
+ err = phy_modify(phydev, MII_M1111_PHY_EXT_SR,
+ MII_M1111_HWCFG_MODE_MASK |
+ MII_M1111_HWCFG_SERIAL_AN_BYPASS,
+ MII_M1111_HWCFG_MODE_COPPER_1000X_AN |
+ MII_M1111_HWCFG_SERIAL_AN_BYPASS);
+ if (err < 0)
+ return err;
+ }
+ return 0;
+}
+
static int m88e1111_config_init(struct phy_device *phydev)
{
int err;
@@ -836,6 +906,12 @@ static int m88e1111_config_init(struct phy_device *phydev)
return err;
}
+ if (phydev->interface == PHY_INTERFACE_MODE_1000BASEX) {
+ err = m88e1111_config_init_1000basex(phydev);
+ if (err < 0)
+ return err;
+ }
+
err = marvell_of_reg_init(phydev);
if (err < 0)
return err;
@@ -2658,7 +2734,28 @@ static struct phy_driver marvell_drivers[] = {
/* PHY_GBIT_FEATURES */
.probe = marvell_probe,
.config_init = m88e1111_config_init,
- .config_aneg = marvell_config_aneg,
+ .config_aneg = m88e1111_config_aneg,
+ .read_status = marvell_read_status,
+ .ack_interrupt = marvell_ack_interrupt,
+ .config_intr = marvell_config_intr,
+ .resume = genphy_resume,
+ .suspend = genphy_suspend,
+ .read_page = marvell_read_page,
+ .write_page = marvell_write_page,
+ .get_sset_count = marvell_get_sset_count,
+ .get_strings = marvell_get_strings,
+ .get_stats = marvell_get_stats,
+ .get_tunable = m88e1111_get_tunable,
+ .set_tunable = m88e1111_set_tunable,
+ },
+ {
+ .phy_id = MARVELL_PHY_ID_88E1111_FINISAR,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1111 (Finisar)",
+ /* PHY_GBIT_FEATURES */
+ .probe = marvell_probe,
+ .config_init = m88e1111_config_init,
+ .config_aneg = m88e1111_config_aneg,
.read_status = marvell_read_status,
.ack_interrupt = marvell_ack_interrupt,
.config_intr = marvell_config_intr,
@@ -2989,6 +3086,7 @@ static struct mdio_device_id __maybe_unused marvell_tbl[] = {
{ MARVELL_PHY_ID_88E1101, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1112, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1111, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1111_FINISAR, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1118, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1121R, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1145, MARVELL_PHY_ID_MASK },
diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
index ff7b7607c8cf..52b1610eae68 100644
--- a/include/linux/marvell_phy.h
+++ b/include/linux/marvell_phy.h
@@ -25,6 +25,9 @@
#define MARVELL_PHY_ID_88X3310 0x002b09a0
#define MARVELL_PHY_ID_88E2110 0x002b09b0
+/* Marvel 88E1111 in Finisar SFP module with modified PHY ID */
+#define MARVELL_PHY_ID_88E1111_FINISAR 0x01ff0cc0
+
/* The MV88e6390 Ethernet switch contains embedded PHYs. These PHYs do
* not have a model ID. So the switch driver traps reads to the ID2
* register and returns the switch family ID
--
2.18.4
Powered by blists - more mailing lists